| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
powerpc/spufs: fix out-of-bounds access in spufs_mem_mmap_access()
spufs_mem_mmap_access() computes the local store offset as
address - vma->vm_start, but bounds-checks it against vma->vm_end
instead of the local store size. On 64-bit, offset is always well
below vma->vm_end, so the clamp never fires and len stays unbounded
against the LS_SIZE buffer returned by ctx->ops->get_ls().
Reject offsets at or beyond LS_SIZE and clamp len to the remaining
space, mirroring the guard already used by spufs_mem_mmap_fault() and
spufs_ps_fault(). |
| In the Linux kernel, the following vulnerability has been resolved:
tracing/user_events: Fix use-after-free in user_event_mm_dup()
user_event_mm_dup() walks the parent mm's enabler list locklessly under
rcu_read_lock() during fork() (from copy_process()); it does not take
event_mutex:
rcu_read_lock();
list_for_each_entry_rcu(enabler, &old_mm->enablers, mm_enablers_link)
enabler->event = user_event_get(orig->event);
user_event_enabler_destroy() removes an enabler from that list with
list_del_rcu() and then, without waiting for a grace period, drops the
enabler's user_event reference with user_event_put() and frees the enabler
with kfree(). A reader that loaded the enabler before the list_del_rcu()
can still be walking it, which leads to two use-after-frees:
- kfree(enabler) frees the enabler while that reader dereferences
enabler->event.
- user_event_put() may drop the last reference to the user_event, which
is then freed (via delayed_destroy_user_event() on a work queue), while
the same reader does user_event_get(orig->event) on it.
Both are reachable by an unprivileged task that can open user_events_data:
one multithreaded process that registers an enabler and then concurrently
unregisters it and calls fork() triggers the race. KASAN reports a
slab-use-after-free in user_event_mm_dup() during clone(), with a
"refcount_t: addition on 0" warning when the user_event is freed.
The enabler use-after-free was found first; the user_event one was reported
by XIAO WU, and the earlier enabler-only fix did not address it.
Defer both the user_event_put() and the kfree(enabler) to a work item
queued with queue_rcu_work(), so they run only after an RCU grace period,
once all readers walking the enabler list have finished. The put must run
in process context because user_event_put() takes event_mutex on the last
reference, so a work queue is used rather than call_rcu(). The now-unlocked
put lets the locked argument of user_event_enabler_destroy() be removed;
all callers are updated. |
| In the Linux kernel, the following vulnerability has been resolved:
dibs: loopback: validate offset and size in move_data()
The loopback move_data() performs a memcpy into the registered DMB
without checking whether offset + size exceeds the DMB length. Unlike
real ISM hardware, which enforces memory region bounds natively, the
software loopback has no such protection.
A peer-supplied out-of-bounds offset or oversized write would result in
an OOB write past the allocated kernel buffer. Add an explicit bounds
check before the memcpy to reject such requests with -EINVAL. |
| IBM Storage Scale 5.2.3.0 through 5.2.3.8, and 6.0.0.0 through 6.0.1.0 GUI contains a hardcoded token in the source code, which was used for inter-node cluster communication and REST API authentication between GUI. |
| In the Linux kernel, the following vulnerability has been resolved:
drivers/base/memory: set mem->altmap after successful device registration
If __add_memory_block() fails at xa_store() (under memory pressure for
example), device_unregister() is called, which eventually triggers
memory_block_release() with mem->altmap still set, causing a
WARN_ON(mem->altmap). This was triggered by modifying virtio-mem driver.
Fix this by delaying the assignment of mem->altmap until after
__add_memory_block() has succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: Use caller client for debug BO sync
amdxdna_drm_sync_bo_ioctl() looks up args->handle in the ioctl caller's
drm_file. For SYNC_DIRECT_FROM_DEVICE, it then calls
amdxdna_hwctx_sync_debug_bo(), but passes abo->client.
amdxdna_hwctx_sync_debug_bo() uses the passed client both as the handle
namespace for debug_bo_hdl and as the owner of the hardware context xarray.
Those must match the file that supplied args->handle. The BO's stored
client pointer is object state, not the ioctl context.
