| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: HCI: Remove HCI_AMP support
Since BT_HS has been remove HCI_AMP controllers no longer has any use so
remove it along with the capability of creating AMP controllers.
Since we no longer need to differentiate between AMP and Primary
controllers, as only HCI_PRIMARY is left, this also remove
hdev->dev_type altogether. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: f_ncm: Use unsigned int for ndp_index
The variable ndp_index is declared as a signed integer, but it stores
the return value of get_ncm(), which is unsigned.
A malicious host can supply a large offset that overflows the signed
ndp_index, making it negative. Because ndp_index is compared against
unsigned bounds, this negative value bypasses sanity checks and leads
to an out-of-bounds read when calculating the address of the NDP
block (ntb_ptr + ndp_index).
Fix this by changing ndp_index to unsigned int to ensure consistent
unsigned comparisons throughout the function. |
| The issue was addressed with improved memory handling. This issue is fixed in iOS 26.4 and iPadOS 26.4, macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.4, tvOS 26.4, visionOS 26.4, watchOS 26.4. An attacker may be able to cause unexpected system termination or read kernel memory. |
| Relative path traversal in Windows DNS allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
dmaengine: tegra: Fix burst size calculation
Currently, the Tegra GPC DMA hardware requires the transfer length to
be a multiple of the max burst size configured for the channel. When a
client requests a transfer where the length is not evenly divisible by
the configured max burst size, the DMA hangs with partial burst at
the end.
Fix this by reducing the burst size to the largest power-of-2 value
that evenly divides the transfer length. For example, a 40-byte
transfer with a 16-byte max burst will now use an 8-byte burst
(40 / 8 = 5 complete bursts) instead of causing a hang.
This issue was observed with the PL011 UART driver where TX DMA
transfers of arbitrary lengths were stuck. |
| In the Linux kernel, the following vulnerability has been resolved:
fpga: microchip-spi: fix zero header_size OOB read in mpf_ops_parse_header()
mpf_ops_parse_header() reads header_size from the bitstream at
MPF_HEADER_SIZE_OFFSET (24). When header_size is zero, the expression
*(buf + header_size - 1) reads one byte before the buffer start.
Since initial_header_size is set to 71 in mpf_ops, the fpga-mgr core
guarantees the buffer is large enough to reach MPF_HEADER_SIZE_OFFSET.
The only real gap is the zero header_size case, which cannot be
resolved by providing a larger buffer, so return -EINVAL. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: centalize $INDEX_ROOT header validation
Add a dedicated helper to perform stricter validation of $INDEX_ROOT and
use it for both directory inodes and named index inodes. This keeps the
root size and header geometry checks consistent across both read paths. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate index block header more strictly
Modify ntfs_index_block_inconsisent() to perform stricter validation of
INDEX_HEADER geometry in INDX blocks, and update
ntfs_lookup_inode_by_name() to use that function to validate INDX
blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: validate attribute values on lookup
ntfs_attr_find() and ntfs_external_attr_find() check that generic
resident attribute values fit in their attribute records and that
fixed-size resident values are large enough. For variable-length resident
formats, however, the fixed part is not enough: embedded length fields
can still point callers past the resident value.
A crafted image can set a small resident $FILE_NAME value_length while
leaving file_name_length large. Callers then trust file_name_length and
read past the resident value when converting or comparing the name. This
was reproduced with a crafted image under KASAN as a slab-out-of-bounds
read from the kmalloc-1k MFT record copy. The stack included
ntfs_lookup(), ntfs_iget(), ntfs_read_locked_inode(), ntfs_attr_name_get(),
ntfs_ucstonls(), and utf16s_to_utf8s().
Add a shared attribute value validator and use it before a lookup path
can return an attribute, including the AT_UNUSED enumeration case where
callers inspect returned attributes directly. The helper validates
resident value bounds, minimum resident value sizes, variable-length
$FILE_NAME fields, and non-resident mapping-pairs metadata that was
previously checked separately in both lookup paths.
