| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: hibernate: pass HVC_SET_VECTORS args to the resume hvc
swsusp_arch_suspend_exit() reinstalls the restored kernel's hyp stub
vectors with an hvc, but never passes the arguments. x0 is not set to
HVC_SET_VECTORS and x1 is not set to the vector address, so the stub
dispatch falls through and returns without writing vbar_el2. EL2 is
left pointing at the trans_pgd copy of the vectors, a page that
swsusp_free() releases right after resume.
Set the arguments up the same way __hyp_set_vectors() does.
Without this fix, Vladimir was able to trigger a hang when resuming from
hibernation with CONFIG_PAGE_POISONING=y and page_poison=on. |
| In the Linux kernel, the following vulnerability has been resolved:
seg6: set IPSKB_L3SLAVE from IP6SKB_L3SLAVE on IPIP decapsulation
When an SRv6 packet arrives on an interface enslaved to a VRF,
vrf_ip6_rcv() sets IP6SKB_L3SLAVE in IP6CB, but decap_and_validate()
has never set IPSKB_L3SLAVE in IPCB. The bit stayed clear in the
common case, and with CONFIG_IPV6_MIP6 the leftover frag_max_size of
a reassembled outer packet could even set it, with no VRF involved.
Commit 44930446dde4 ("ipv6: seg6: clear IPv4 control block on IPIP
decapsulation") then made the unreliable bit reliably clear.
The effect of the missing flag is visible with End.DX4 when a
delivery to a local address of the node reaches the socket lookup.
For example, a UDP socket bound to the enslaved ingress interface
does not receive any of the decapsulated packets, while an unbound
socket outside the VRF does.
This contradicts Documentation/networking/vrf.rst: by default the
scope of an unbound UDP or TCP socket is limited to the default VRF.
Set IPSKB_L3SLAVE for IPv4 in decap_and_validate(), which already does
the same for IPv6. The socket lookup then matches the decapsulated
packet like any other packet received on that enslaved interface. Such
a packet matches an unbound UDP or TCP socket only when
udp_l3mdev_accept or tcp_l3mdev_accept is set. |
| pH7Builder (pH7 Social Dating CMS) before 18.5.0 contains a path traversal vulnerability in the picture module deletePhoto() action that allows authenticated members to delete arbitrary files. Attackers can supply ../ sequences in the POST picture_link parameter to remove other members' photos or configuration and cache files, causing content loss and denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btintel_pcie: validate TX skb length in send_sync
btintel_pcie_prepare_tx() copies skb->len bytes into a fixed
BTINTEL_PCIE_BUFFER_SIZE (4096) DMA slot via an unchecked memcpy.
Oversized packets are currently rejected only in
btintel_pcie_send_frame(); any future caller of
btintel_pcie_send_sync() would silently overflow the DMA buffer.
Add the bounds check in btintel_pcie_send_sync() itself, right
before skb_push() and the DMA copy. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bridge: mst: move switchdev call outside rcu
This is a follow-up of one of sashiko's pre-existing bug reports.
br_mst_set_state() calls switchdev_port_attr_set() for nonzero MSTIs
while holding rcu_read_lock() which invokes the blocking switchdev
notifier chain and may sleep. Nonzero MSTI changes come from netlink
with rtnl held. Move the switchdev call before entering the rcu section and
assert that rtnl is held.
The call cannot be deferred because netlink needs its error and extack.
Also DSA reads the old bridge MST state during the callback and checks it.
A deferred callback will be late and will see the updated state. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: mxl862xx: disable the stats poll on teardown
mxl862xx_setup() arms the stats poll before mxl862xx_setup_mdio(), and
nothing stops it until dsa_register_switch() has returned an error to
mxl862xx_probe(). DSA frees the dsa_port list before it returns, so a
poll that fires once .setup or a later step of dsa_tree_setup() has
failed walks freed ports. On shutdown the user ports stay registered,
and the WORK_STOPPED flag test in mxl862xx_get_stats64() is not atomic
with the cancel in mxl862xx_shutdown(), so a re-arm that read the flag
before it was set queues the poll after cancel_delayed_work_sync() has
returned.
Arm the poll once .setup has succeeded and stop it from a .teardown op,
which DSA calls on unregister and after a failed registration, in both
cases before it frees the ports. Use disable_delayed_work_sync() there
and in shutdown(): it drains a running poll as the cancel did and turns
every later attempt to queue the work into a no-op, so the re-arm
cannot bring the poll back. remove() and the probe error path only set
WORK_STOPPED, which crc_err_work tests before it walks the ports. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix handling of NFSEXP_PNFS in the netlink codepath
The rework of how block layouts were checked moved the check for
NFSEXP_PNFS out of nfsd4_setup_layout_type() and into the callers. That
patch didn't account for the new call in nfsd4_setup_layout_type(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: coredump: Quiesce dump work on unregister
hci_devcd_handle_pkt_init() arms dump_timeout and coredump producers
queue dump_rx without holding an hdev reference. Unregister leaves both
works live, so disconnecting during an active dump lets them access hdev
after hci_release_dev() frees it.
