| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
mm/memory-failure: fix deadlock when hugetlb_optimize_vmemmap is enabled
When I did hard offline test with hugetlb pages, below deadlock occurs:
======================================================
WARNING: possible circular locking dependency detected
6.8.0-11409-gf6cef5f8c37f #1 Not tainted
------------------------------------------------------
bash/46904 is trying to acquire lock:
ffffffffabe68910 (cpu_hotplug_lock){++++}-{0:0}, at: static_key_slow_dec+0x16/0x60
but task is already holding lock:
ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40
which lock already depends on the new lock.
the existing dependency chain (in reverse order) is:
-> #1 (pcp_batch_high_lock){+.+.}-{3:3}:
__mutex_lock+0x6c/0x770
page_alloc_cpu_online+0x3c/0x70
cpuhp_invoke_callback+0x397/0x5f0
__cpuhp_invoke_callback_range+0x71/0xe0
_cpu_up+0xeb/0x210
cpu_up+0x91/0xe0
cpuhp_bringup_mask+0x49/0xb0
bringup_nonboot_cpus+0xb7/0xe0
smp_init+0x25/0xa0
kernel_init_freeable+0x15f/0x3e0
kernel_init+0x15/0x1b0
ret_from_fork+0x2f/0x50
ret_from_fork_asm+0x1a/0x30
-> #0 (cpu_hotplug_lock){++++}-{0:0}:
__lock_acquire+0x1298/0x1cd0
lock_acquire+0xc0/0x2b0
cpus_read_lock+0x2a/0xc0
static_key_slow_dec+0x16/0x60
__hugetlb_vmemmap_restore_folio+0x1b9/0x200
dissolve_free_huge_page+0x211/0x260
__page_handle_poison+0x45/0xc0
memory_failure+0x65e/0xc70
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x387/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xca/0x1e0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
other info that might help us debug this:
Possible unsafe locking scenario:
CPU0 CPU1
---- ----
lock(pcp_batch_high_lock);
lock(cpu_hotplug_lock);
lock(pcp_batch_high_lock);
rlock(cpu_hotplug_lock);
*** DEADLOCK ***
5 locks held by bash/46904:
#0: ffff98f6c3bb23f0 (sb_writers#5){.+.+}-{0:0}, at: ksys_write+0x64/0xe0
#1: ffff98f6c328e488 (&of->mutex){+.+.}-{3:3}, at: kernfs_fop_write_iter+0xf8/0x1d0
#2: ffff98ef83b31890 (kn->active#113){.+.+}-{0:0}, at: kernfs_fop_write_iter+0x100/0x1d0
#3: ffffffffabf9db48 (mf_mutex){+.+.}-{3:3}, at: memory_failure+0x44/0xc70
#4: ffffffffabf92ea8 (pcp_batch_high_lock){+.+.}-{3:3}, at: zone_pcp_disable+0x16/0x40
stack backtrace:
CPU: 10 PID: 46904 Comm: bash Kdump: loaded Not tainted 6.8.0-11409-gf6cef5f8c37f #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.14.0-0-g155821a1990b-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x68/0xa0
check_noncircular+0x129/0x140
__lock_acquire+0x1298/0x1cd0
lock_acquire+0xc0/0x2b0
cpus_read_lock+0x2a/0xc0
static_key_slow_dec+0x16/0x60
__hugetlb_vmemmap_restore_folio+0x1b9/0x200
dissolve_free_huge_page+0x211/0x260
__page_handle_poison+0x45/0xc0
memory_failure+0x65e/0xc70
hard_offline_page_store+0x55/0xa0
kernfs_fop_write_iter+0x12c/0x1d0
vfs_write+0x387/0x550
ksys_write+0x64/0xe0
do_syscall_64+0xca/0x1e0
entry_SYSCALL_64_after_hwframe+0x6d/0x75
RIP: 0033:0x7fc862314887
Code: 10 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b7 0f 1f 00 f3 0f 1e fa 64 8b 04 25 18 00 00 00 85 c0 75 10 b8 01 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 51 c3 48 83 ec 28 48 89 54 24 18 48 89 74 24
RSP: 002b:00007fff19311268 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
RAX: ffffffffffffffda RBX: 000000000000000c RCX: 00007fc862314887
RDX: 000000000000000c RSI: 000056405645fe10 RDI: 0000000000000001
RBP: 000056405645fe10 R08: 00007fc8623d1460 R09: 000000007fffffff
R10: 0000000000000000 R11: 0000000000000246 R12: 000000000000000c
R13: 00007fc86241b780 R14: 00007fc862417600 R15: 00007fc862416a00
In short, below scene breaks the
---truncated--- |
| In Django 3.2 before 3.2.22, 4.1 before 4.1.12, and 4.2 before 4.2.6, the django.utils.text.Truncator chars() and words() methods (when used with html=True) are subject to a potential DoS (denial of service) attack via certain inputs with very long, potentially malformed HTML text. The chars() and words() methods are used to implement the truncatechars_html and truncatewords_html template filters, which are thus also vulnerable. NOTE: this issue exists because of an incomplete fix for CVE-2019-14232. |