This also preserves the intended resident @val matching semantics in the
external attribute lookup path. The old duplicated validation block
overwrote the actual resident value length with the type-specific minimum
length before comparing @val, so variable-length resident values could
fail to match even when the bytes were identical. Keep the comparison on
the actual value length, and make ntfs_attrlist_entry_add() compare
resident attributes with lowest_vcn zero instead of reading the
non-resident union member after a successful resident match.
Reject non-resident $FILE_NAME records too: the format requires
$FILE_NAME to be resident and callers treat returned records as resident. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix off-by-one in mapping pairs decoding bounds checks
In ntfs_mapping_pairs_decompress(), attr_end points one byte past the
end of the attribute record:
attr_end = (u8 *)attr + le32_to_cpu(attr->length);
The two bounds checks validating that mapping pair data bytes fit within
the attribute use strict greater-than (>), which allows a one-byte
out-of-bounds read when the data extends exactly to attr_end:
b = *buf & 0xf;
if (b) {
if (unlikely(buf + b > attr_end)) // off-by-one
goto io_error;
for (deltaxcn = (s8)buf[b--]; b; b--)
deltaxcn = (deltaxcn << 8) + buf[b];
}
When buf + b == attr_end, the check evaluates to false and buf[b] reads
one byte past the valid attribute boundary. The same pattern appears in
the LCN delta bytes check.
Fix both checks to use >= so that buf[b] at exactly attr_end is
correctly rejected as out of bounds. |
| A vulnerability was found in lwIP up to 2.2.1. Affected is the function snmp_parse_inbound_frame of the file src/apps/snmp/snmp_msg.c of the component snmpv3 USM Handler. Performing a manipulation of the argument msgAuthenticationParameters results in stack-based buffer overflow. The attack may be initiated remotely. The patch is named 0c957ec03054eb6c8205e9c9d1d05d90ada3898c. It is suggested to install a patch to address this issue. Two separate issue reports were submitted to the project. Their processing was merged as a duplicate. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: mcast: avoid OOB read of num_dests header
Before the access to struct batadv_tvlv_mcast_tracker's num_dests, it is
attempted to check whether enough space is actually in the network header.
But instead of using offsetofend() to check for the whole size (2) which
must be accessible, offsetof() of is called. The latter is always returning
0. The comparison with the network header length will always return that
enough data is available - even when only 1 or 0 bytes are accessible.
Instead of using offsetofend(), use the more common check for the whole
header. |
| In the Linux kernel, the following vulnerability has been resolved:
leds: uleds: Fix potential buffer overread
The name string supplied by userspace is not guaranteed to be
null-terminated, so using strchr() on it might result in a buffer
overread. The same thing will happen when said string is used by
the LED class device.
Fix this by using strnchr() instead and explicitly check that
the name string is properly null-terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: core: regulator_lock_two() should test for EDEADLK not EDEADLOCK
Compare against -EDEADLK, which is what ww_mutex_lock() actually
returns and what every other deadlock check in this file already uses.
Function regulator_lock_two() acquires two regulators via
regulator_lock_nested() -> ww_mutex_lock(). On contention,
ww_mutex_lock() returns -EDEADLK, which is the caller's signal to drop
the lock it holds and retry the acquisition in the canonical order.
However, regulator_lock_two() tests the return value against -EDEADLOCK
rather than -EDEADLK. On most architectures, EDEADLK and EDEADLOCK are
the same value, so the comparison happens to be correct and the bug is
invisible. But on MIPS, SPARC, and PowerPC, those two errors have
different values. The test is wrong: a genuine -EDEADLK backoff no
longer matches -EDEADLOCK, so instead of unlocking and retrying, the
code falls into WARN_ON(ret) and returns with only one of the two
regulators locked.