Shut down coredump processing during unregister. Close the producer gate
under dump_q.lock before disabling both works, then free the active buffer
and queued packets under hci_dev_lock. Serializing the gate with enqueue
prevents controller-specific workers from adding packets after the final
purge. |
| The WooCommerce Bookings WordPress plugin before 3.11.0 does not limit a user-supplied value before using it to allocate memory in one of its unauthenticated AJAX actions, allowing unauthenticated attackers to exhaust server memory and cause a Denial of Service with a single request. |
| The WeddingCity Lite WordPress plugin through 1.0.4 does not perform any authorisation or validity checks before deleting posts, pages and media attachments, allowing unauthenticated attackers to permanently delete arbitrary content site-wide. |
| The WP Posts Password Batch Manager WordPress plugin through 1.1 does not perform any capability or nonce check on a bulk post-password action that runs on an always-loaded admin handler, allowing unauthenticated attackers to reset or overwrite the password of every published post, disclosing password-protected content or locking all posts behind an attacker-chosen password. |
| The HootBoard WordPress plugin through 3.1.4 does not perform any authorisation check on some of its REST endpoints, and does not escape the values stored through them before outputting them in a public page, allowing unauthenticated users to inject arbitrary web scripts that will execute in the browser of anyone visiting that page, including administrators. |
| The KeyWord Collector WordPress plugin through 1.4 does not have any authorisation or nonce check when saving its settings, and does not escape them before output, allowing unauthenticated attackers to store malicious JavaScript that executes when an administrator opens the KeyWord Collector WordPress plugin through 1.4's settings page or when a visitor loads a page displaying its output. |
| The Mobile builder WordPress plugin through 1.4.2 does not properly restrict which user meta keys a logged-in user can update through one of its REST routes, allowing any user with a self-registered account, such as a customer, to grant themselves the administrator role. |
| The BuddyPress Instant Chat WordPress plugin through 1.6 does not check that the sender of a chat message belongs to the conversation it is being added to, nor does it escape message content before outputting it back, allowing unauthenticated users to store arbitrary web scripts that will execute in the session of any member who later views that conversation. |
| The Topcontent WordPress plugin through 1.2.1 does not properly authorise one of its request handlers and disables HTML sanitisation before storing the submitted content, allowing unauthenticated attackers to publish arbitrary posts containing malicious JavaScript on any site where its API key has never been configured. |
| The WpCues Basic Quiz WordPress plugin through 1.6.5 does not properly sanitise and escape values before using them in a SQL statement, which allows unauthenticated attackers to perform SQL injection attacks and read data from the database. |
| In the Linux kernel, the following vulnerability has been resolved:
rust: devres: fix race between concurrent revokers
There is a potential race condition when two paths try to revoke a
Devres concurrently.
The driver core's devres_release_all() calls Revocable::revoke() via the
release callback, while Devres::drop() calls revoke_nosync() on another
CPU.
The revoker that does not claim the is_available swap returns
immediately, but the revoker that did may still be executing
drop_in_place() on the inner data. This can cause a use-after-free when
the other revoker's caller proceeds to drop adjacent resources that
drop_in_place() still references (e.g., Devres<DmaMappedSgt> racing with
SGTable freeing the backing sg_table and pages).
Fix this by adding a Completion. The release callback signals the
Completion after revoke() finishes, and Devres::drop() waits for it when
it loses the is_available swap. This ensures the wrapped object is fully
torn down before Devres::drop() returns. |
| Executable Regular Expression Error vulnerability in WP Media WP Rocket wp-rocket allows Code Injection.This issue affects WP Rocket: from n/a before 3.23.5. |
| The Post Grid Gutenberg Blocks – PostX plugin for WordPress is vulnerable to Stored Cross-Site Scripting via display_name User Field in all versions up to, and including, 5.1.0 due to insufficient input sanitization and output escaping. This makes it possible for unauthenticated attackers to inject arbitrary web scripts in pages that will execute whenever a user accesses an injected page. WordPress core's pre_user_display_name filter encodes &, <, and > but leaves double-quotes intact (ENT_NOQUOTES), allowing a Subscriber-level user to store a double-quote in their display_name via /wp-admin/profile.php that subsequently breaks out of the alt="" attribute at Archive_Title.php:144. |