Pass filp->driver_priv instead, matching the original handle lookup. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: ensure minimal ethernet header on TX
As documented in commit 8bd67ebb50c0 ("net: bridge: xmit: make sure we have
at least eth header len bytes"), it is possible by for a local user with
eBPF TC hook access to attach a tc filter which truncates the packet and
redirects to an batadv interface. But the code assumes that at least
ETH_HLEN bytes are available and thus might read outside of the available
buffer.
The batadv_interface_tx() must therefore always check itself if enough data
is available for the ethernet header and don't rely on min_header_len. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/monwriter: Reject buffer reuse with different data length
When data buffers are reused, e.g. for interval sample records, the
first record determines the data length, and the size of the buffer for
user copy. Current monwriter code does not check if the data length was
changed for subsequent records, which also would never happen for valid
user programs.
However, a malicious user could change the data length, resulting in out
of bounds user copy to the kernel buffer, and memory corruption. By
default, the monwriter misc device is created with root-only permissions,
so practical impact is typically low.
Fix this by checking for changed data length and rejecting such records. |
| In the Linux kernel, the following vulnerability has been resolved:
tpm: tpm2-sessions: wait for async KPP completion in tpm_buf_append_salt
tpm_buf_append_salt() in drivers/char/tpm/tpm2-sessions.c calls
crypto_kpp_generate_public_key() and crypto_kpp_compute_shared_secret()
without installing a completion callback, discards both return values,
and immediately frees the kpp_request via kpp_request_free(). When the
resolved ecdh-nist-p256 KPP backend is asynchronous (atmel-ecc, HPRE,
keembay-ocs), either operation returns -EINPROGRESS and the deferred
completion worker dereferences the freed request.
The path fires automatically from the hwrng_fillfn kernel thread via
tpm_get_random -> tpm2_get_random -> tpm2_start_auth_session ->
tpm_buf_append_salt on every entropy poll, without any userland action.
Install crypto_req_done as the completion callback, wrap both KPP
operations in crypto_wait_req(), and propagate errors to the caller.
The wait is a no-op for synchronous backends. |
| In the Linux kernel, the following vulnerability has been resolved:
binder: cache secctx size before release zeroes it
binder_transaction() bounds the scatter-gather buffer area with
sg_buf_end_offset and subtracts the aligned LSM context size because
the secctx is written at the tail of that area. The subtraction reads
lsmctx.len, but that field has already been cleared by the time the
line runs:
security_secid_to_secctx(secid, &lsmctx) /* lsmctx.len set */
lsmctx_aligned_size = ALIGN(lsmctx.len, sizeof(u64))
extra_buffers_size += lsmctx_aligned_size
...
security_release_secctx(&lsmctx) /* memset zeroes len */
...
sg_buf_end_offset = sg_buf_offset + extra_buffers_size
- ALIGN(lsmctx.len, sizeof(u64)) /* ALIGN(0,8) */
security_release_secctx() does memset(cp, 0, sizeof(*cp)), so lsmctx.len
reads back as 0 and the subtraction contributes nothing, leaving
sg_buf_end_offset too large by the aligned secctx size on every
transaction to a txn_security_ctx node.
Each BINDER_TYPE_PTR object then derives buf_left = sg_buf_end_offset -
sg_buf_offset as the sole upper bound on its copy, so the inflated end
offset lets the copy run into the bytes that already hold the secctx.
The aligned size must therefore be cached before release rather than
re-read from the now-cleared field. Fix by caching it in
lsmctx_aligned_size at function scope when it is first computed and
subtracting lsmctx_aligned_size instead of re-reading lsmctx.len after
release. Reuse the same value for the earlier buf_offset computation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ife: require ETH_HLEN to be pullable in ife_decode()
ife decode may return after making only the outer IFE header and
metadata pullable. The caller then passes the decapsulated packet to
eth_type_trans(), which expects the inner Ethernet header to be
accessible from the linear data area.
With a malformed IFE frame, the inner Ethernet header may still be
shorter than ETH_HLEN in the linear area, which can lead to a crash in
the original code.