In practice, this is a bug only on MIPS, because the regulator core is
not built or used on the other two platforms.
In general, EDEADLK is preferred over EDEADLOCK for new code. |
| In the Linux kernel, the following vulnerability has been resolved:
qede: fix off-by-one in BD ring consumption on build_skb failure
qede_rx_build_skb() and qede_tpa_rx_build_skb() do not check for a
NULL return from qede_build_skb(). When it returns NULL under memory
pressure, the functions still consume a BD from the ring before
returning NULL. The callers then recycle additional BDs, resulting in
one extra BD being consumed (off-by-one). This desynchronizes the BD
ring, which can corrupt DMA page reference counts and lead to SLUB
freelist corruption.
Commit 4e910dbe3650 ("qede: confirm skb is allocated before using")
added a NULL check inside qede_build_skb() to prevent a NULL pointer
dereference, but did not address the missing NULL checks in the
callers, making this off-by-one reachable.
Fix this by adding NULL checks for the return value of
qede_build_skb() in both qede_rx_build_skb() and
qede_tpa_rx_build_skb(), returning NULL immediately before any BD ring
manipulation. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: vgic: Check the interrupt is still ours before migrating it
vgic_prune_ap_list() drops both ap_list_lock and irq_lock while migrating
an interrupt to another vCPU. After reacquiring the locks it only checks
that the affinity is unchanged (target_vcpu == vgic_target_oracle(irq))
before moving the interrupt, which assumes that an interrupt whose affinity
is preserved is still queued on this vCPU's ap_list.
That assumption no longer holds if the interrupt is taken off the ap_list
while the locks are dropped. vgic_flush_pending_lpis() removes the
interrupt from the list and sets irq->vcpu to NULL, but leaves
enabled/pending/target_vcpu untouched. As the interrupt is still enabled
and pending, vgic_target_oracle() returns the same target_vcpu, so the
affinity check passes and list_del() is run a second time on an entry that
has already been removed.
Also check that the interrupt is still assigned to this vCPU
(irq->vcpu == vcpu) before moving it. |
| In the Linux kernel, the following vulnerability has been resolved:
LoongArch: KVM: Check irq validity in kvm_vcpu_ioctl_interrupt()
Function kvm_vcpu_ioctl_interrupt() can be called from userspace, here
add irq validility cheking in kvm_vcpu_ioctl_interrupt(). |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: ensure inner headers in ICMP errors are in headroom
Sashiko points out that after stripping the outer headers
with pskb_pull() we should ensure the inner IP headers
in ICMP errors from tunnels are present in the skb headroom
for functions like ipv4_update_pmtu(), icmp_send() and
IP_VS_DBG().
Also, add more checks for the length of the inner headers. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Don't attempt to process FAST_REQ or EVENT relays
Currently defined VF/PF relay actions use regular REQUEST messages
only and the PF shouldn't attempt to handle FAST_REQUEST nor EVENT
messages as this would result in breaking the VFPF ABI protocol
and also might trigger an assert on the PF side.
(cherry picked from commit 1714d360fc5ae2e0886a69e979095d9c7ff3568a) |
| In the Linux kernel, the following vulnerability has been resolved:
net: sungem: fix probe error cleanup
gem_init_one() calls gem_remove_one() when register_netdev() fails.
gem_remove_one() unregisters and frees resources owned by the net_device,
including the DMA block, MMIO mapping, PCI regions, and the net_device
itself. gem_init_one() then falls through to its own cleanup labels and
frees the same resources again.
Keep the register_netdev() error path in gem_init_one(): clear drvdata so
PM/remove paths do not see a half-registered device, remove the NAPI
instance added during probe, and let the existing cleanup labels release
the resources once.
The issue was found by a local static-analysis checker for probe error
paths. The reported path was manually inspected before sending this fix.
Compile-tested with CONFIG_SUNGEM=y. Runtime testing was not performed
because no sungem hardware is available. |
