| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Skip Update HDCP Config In Transition State
Transition state does not have a valid dm_stream_ctx that should skip
configuring HDCP routine. The routine is valid to go through only when
a valid stream is created. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: write-protect folios during data writeback
commit 095be159f3eb ("btrfs: unify folio dirty flag clearing") replaced
the folio_clear_dirty_for_io() call in extent_write_cache_pages() with a
plain folio_test_dirty() check. Besides clearing the dirty flag,
folio_clear_dirty_for_io() also calls folio_mkclean(), which write-protects
the shared mmap PTEs mapping the folio. Note that we still do call
folio_clear_dirty_for_io() later in submit_one_sector() when we clear
dirty on the last sector of the folio (the only sector for non-subpage
cases). But we lost this early call in extent_write_cache_pages().
Without the extra write-protection, a process with the file mmap-ed can
modify a sector while it is being used by writeback in a way that
expects a stable folio (checksumming, compressing, copying, etc...)
without faulting, which manifests as a handful of concrete bugs.
1. For large folios or subpage sectorsize, it is possible to submit a bio
which does not cover the whole folio. When this happens, we will have a
bio in flight for a folio that we have *not* called
folio_clear_dirty_for_io() on. If a task with an existing mmap-ed PTE
writes (without faulting..) in this window, it can result in
corruptions. If the write arrives while the checksumming or writing itself
is underway, this can result in an invalid checksum and later corruption
reports on read. If the write arrives after checksumming/writing is done
but before the last sector dirty is cleared, then the write is present
in page cache but doesn't affect the dirty tracking and will be lost
when the folio is fully finished being submitted and the dirty bit
is cleared. This results in losing the write even if fsync() is called.
2. For zoned submissions which are done in batch separate from the main
extent_writepage() loop, we also risk csum violations for those
submissions. Zoned writes are clamped to max_zone_append_size and are
not aligned with folios, so a submission can span two folios. The first
folio being processed in extent_write_cache_pages() will call
extent_write_locked_range() which will submit the partial range of the
next folio, while the rest of that folio could still be dirty. So
clearing dirty on the submitted sectors doesn't call
folio_clear_dirty_for_io() and we have the same issue. Since
extent_write_cache_pages() skips these batch submitted folios (they are
already marked for writeback from submission by the preceding folio), we
must add the extra write protection in lock_delalloc_folios().
3. For inline extents this will subtly risk losing writes that happen
after/while we copy the inline extent but before we clear dirty on
the folio.
4. For folios spanning EOF, mmap could tamper with the zeroed bytes past
EOF and cause them to be persisted where future faults would improperly
see them instead of zeros.
5. Finally, for compressed extents, we risk modifying the folios while we
work on compressing them which will result in corrupted compressed data.
Specifically, in run_delalloc_compressed() we queue up work to do
compress_file_range() in BTRFS_COMPRESSION_CHUNK_SIZE (512K) chunks which
will call btrfs_folio_clamp_clear_dirty() on the range. For non-subpage,
this will always clear the whole folio, safely. For subpage, we risk a
partial clear here as well. In particular, imagine a 2M folio broken up
into 512K chunks of work which might start compression work on one chunk
before all the chunks compress_file_range() workers have gotten far
enough to finish clearing all the dirty bitmaps of the folio and getting
to folio_clear_dirty_for_io(). Large folios on the edges of submission
ranges are similarly at risk to be only partly cleared.
This particular gap was introduced by a second patch in the same series:
commit a4ef54dbb576 ("btrfs: make extent_range_clear_dirty_for_io() to handle sector size < page size cases")
We cannot simply restore the call to folio_clear
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
fs: fix user path of nested backing files
backing_file_open() derives the path to be stored in the new backing
file from user_file->f_path. This is incorrect when user_file itself
is a backing file, which is the case for nested stacking filesystems,
e.g. overlayfs mounts where the lowerdir of one overlayfs is the merged
directory of another. Since commit def3ae83da02 ("fs: store real path
instead of fake path in backing file f_path") the f_path of a backing
file holds the real path of the intermediate layer, not the path that
the user opened.
Commit 924577e4f6ca ("ovl: Fix nested backing file paths") fixed this
for such configurations by passing file_user_path() from
ovl_open_realfile(). However, commit 6af36aeb147a ("lsm: add
backing_file LSM hooks") changed the first argument of
backing_file_open() from the user path back to the user file and
derived the path from user_file->f_path again, silently re-introducing
the problem.