Fix this by extending the pull check in ife_decode() so that the inner
Ethernet header is also guaranteed to be pullable before returning. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: SOF: ipc4-control: Validate notification payload size
Validate MODULE_NOTIFICATION payload length before reading
bytes/channel data in control update handling. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-auth: reject short AUTH_RECEIVE buffers
nvmet_execute_auth_receive() trusts the AUTH_RECEIVE allocation length
after checking only that it is nonzero and matches the transfer length.
In the SUCCESS1 and FAILURE1/default states, that lets a remote NVMe-oF
initiator reach the fixed-size DH-HMAC-CHAP response builders with a
kmalloc() buffer shorter than the response, so nvmet_auth_success1() and
nvmet_auth_failure1() write past the allocation; both only WARN_ON the
short length and then format the message anyway.
Impact: A remote NVMe-oF initiator with access to an auth-enabled target
can trigger a 16-byte heap out-of-bounds write via a one-byte
AUTH_RECEIVE allocation length.
Compute the minimum response length for the current DH-HMAC-CHAP step in
nvmet_auth_receive_data_len() and report a zero data length when the
host-supplied allocation length is shorter, so the existing zero-length
check in nvmet_execute_auth_receive() rejects the command before any
builder runs. The SUCCESS1 minimum is sizeof(struct
nvmf_auth_dhchap_success1_data) plus the HMAC hash length, because the
response hash is written into the rval[] flexible-array tail, so the
minimum is state dependent rather than a flat sizeof. CHALLENGE keeps its
existing variable-length guard in nvmet_auth_challenge().
This is reachable only when in-band DH-HMAC-CHAP authentication is
configured on the target. |
| In the Linux kernel, the following vulnerability has been resolved:
xfrm: xfrm_interface: require CAP_NET_ADMIN in the device netns for changelink
xfrmi_changelink() operates on at most two netns, dev_net(dev) and the
interface link netns xi->net. They differ once the device is created in
or moved to a netns other than the one the request runs in. The rtnl
changelink path checks CAP_NET_ADMIN only against dev_net(dev), so a
caller privileged there but not in xi->net can rewrite an interface that
lives in xi->net.
Gate xfrmi_changelink() on rtnl_dev_link_net_capable() at its top,
before any attribute is parsed. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: close durable scavenger races against m_fp_list lookups
ksmbd_durable_scavenger() has two related races against any walker
that iterates f_ci->m_fp_list, including ksmbd_lookup_fd_inode()
(used by ksmbd_vfs_rename) and the share-mode checks in
fs/smb/server/smb_common.c.
(1) fp->node list-head reuse. Durable-preserved handles can remain
linked on f_ci->m_fp_list after session teardown so share-mode checks
still see them while the handle is reconnectable. The scavenger
collected expired handles by adding fp->node to a local
scavenger_list after removing them from the global durable idr.
Because fp->node is the same list_head used by m_fp_list,
list_add(&fp->node, &scavenger_list) overwrites the m_fp_list links
and corrupts both lists. CONFIG_DEBUG_LIST can report this on the
share-mode walk path.
(2) Refcount race against m_fp_list walkers. The scavenger qualifies
an expired durable handle with atomic_read(&fp->refcount) > 1 and
fp->conn under global_ft.lock, removes fp from global_ft, then drops
global_ft.lock before unlinking fp from m_fp_list and freeing it.
During that gap fp is still linked on m_fp_list with f_state ==
FP_INITED. ksmbd_lookup_fd_inode() under m_lock read calls
ksmbd_fp_get() (atomic_inc_not_zero on refcount that is still 1) and
takes a live reference; the scavenger then unlinks and frees fp
while the holder owns a reference, leading to UAF on the holder's
subsequent ksmbd_fd_put() and on any field reads performed by a
concurrent share-mode walker that iterates m_fp_list without taking
ksmbd_fp_get() (smb_check_perm_dleases-like paths).