| In Django 3.2 before 3.2.21, 4.1 before 4.1.11, and 4.2 before 4.2.5, django.utils.encoding.uri_to_iri() is subject to a potential DoS (denial of service) attack via certain inputs with a very large number of Unicode characters. |
| In Django 3.2 before 3.2.20, 4 before 4.1.10, and 4.2 before 4.2.3, EmailValidator and URLValidator are subject to a potential ReDoS (regular expression denial of service) attack via a very large number of domain name labels of emails and URLs. |
| eventlet before 0.35.2, as used in dnspython before 2.6.0, allows remote attackers to interfere with DNS name resolution by quickly sending an invalid packet from the expected IP address and source port, aka a "TuDoor" attack. In other words, dnspython does not have the preferred behavior in which the DNS name resolution algorithm would proceed, within the full time window, in order to wait for a valid packet. NOTE: dnspython 2.6.0 is unusable for a different reason that was addressed in 2.6.1. |
| A ReDoS issue was discovered in the URI component through 0.12.0 in Ruby through 3.2.1. The URI parser mishandles invalid URLs that have specific characters. It causes an increase in execution time for parsing strings to URI objects. The fixed versions are 0.12.1, 0.11.1, 0.10.2 and 0.10.0.1. |
| In PHP versions before 7.4.31, 8.0.24 and 8.1.11, the vulnerability enables network and same-site attackers to set a standard insecure cookie in the victim's browser which is treated as a `__Host-` or `__Secure-` cookie by PHP applications. |
| Undici is an HTTP/1.1 client, written from scratch for Node.js. An attacker can alter the `integrity` option passed to `fetch()`, allowing `fetch()` to accept requests as valid even if they have been tampered. This vulnerability was patched in version(s) 5.28.4 and 6.11.1. |
| Undici is an HTTP/1.1 client, written from scratch for Node.js. Undici cleared Authorization and Proxy-Authorization headers for `fetch()`, but did not clear them for `undici.request()`. This vulnerability was patched in version(s) 5.28.4 and 6.11.1. |
| Git is a revision control system. Prior to versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1, a specially crafted `.gitmodules` file with submodule URLs that are longer than 1024 characters can used to exploit a bug in `config.c::git_config_copy_or_rename_section_in_file()`. This bug can be used to inject arbitrary configuration into a user's `$GIT_DIR/config` when attempting to remove the configuration section associated with that submodule. When the attacker injects configuration values which specify executables to run (such as `core.pager`, `core.editor`, `core.sshCommand`, etc.) this can lead to a remote code execution. A fix A fix is available in versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1. As a workaround, avoid running `git submodule deinit` on untrusted repositories or without prior inspection of any submodule sections in `$GIT_DIR/config`. |
| A ReDoS issue was discovered in the Time component through 0.2.1 in Ruby through 3.2.1. The Time parser mishandles invalid URLs that have specific characters. It causes an increase in execution time for parsing strings to Time objects. The fixed versions are 0.1.1 and 0.2.2. |
| In Git for Windows, the Windows port of Git, no localized messages are shipped with the installer. As a consequence, Git is expected not to localize messages at all, and skips the gettext initialization. However, due to a change in MINGW-packages, the `gettext()` function's implicit initialization no longer uses the runtime prefix but uses the hard-coded path `C:\mingw64\share\locale` to look for localized messages. And since any authenticated user has the permission to create folders in `C:\` (and since `C:\mingw64` does not typically exist), it is possible for low-privilege users to place fake messages in that location where `git.exe` will pick them up in version 2.40.1.