As a result, files mapped through a nested overlayfs show the wrong
path in /proc/<pid>/maps and in perf/ftrace mmap records. For example,
with two nested overlayfs mounts:
mkdir -p /ovl/{lower,upper,work,merged} /ovl/nested
echo hello > /ovl/lower/foo
mount -t overlay overlay \
-o lowerdir=/ovl/lower,upperdir=/ovl/upper,workdir=/ovl/work \
/ovl/merged
# at least two lowerdirs are needed when upperdir is nonexistent
mount -t overlay overlay \
-o lowerdir=/ovl/merged:/ovl/lower /ovl/nested
mapping /ovl/nested/foo shows a disconnected path instead of the user
path:
# readlink /proc/self/fd/3
/ovl/nested/foo
# grep foo /proc/self/maps
7f6e2c100000-7f6e2c101000 r--s 00000000 00:24 15813027 /foo
The bogus path is derived from the f_path of the intermediate backing
file, whose mount is a private clone that d_path() cannot resolve.
Fix this by using file_user_path(), which returns the outermost
user-visible path for backing files and falls back to
&user_file->f_path for regular files. This restores the behavior of
commit 924577e4f6ca ("ovl: Fix nested backing file paths") for
overlayfs and also fixes the same problem for the other
backing_file_open() callers, fuse passthrough and erofs ishare, when
their user file is itself a backing file.
backing_tmpfile_open() has the same pattern but is not affected: it is
only called by ovl_create_tmpfile() for the upper layer, and another
overlayfs is rejected as upperdir by the DCACHE_OP_REAL check in
ovl_mount_dir_check(), so its user_file can never be a backing file. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: typec: thunderbolt: Disable work before freeing tbt on remove
tbt_altmode_remove() drops the plug and cable references without
draining tbt->work. The work function dereferences those references,
and can also requeue itself in its error path. The VDM callbacks can
queue the same work item.
Disable and drain tbt->work before dropping the references. This waits
for an existing invocation and prevents subsequent schedule_work()
calls from queueing it during teardown.
This issue was found by an in-house static analysis tool and confirmed
by manual code review. |
| In the Linux kernel, the following vulnerability has been resolved:
PCI/sysfs: Fix out-of-bounds read in pci_write_legacy_io()
pci_write_legacy_io() loads 4 bytes from the kernfs write buffer
regardless of how many bytes userspace wrote:
if (count != 1 && count != 2 && count != 4)
return -EINVAL;
return pci_legacy_write(bus, off, *(u32 *)buf, count);
kernfs_fop_write_iter() allocates the buffer with kmalloc(len + 1),
so a 1-byte write to the legacy_io sysfs file allocates 2 bytes and
the unconditional u32 load reads up to 2 bytes past the end of the
allocation, which KASAN reports as a slab-out-of-bounds read.
Similarly, a 2-byte write overreads by 1 byte.
Thus, read only the number of bytes requested using get_unaligned_le16()
and get_unaligned_le32() for the 2 and 4 byte cases, interpreting the
buffer as little-endian to match the byte ordering of PCI I/O port
space.
The PowerPC implementation previously compensated for the generic
code's native-endian 32-bit load by shifting the value into place
for the 1 and 2 byte cases. The shifts were only correct on
big-endian kernels.
On little-endian PowerPC (POWER8 and later), they extracted the wrong
bytes, so a 1-byte write wrote an out-of-bounds byte instead of the
requested value. On big-endian, the native load also caused out_le16()
and out_le32() to reverse the user's bytes on the wire for 2 and 4 byte
writes. The little-endian helpers resolve both issues, so the shifts
are removed.
No changes are needed for the Alpha platform.
The legacy_io file is root-only and exists only on Alpha and PowerPC,
the two architectures that define HAVE_PCI_LEGACY. |
| In the Linux kernel, the following vulnerability has been resolved:
phy: rockchip-samsung-dcphy: fix out-of-range max_register
The PHY register block is 64KB, so with a register stride of 4 the
last accessible register sits at offset 0xfffc. max_register names
0x10000, one register past the end of the mapping: dumping the
registers through the regmap debugfs interface reads beyond the
ioremapped region and oopses on the unmapped page. The oops fires
with the regmap lock held, so later PHY operations deadlock. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS: fix delegation_hash_table leak when nfs4_server_common_setup() fails
nfs4_server_common_setup() allocates server->delegation_hash_table
first, but server->destroy - the only path that frees the table via
nfs4_destroy_server() - is not assigned until the very end of the
function. If any intermediate step fails (the is_ds_only_client()
check, nfs4_init_session(), nfs4_get_rootfh(), or nfs_probe_server()),
the function returns with server->destroy still NULL, so the caller's
nfs_free_server() skips the destroy callback and the hash table is
leaked (4 KiB per attempt with the default delegation watermark).
