| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: ensure minimal ethernet header on TX
As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have
at least eth header len bytes"), it is possible by for a local user with
eBPF TC hook access to attach a tc filter which truncates the packet and
redirects to an batadv interface. But the code assumes that at least
ETH_HLEN bytes are available and thus might read outside of the available
buffer.
The batadv_interface_tx() must therefore always check itself if enough data
is available for the ethernet header and don't rely on min_header_len. |
| Russh is a Rust SSH client & server library. Prior to 0.62.4, an authenticated SSH client can cause a denial of service by sending a pty-req channel request with more than 130 terminal-mode records. The parser in russh/src/server/encrypted.rs stores terminal modes in a fixed 130-entry [(Pty::TTY_OP_END, 0); 130] array but continues increasing the mode count, then constructs an out-of-bounds slice and panics before the application pty_request handler runs. The panic terminates the server session task without causing memory corruption. This issue is fixed in version 0.62.4. |
| Capstone is a disassembly framework. Prior to version 6.0.0-Alpha9, Capstone's WebAssembly backend accepts attacker-controlled raw WASM instruction bytes through the public `cs_disasm()` and `cs_disasm_iter()` APIs. For a large but well-formed `br_table` instruction, the WASM decoder accumulates the immediate length in a wider local variable but returns it through a `uint16_t` instruction-size path. When the encoded instruction length is exactly 65,536 bytes, the size wraps to zero and `cs_disasm()` can repeatedly decode the same instruction without advancing. For larger lengths, `cs_disasm_iter()` advances into the middle of the `br_table` payload and decodes target bytes as subsequent instructions. This is an availability and parser-integrity issue. Version 6.0.0-Alpha9 patches the issue. |
| Netatalk is a Free and Open Source file server suite for Unix-like operating systems. In versions 3.1.19 through 4.4.2, a stack-based buffer overflow exists in the deletedir() function of Netatalk's afpd daemon due to an integer underflow in the calculation of the remaining buffer size used for path construction. deletedir() is a utility function called when a file operation crosses a device boundary inside an AFP shared volume, which the standard library's renameat() cannot handle. The function attempts to prevent buffer overflows by tracking available space in a size_t remain variable. However, the arithmetic used to compute remain results in an unsigned integer underflow, causing the variable to become SIZE_MAX. Because of this, the subsequent boundary check always evaluates as safe, allowing an unbounded strcpy() operation to copy attacker-controlled filenames into a nearly full stack buffer. Version 4.4.3 patches the issue. |
| IBM i 7.6, 7.5, 7.4, and 7.3 could allow a remote attacker to cause a denial of service due to an out-of-bounds read. |
| IBM Documentation Offline 1.0.0 through 1.4.1 IBM Documentation could allow a remote attacker to obtain sensitive information due to a security misconfiguration where the documentation server binds to an unrestricted IP address. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: cache secctx size before release zeroes it
binder_transaction() bounds the scatter-gather buffer area with
sg_buf_end_offset and subtracts the aligned LSM context size because
the secctx is written at the tail of that area. The subtraction reads
lsmctx.len, but that field has already been cleared by the time the
line runs:
security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */
lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64))
extra_buffers_size += lsmctx_aligned_size
...
security_release_secctx(&lsmctx) /* memset zeroes len */
...
sg_buf_end_offset = sg_buf_offset + extra_buffers_size
- ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */
security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len
reads back as 0 and the subtraction contributes nothing, leaving
sg_buf_end_offset too large by the aligned secctx size on every
transaction to a txn_security_ctx node.
Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset -
sg_buf_offset as the sole upper bound on its copy, so the inflated end
offset lets the copy run into the bytes that already hold the secctx.
The aligned size must therefore be cached before release rather than
re-read from the now-cleared field. Fix by caching it in
lsmctx_aligned_size at function scope when it is first computed and
subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after
release. Reuse the same value for the earlier buf_offset computation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ife: require ETH_HLEN to be pullable in ife_decode()
ife decode may return after making only the outer IFE header and
metadata pullable. The caller then passes the decapsulated packet to
eth_type_trans(), which expects the inner Ethernet header to be
accessible from the linear data area.
With a malformed IFE frame, the inner Ethernet header may still be
shorter than ETH_HLEN in the linear area, which can lead to a crash in
the original code.