This vulnerability is relatively hard to exploit and requires social engineering. For example, a legitimate message at the end of a clone could be maliciously modified to ask the user to direct their web browser to a malicious website, and the user might think that the message comes from Git and is legitimate. It does require local write access by the attacker, though, which makes this attack vector less likely. Version 2.40.1 contains a patch for this issue. Some workarounds are available. Do not work on a Windows machine with shared accounts, or alternatively create a `C:\mingw64` folder and leave it empty. Users who have administrative rights may remove the permission to create folders in `C:\`. |
| Git is a revision control system. Prior to versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1, by feeding specially crafted input to `git apply --reject`, a path outside the working tree can be overwritten with partially controlled contents (corresponding to the rejected hunk(s) from the given patch). A fix is available in versions 2.30.9, 2.31.8, 2.32.7, 2.33.8, 2.34.8, 2.35.8, 2.36.6, 2.37.7, 2.38.5, 2.39.3, and 2.40.1. As a workaround, avoid using `git apply` with `--reject` when applying patches from an untrusted source. Use `git apply --stat` to inspect a patch before applying; avoid applying one that create a conflict where a link corresponding to the `*.rej` file exists. |
| NULL Pointer Dereference allows attackers to cause a denial of service (or application crash). This only applies when lxml is used together with libxml2 2.9.10 through 2.9.14. libxml2 2.9.9 and earlier are not affected. It allows triggering crashes through forged input data, given a vulnerable code sequence in the application. The vulnerability is caused by the iterwalk function (also used by the canonicalize function). Such code shouldn't be in wide-spread use, given that parsing + iterwalk would usually be replaced with the more efficient iterparse function. However, an XML converter that serialises to C14N would also be vulnerable, for example, and there are legitimate use cases for this code sequence. If untrusted input is received (also remotely) and processed via iterwalk function, a crash can be triggered. |
| The cgi gem before 0.1.0.2, 0.2.x before 0.2.2, and 0.3.x before 0.3.5 for Ruby allows HTTP response splitting. This is relevant to applications that use untrusted user input either to generate an HTTP response or to create a CGI::Cookie object. |
| In PHP versions 8.1.* before 8.1.29, 8.2.* before 8.2.20, 8.3.* before 8.3.8, due to a code logic error, filtering functions such as filter_var when validating URLs (FILTER_VALIDATE_URL) for certain types of URLs the function will result in invalid user information (username + password part of URLs) being treated as valid user information. This may lead to the downstream code accepting invalid URLs as valid and parsing them incorrectly. |
| Jinja is an extensible templating engine. The `xmlattr` filter in affected versions of Jinja accepts keys containing non-attribute characters. XML/HTML attributes cannot contain spaces, `/`, `>`, or `=`, as each would then be interpreted as starting a separate attribute. If an application accepts keys (as opposed to only values) as user input, and renders these in pages that other users see as well, an attacker could use this to inject other attributes and perform XSS. The fix for CVE-2024-22195 only addressed spaces but not other characters. Accepting keys as user input is now explicitly considered an unintended use case of the `xmlattr` filter, and code that does so without otherwise validating the input should be flagged as insecure, regardless of Jinja version. Accepting _values_ as user input continues to be safe. This vulnerability is fixed in 3.1.4. |
| pgjdbc, the PostgreSQL JDBC Driver, allows attacker to inject SQL if using PreferQueryMode=SIMPLE. Note this is not the default. In the default mode there is no vulnerability. A placeholder for a numeric value must be immediately preceded by a minus. There must be a second placeholder for a string value after the first placeholder; both must be on the same line. By constructing a matching string payload, the attacker can inject SQL to alter the query,bypassing the protections that parameterized queries bring against SQL Injection attacks. Versions before 42.7.2, 42.6.1, 42.5.5, 42.4.4, 42.3.9, and 42.2.28 are affected. |
| urllib3 is a user-friendly HTTP client library for Python. urllib3 previously wouldn't remove the HTTP request body when an HTTP redirect response using status 301, 302, or 303 after the request had its method changed from one that could accept a request body (like `POST`) to `GET` as is required by HTTP RFCs. Although this behavior is not specified in the section for redirects, it can be inferred by piecing together information from different sections and we have observed the behavior in other major HTTP client implementations like curl and web browsers. Because the vulnerability requires a previously trusted service to become compromised in order to have an impact on confidentiality we believe the exploitability of this vulnerability is low. Additionally, many users aren't putting sensitive data in HTTP request bodies, if this is the case then this vulnerability isn't exploitable. Both of the following conditions must be true to be affected by this vulnerability: 1. Using urllib3 and submitting sensitive information in the HTTP request body (such as form data or JSON) and 2. The origin service is compromised and starts redirecting using 301, 302, or 303 to a malicious peer or the redirected-to service becomes compromised. This issue has been addressed in versions 1.26.18 and 2.0.7 and users are advised to update to resolve this issue. Users unable to update should disable redirects for services that aren't expecting to respond with redirects with `redirects=False` and disable automatic redirects with `redirects=False` and handle 301, 302, and 303 redirects manually by stripping the HTTP request body. |
| urllib3 is a user-friendly HTTP client library for Python. urllib3 doesn't treat the `Cookie` HTTP header special or provide any helpers for managing cookies over HTTP, that is the responsibility of the user. However, it is possible for a user to specify a `Cookie` header and unknowingly leak information via HTTP redirects to a different origin if that user doesn't disable redirects explicitly. This issue has been patched in urllib3 version 1.26.17 or 2.0.5. |