This is trivially reachable from userspace: every failed NFSv4 mount
leaks one allocation. A client that persistently retries a mount that
cannot succeed leaks kernel memory without bound. Observed in
production where a Longhorn backup poller retried mount.nfs4 against
an NFSv3-only server roughly 10 times per second, leaking ~3.4 GiB of
unreclaimable slab (kmalloc-rnd-13-4k) per day; the node accumulated
12 GiB of leaked slab before the source was identified via the
kmem:kmalloc tracepoint (call_site=nfs4_delegation_hash_alloc).
Reproducer:
# server exports NFSv3 only (or export path absent for v4)
while :; do mount -t nfs4 <server>:/missing /mnt; done
# watch SUnreclaim in /proc/meminfo grow 4 KiB per iteration
Free the table on the error paths between the allocation and the
assignment of server->destroy. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: validate nseconds in TIME_DELEG decode paths
The xdrgen-based TIME_DELEG_ACCESS and TIME_DELEG_MODIFY decode arms
store a raw uint32_t nseconds directly into tv_nsec without enforcing
nseconds < NSEC_PER_SEC. The legacy nfsd4_decode_nfstime4 has this
check but the TIME_DELEG paths do not. A malformed timespec can
propagate through notify_change() to disk.
Add range checks in both nfs4xdr.c (SETATTR path) and
nfs4callback.c (CB_GETATTR path). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: fix dentry ref leak on V4ROOT export filehandle lookup
nfsd_set_fh_dentry() leaks the dentry reference from
exportfs_decode_fh_raw() when the NFS3_FHSIZE or NFS_FHSIZE
switch cases detect NFSEXP_V4ROOT and goto out. The out: label
calls exp_put() but never dput(dentry), and fhp->fh_dentry was
never assigned so fh_put() cannot compensate.
A crafted NFSv3 filehandle targeting a V4ROOT export's fsid
triggers the leak on every request. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Prevent post-shutdown use-after-free in unlock_filesystem
Writing a filesystem path to /proc/fs/nfsd/unlock_filesystem runs
nfsd4_cancel_copy_by_sb() before nfsd_mutex is held and before the
handler confirms that nn->nfsd_serv is set. Once nfsd has shut down,
nfs4_state_destroy_net() has freed nn->conf_id_hashtbl but left the
pointer intact, so the cancel helper iterates freed slab memory as an
array of struct list_head and then dereferences a bogus nfs4_client
when it takes clp->async_lock. A local administrator holding
CAP_SYS_ADMIN can reach this use-after-free by stopping the server and
then writing to unlock_filesystem; KASAN reports a slab-use-after-free
read in nfsd4_cancel_copy_by_sb().
nfsd4_revoke_states() walks the same state tables and for that reason
already runs only under nfsd_mutex with nn->nfsd_serv confirmed
present. Move the async COPY cancel into that protected section so
every NFSv4 state-table walker on this path observes a running server.
Async copies exist only while the server runs, so gating the cancel on
nn->nfsd_serv loses nothing. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: fix NULL dereference and integer overflow in rocket_job_push()
rocket_job_push() allocates a temporary array to hold all input and
output GEM object pointers:
bos = kvmalloc_array(job->in_bo_count + job->out_bo_count,
sizeof(void *), GFP_KERNEL);
memcpy(bos, job->in_bos, job->in_bo_count * sizeof(void *));
memcpy(&bos[job->in_bo_count], job->out_bos, ...);
Two bugs exist:
1. Missing NULL check: if kvmalloc_array() fails, bos is NULL and
the subsequent memcpy() dereferences it, causing a kernel NULL
pointer dereference.
2. Integer overflow: in_bo_count and out_bo_count are both u32, set
directly from userspace-supplied in_bo_handle_count and
out_bo_handle_count with no prior validation. Their sum is computed
in u32 arithmetic and can wrap to a smaller value, causing the
allocation count passed to kvmalloc_array() to be smaller than
intended. Subsequent uses still operate on the original counts when
copying and locking objects, which may lead to out-of-bounds accesses
on the temporary array.
Fix by using check_add_overflow() to detect count overflow before the
allocation, and adding a NULL check on the allocation result. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: initialize job domain before cleanup paths
rocket_ioctl_submit_job() releases rjob through rocket_job_put() on
allocation error paths. rocket_job_cleanup() unconditionally calls
rocket_iommu_domain_put(job->domain), but job->domain is assigned only
after task copying and BO lookups. A failure before that assignment can
therefore clean up a job with a NULL domain pointer.