Fix both:
* Stop reusing fp->node as a scavenger-private list node. Remove
one expired handle from global_ft under global_ft.lock, take an
explicit transient reference, drop the lock, unlink fp->node
from m_fp_list under f_ci->m_lock, then drop both the durable
lifetime and transient references with atomic_sub_and_test(2,
&fp->refcount). If the scavenger is the last putter the close
runs there; otherwise an in-flight holder that already raced
through the m_fp_list lookup owns the final close via its
ksmbd_fd_put() path. The one-at-a-time disposal can rescan the
durable idr when multiple handles expire in the same pass, but
durable scavenging is a background expiration path and the final
full scan recomputes min_timeout before the next wait.
* Clear fp->persistent_id inside __ksmbd_remove_durable_fd() right
after idr_remove(), so a delayed final close from a holder that
snatched fp does not re-issue idr_remove() on a persistent id
that idr_alloc_cyclic() in ksmbd_open_durable_fd() may have
already handed out to a brand-new durable handle.
* Bypass the per-conn open_files_count decrement in
__put_fd_final() when fp is detached from any session table
(fp->conn cleared by session_fd_check() at durable preserve --
paired with the volatile_id clear at unpublish, so checking
fp->conn alone is sufficient). The walker that owns the final
close runs from an unrelated work->conn whose
stats.open_files_count never tracked this durable fp; without
this guard the holder would underflow that unrelated counter.
The two races are folded into one patch because patch (1) alone
cleans up the corrupted list but leaves a deterministic UAF window
for m_fp_list walkers that the transient-reference and
persistent_id discipline in (2) close; bisecting onto an
intermediate state would land on a UAF that pre-patch chaos merely
made less reproducible.
Validation:
* CONFIG_DEBUG_LIST coverage for the list_head reuse path.
* KASAN-enabled direct SMB2 durable-handle coverage that exercised
ksmbd_durable_scavenger() and non-NULL ksmbd_lookup_fd_inode()
returns while durable handles expired under concurrent rename
lookups, with no KASAN, UAF, list-corruption, ODEBUG, or WARNING
reports.
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
platform/x86: uniwill-laptop: Do not enable the charging limit even when forced
It seems that on some older models (~2020) the battery charging limit
can permanently damage the battery. Prevent users from enabling this
feature thru the "force" module parameter to avoid causing permanent
hardware damage on such devices. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btmtk: fix urb->setup_packet leak in error paths
The setup_packet of control urb is not freed if usb_submit_urb fails or
the submitted urb is killed. Add free in these two paths. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: wilc1000: fix dma_buffer leak on bus acquire failure
wilc_wlan_firmware_download() allocates dma_buffer with kmalloc() at
the top of the function and uses a 'fail:' label to free it via
kfree(dma_buffer) on error.
All later error paths correctly use 'goto fail' to route through this
cleanup. However, the early failure path after the first acquire_bus()
call uses a bare 'return ret;', which leaks dma_buffer whenever the bus
acquire fails.
Replace the early return with goto fail so the existing cleanup path
runs.
Found via a custom Coccinelle semantic patch hunting for kmalloc'd
locals leaked on early-return error paths in driver firmware-download
code. |
| In the Linux kernel, the following vulnerability has been resolved:
pds_core: fix debugfs_lookup dentry leak and error handling
debugfs_lookup() returns a dentry with an elevated reference count that
must be released with dput(). The current code discards the returned
dentry without calling dput(), causing a reference leak on every
firmware reset recovery.
Additionally, when CONFIG_DEBUG_FS is disabled, debugfs_lookup()
returns ERR_PTR(-ENODEV), not NULL. The current check passes for error
pointers and would call dput() on an invalid pointer, causing a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: modedb: fix a possible UAF in fb_find_mode()
If mode_option is NULL, it is assigned from mode_option_buf:
if (!mode_option) {
fb_get_options(NULL, &mode_option_buf);
mode_option = mode_option_buf;
}
Later, name is assigned from mode_option:
const char *name = mode_option;
However, mode_option_buf is freed before name is no longer used:
kfree(mode_option_buf);
while name is still accessed by:
if ((name_matches(db[i], name, namelen) ||
Since name aliases mode_option_buf, this may result in a
use-after-free.
Fix this by extending the lifetime of mode_option_buf until the end of the
function by using scope-based resource management for cleanup. |