Fix this by extending the pull check in ife_decode() so that the inner
Ethernet header is also guaranteed to be pullable before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-control: Validate notification payload size
Validate MODULE_NOTIFICATION payload length before reading
bytes/channel data in control update handling. |
| Integer overflow or wraparound in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Stack-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges locally. |
| Zeroconf is a pure Python implementation of multicast DNS service discovery. Prior to 0.149.16, _read_character_string and _read_string in src/zeroconf/_protocol/incoming.py advanced self.offset by attacker-declared RDLENGTH without checking it against self._data_len, allowing unauthenticated hosts on the local link over UDP/5353 (224.0.0.251 / ff02::fb) to send a TXT, HINFO, or A/AAAA record with rdlength=65535 and seed DNSCache and ServiceInfo.properties with truncated, attacker-shaped key/value or address records. This issue is fixed in version 0.149.16. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink
xfrmi_changelink() operates on at most two netns, dev_net(dev) and the
interface link netns xi->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in xi->net can rewrite an interface that
lives in xi->net.
Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| Heap-based buffer overflow in Windows Installer allows an authorized attacker to elevate privileges locally. |
| D-Link DWR-M961 devices with hardware version C1 and software version 1.1.2_C1_202602110044 contain a buffer overflow vulnerability in the app.cgi interface. A remote attacker can write an overly long string to the netAcc.addlist[].name field and execute arbitrary commands by crafting a specific payload, or cause the device to crash. |
| New API is a large language mode (LLM) gateway and artificial intelligence (AI) asset management system. Prior to 1.0.0-rc.18, user-controlled image n, video seconds and duration, max_tokens, max_completion_tokens, maxOutputTokens, audio duration, and billing-expression quantities can overflow conversions in common/quota_math.go and related settlement paths, allowing a low-privileged account with positive balance or an active subscription to turn a negative charge into account credit and potentially drain upstream funds. This issue is fixed in version 1.0.0-rc.18. |
| Capstone is a disassembly framework. Prior to version 6.0.0-Alpha9, Capstone's public `cs_insn_name()` API forwards caller-supplied instruction IDs directly to the selected architecture backend. Most backends validate the ID before indexing instruction-name tables, but the M68K and RISCV backends have missing or incomplete bounds checks. On a Capstone handle opened for M68K or RISCV, a caller-controlled invalid instruction ID can trigger an out-of-bounds read and crash the process. The demonstrated impact is availability loss in applications or bindings that expose instruction-name lookup to untrusted IDs. No code execution or data disclosure was demonstrated. Version 6.0.0-Alpha9 patches the issue. |
| Zephyr's 6LoWPAN IP Header Compression (IPHC) uncompression code contains an out-of-bounds read in get_ihpc_inlined_size() (subsys/net/ip/6lo.c). The destination inline size is looked up in da_inline_size_table, which has 13 entries, using an index built from the M, DAC and DAM bits of the received IPHC dispatch word (iphc & NET_6LO_IPHC_DA_MASK, a 4-bit value of 0-15). The reserved combinations 13, 14 and 15 are not bounds-checked and read past the end of the table.
The iphc word is taken directly from the received frame, and get_ihpc_inlined_size() is reached on every inbound 6LoWPAN frame via net_6lo_uncompress() from the 802.15.4 receive path (subsys/net/l2/ieee802154/ieee802154_6lo.c and ieee802154_6lo_fragment.c). An unauthenticated attacker on the radio/adjacent link can therefore craft a frame whose destination addressing-mode nibble selects an out-of-range index, with no privileges or user interaction.
The out-of-bounds value becomes the computed inline_size, which then drives header reconstruction before the buffer-length check: it is used to dereference *(pkt->buffer->data + sizeof(iphc) + inline_size) and to compute a size_t diff that can underflow, leading to a further out-of-bounds read of the packet buffer and malformed uncompression. The practical impact is a radio-triggerable out-of-bounds read / denial-of-service on the receiver; the leaked byte is not returned to the attacker. The fix rejects any destination index beyond the table, aborting processing of the malformed frame. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: tt: prevent TVLV OOB check overflow
A TT unicast TVLV contains the number of VLANs stored in it. This number is
an u16 and gets multiplied by the size of the struct
batadv_tvlv_tt_vlan_data (8 bytes). The size can therefore overflow the u16
used to store the tt_vlan_len. All additional safety checks to prevent
out-of-bounds access of the TVLV buffer are invalid due to this overflow.
Using size_t prevents this overflow and ensures that the safety checks
compare against the actual buffer requirements. |
| The Google Cloud Secret Manager secrets backend in Apache Airflow's Google provider never applied the team scope when resolving Connections and Variables: the caller's `team_name` was accepted by the backend but dropped at the internal call boundary, so every lookup resolved against the team-agnostic secret name. In a deployment running multi-team mode with this backend, a task or Dag belonging to one team resolved another team's Connection or Variable, obtaining its credentials in full. No unusual configuration is required beyond enabling multi-team mode and using this backend. Users are advised to upgrade to apache-airflow-providers-google 22.3.0 or later, which builds and applies the team-scoped secret name. |