Take the per-file domain reference before the first error path can release
rjob. Also clear rjob->tasks after freeing it in rocket_copy_tasks(), so
the common cleanup path cannot free the task array again after a task-copy
error. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/rocket: Fix error path handling in rocket_job_run()
In rocket_job_run(), after taking an extra fence reference for
job->done_fence via dma_fence_get(), the error paths have three bugs:
- The dma_fence reference held by job->done_fence is never released,
causing a reference leak.
- pm_runtime_get_sync() increments the usage counter even on failure,
but the error path does not decrement it, leaking the runtime PM
reference and preventing the NPU from suspending.
- A valid but unsignaled fence is returned to the DRM scheduler,
which triggers WARN("Fence ... released with pending signals!")
when the scheduler drops its reference.
Fix by replacing pm_runtime_get_sync() with pm_runtime_resume_and_get()
which auto-balances the usage counter on failure, releasing both fence
references on error, and returning ERR_PTR(ret) instead of the
unsignaled fence.
[tomeu: Refactored error paths to use consolidated goto labels] |
| In the Linux kernel, the following vulnerability has been resolved:
dm-io: clone the source bio instead of copying its biovec
For DM_IO_BIO requests, do_region() built each destination bio by walking
the source bio's biovec and re-adding the pages one at a time, tracking
the remaining transfer in sectors. The vector lengths are byte granular
and need not be sector aligned (e.g. a misaligned O_DIRECT buffer split
across pages), so the sector-based accounting could lose a sub-sector
fragment: to_sector() truncated the remainder and the outer loop spun
forever submitting empty bios, hanging the I/O.
There is no need to rebuild the biovec at all. The destination reads into
(or writes from) exactly the same pages as the source bio, so the bio can
simply clone the source's biovec with bio_alloc_clone() and remap it to
the target device. The clone inherits the source's iterator and alignment,
and the block layer splits it to the target's limits on submission, so the
whole region maps to a single cloned bio with no manual page copying or
sector accounting.
This removes the per-page copy path (and its open-coded bvec dpages
helpers) for bio-backed I/O and fixes the hang on misaligned direct I/O to
a dm-mirror device. Page-list, vma and kmem sources keep the existing copy
path. |
| In the Linux kernel, the following vulnerability has been resolved:
svcrdma: Reject oversized Read segments at decode time
The RPC/RDMA Read list decoder stores wire-supplied segment
lengths without validation. xdr_count_read_segments() checks
4-byte alignment for non-zero position values but does not
cap the segment length.
An oversized rs_length reaches svc_rdma_build_read_segment(),
which derives nr_bvec from it and can drive a large dynamic
bvec allocation before verifying that enough rq_pages remain.
If the post-allocation page-overrun guard fires, the freshly
acquired rw context is not returned, leaking the resource.
Reject any segment whose length exceeds the receive context's
page budget during Read list decoding, consistent with how
xdr_check_write_chunk() bounds Write segment counts against
rc_maxpages. Also return the rw context on the existing
post-allocation overrun path in svc_rdma_build_read_segment(),
keeping that defensive guard balanced. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Replace SCX_RQ_BAL_KEEP with a dispatch verdict return
SCX_RQ_BAL_KEEP tells the pick to keep running the previous task, a leftover
from when balancing and picking were separate operations. An rq-level flag
only works while dispatches and picks pair up one to one, which core
scheduling breaks: selections interleave through dispatch's lock drops and a
pick can consume a stale flag, keeping a task that has since been dequeued.
Fixing core scheduling support requires the decision to travel with the
dispatch that made it. Make scx_dispatch_sched() and balance_one() return an
explicit verdict instead and drop the flag's plumbing from the tools autogen
enum headers.
Also factor the pick-side invocation, its follow-up queueing and the
post-dispatch checks out of do_pick_task_scx() into dispatch_pick(). No
functional changes intended.
v2: Drop the SCX_RQ_BAL_KEEP plumbing from the tools autogen enum headers
as well (Andrea). |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix this_rq() assumptions in dispatch kfuncs
Under core scheduling, dispatch runs from within the core-wide pick and can
target a sibling rq, so ops.dispatch() may execute on a CPU different from
the dispatched rq's. Several kfunc paths assumed the two always coincide:
- scx_dsq_move() decided whether an rq lock is held by testing this_rq()'s
rq flags and lock-danced accordingly. A dispatch for a sibling took the
unlocked-context branch and acquired the source rq lock on top of the
already held dispatched rq lock which could deadlock.
- scx_bpf_sub_dispatch() dispatched this_rq() with its stashed
sub_dispatch_prev, which is NULL when dispatching for a sibling.
- finish_dispatch(), scx_bpf_dsq_reenq() and scx_bpf_dsq_nr_queued()
resolved SCX_DSQ_LOCAL to this CPU's local DSQ rather than the dispatched
rq's. The latter two are callable from other rq-locked operations too,
where SCX_DSQ_LOCAL now likewise resolves to the op's rq. This changes
behavior also without core scheduling, e.g. for ops.enqueue() running a
remote wakeup on the waking CPU, and is intended: which CPU happens to
execute an operation is incidental, the op's rq is what it is operating
on, and the resolution now matches the insert side where SCX_DSQ_LOCAL
dispatches land on the task's rq.
Use the rq tracked by scx_locked_rq(), which is set to the dispatched rq
around ops invocations and NULL in unlocked contexts. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix rq->core_pick corruption under core scheduling
Core scheduling's pick_next_task() picks what to run on every SMT sibling of
the core in a single pass under the shared core-wide rq lock. The selection
state is consistent only while the lock is held continuously, so
->pick_task() originally could not release it. However, since 4c95380701f5
("sched/ext: Fold balance_scx() into pick_task_scx()"), sched_ext runs
dispatch from inside the pick and dispatching can drop the rq lock. To
support this, pick_next_task() has been updated to restart the whole
selection when a pick returns RETRY_TASK after releasing the lock.
When selections on the same core interleave through the dropped lock, they
corrupt each other's state: one clears the other's rq->core_pick leading to
a NULL deref, or invalidates its keep-the-previous-task decision leaving a
dequeued task running, which deadlocks the next wakeup and matches the
reported hard hangs. A cookied ping-pong load on an SMT machine makes the
interleavings frequent and kills the kernel within seconds.
Fix it by making the pick return RETRY_TASK whenever dispatch released the
rq lock, so that a selection only ever commits picks made under a
continuously held lock. The previous patch's rq->scx.lock_drop_seq counts
the releases. A dispatch that touched nothing never releases the lock and
its verdict, including "nothing to run", stands: retries are bounded, each
following a dispatch that actually did something, and an idle CPU does not
loop.
If another dispatch is already in flight on the rq, skip dispatching and
pick from what is already queued locally - the in-flight dispatch has
released the lock, so its own selection will retry and re-pick this rq,
while returning RETRY_TASK here would only spin on the lock that dispatch
needs to finish.
Balance callbacks must run in the context that queued them, so they can only
be queued on the CPU's own rq. When dispatching for another rq, run the
deferred work directly instead - that rq may consume all its picks through
the core-sched fast path and never queue the callback itself.
The put_prev_task_scx() warning about a runnable task being left behind
assumed that dispatch ran as part of the very pick that is switching away.
That now only holds on the non-core path, so gate it and drop the
cookie-match test, which is always true without core scheduling, from its
condition. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Don't BUG_ON a destroyed DSQ in process_deferred_reenq_users
scx_bpf_dsq_reenq() queues a deferred reenq (dru) that runs from
run_deferred(), not ops.dispatch(). If the DSQ is destroyed before the dru
runs, process_deferred_reenq_users() sees dsq->id == SCX_DSQ_INVALID and
hits the BUG_ON. destroy_dsq() doesn't flush pending drus, so just skip.
tj: Read dsq->id once with READ_ONCE(). Reading it separately in the INVALID
check and the BUG_ON would leave a window where destroy_dsq() can
invalidate the id between the two reads and still trigger the BUG_ON. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/ionic: Embed counter driver data in rdma_counter allocation
Commit 7e53b31acc7f ("RDMA/core: Create and destroy rdma_counter using
rdma_zalloc_drv_obj()") requires drivers implementing counter ops to
embed struct rdma_counter in a driver-specific struct, register its size
via INIT_RDMA_OBJ_SIZE, and provide a counter_init callback.
The ionic driver was merged without this adaptation, causing a NULL
pointer dereference in alloc_and_bind() since rdma_zalloc_drv_obj()
allocates zero bytes when size_rdma_counter is unset.
Consolidate struct ionic_counter into a new struct ionic_rdma_counter
that embeds struct rdma_counter, replace the xarray with a lightweight
ida for ID allocation, and add the required counter_init and
INIT_RDMA_OBJ_SIZE declarations. |
