| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: bound the persisted tail-position offset
cache_pos_decode() takes the persisted key_tail and dirty_tail seg_off from
the cache device and addresses within the segment with it. A seg_off at or
past the segment data_size, controllable by whoever supplies the device
(CAP_SYS_ADMIN), reads past the segment data.
Reject a decoded seg_off that is not below the segment data_size. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: clamp the tail kset read to the segment data region
The tail-kset read in cache_replay(), the writeback worker and the GC
worker bounds its length by PCACHE_SEG_SIZE - seg_off, the raw segment
size rather than the data region. A tail near the segment end reads past
the segment data into the following control area.
Clamp the read to cache_seg_remain(), the data region. |
| In the Linux kernel, the following vulnerability has been resolved:
dm-pcache: fix use-after-free and invalid seg operations in kset_replay()
In kset_replay, when key->seg_gen is stale (key->seg_gen <
key->cache_pos.cache_seg->gen), cache_key_put(key) is called but then
key->cache_pos.cache_seg is accessed as the argument to cache_seg_get().
This is a use-after-free on the freed key memory. Although mempool
recycled memory is not immediately reclaimed or overwritten in practice,
this is still a potential UAF bug.
Additionally, for expired invalid keys, setting the cache->seg_map bit
and calling cache_seg_get() is unreasonable since the corresponding
segment data is no longer valid.
Fix both issues by moving cache_seg_get() and __set_bit() after the
gen check, so they only execute for valid keys, and using continue to
skip invalid keys. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: Fix unlocked dereference of dev->desc in i3c_device_get_supported_xfer_mode()
i3c_device_get_supported_xfer_mode() uses dev->desc to obtain the
master controller. However, dev->desc must not be dereferenced unless
bus->lock is held, and this function does not take that lock.
The function only needs access to the master controller associated with
the device's bus. Use dev->bus instead, which is always valid for the
lifetime of the device and does not require dereferencing dev->desc. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: master: adi: initialize the lock before enabling interrupts
adi_i3c_master_probe() requests the IRQ and unmasks REG_IRQ_PENDING_CMDR
before the controller's IBI state, transfer queue list and transfer
queue lock are initialized. A pending CMDR interrupt can therefore run
adi_i3c_master_irq() and take master->xferqueue.lock before the dynamic
lock has been initialized.
This issue was found by our static analysis tool and then manually
reviewed against the current tree.
The grounded PoC kept the probe ordering and the IRQ path
adi_i3c_master_probe() -> adi_i3c_master_irq() -> xferqueue.lock, with a
pending CMDR interrupt arriving after REG_IRQ_PENDING_CMDR is unmasked.
Lockdep reported:
INFO: trying to register non-static key.
you didn't initialize this object before use?
lock_acquire+0xbb/0x290
_raw_spin_lock_irqsave+0x36/0x60
adi_i3c_master_irq+0x32/0x56 [vuln_msv]
adi_i3c_master_probe+0x5a/0xf47 [vuln_msv]
Initialize the transfer queue and IBI state before requesting and
unmasking the IRQ. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: renesas: Check that the transfer is valid before accessing it
The Renesas I3C driver uses an asynchronous model to transfer data. It
prepares a struct renesas_i3c_xfer, enqueues it, and waits for completion.
The interrupt handler dequeues the transfer, updates/uses it, and signals
the waiting thread.
If the completion times out, the waiting thread dequeues the transfer and
free it. If an interrupt fires after that, the handler may access freed
memory, leading to crashes.
Check that the transfer is still valid before accessing it in the
interrupt handler. With it clear any status flags and disable all
the interrupts to avoid triggering the same interrupts again. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: rtlwifi: rtl8192du: check QoS TID before indexing tids
rtl92du_tx_fill_desc() uses ieee80211_get_tid() to read the QoS TID
from the 802.11 header and then uses it as an index into
sta_entry->tids[]. ieee80211_get_tid() returns the low 4-bit QoS TID
value, so the result can be in the range 0..15.
rtlwifi only allocates MAX_TID_COUNT entries for sta_entry->tids[], and
MAX_TID_COUNT is 9. A QoS TID greater than 8 therefore indexes past the
aggregation state array. Keep the default RTL_AGG_STOP state for
out-of-range TIDs, matching rtl92cu_tx_fill_desc().
This issue was detected by our static analysis tool and confirmed by
manual audit. UBSAN validation for the same bug pattern reports an
array-index-out-of-bounds access with index 10 for type
'rtl_tid_data [9]'. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7925: cancel mlo_pm_work on stop
mt7925 queues mlo_pm_work with a 5 second delay during multi-link
power-save setup and never cancels it on the stop path. If the device is
torn down inside that window, the work outlives the teardown and its timer
fires afterwards, trying to queue onto the workqueue that is already gone:
workqueue: cannot queue mt7925_mlo_pm_work [mt7925_common] on wq phy0
WARNING: kernel/workqueue.c:2283 at __queue_work+0x59/0xa0, CPU#1: swapper/1/0
call_timer_fn+0x2a/0x140
__run_timers+0x203/0x330
run_timer_softirq+0x86/0xf0
mt7921 already has its own stop callback, so add one for mt7925 that
cancels the work before calling mt792x_stop(). mt7925_ops backs both the
PCIe and USB drivers, so this covers both. |
| In the Linux kernel, the following vulnerability has been resolved:
sysctl: move the "cad_pid" entry from pid_table[] to kern_reboot_table[]
cad_pid is global, and kill_cad_pid() is only used in the root namespace.
However, due to pid_table_root_permissions(), a non-root user can unshare
pid/user namespaces and modify it from the child namespace. This makes no
sense and is simply wrong.
Move it to kern_reboot_table[] where it logically belongs; this ensures
that only GLOBAL_ROOT_UID can read/modify this sysctl.
Note that this patch doesn't preserve "#ifdef CONFIG_PROC_SYSCTL" around
the "cad_pid"; CONFIG_PROC_SYSCTL selects CONFIG_SYSCTL, so it is always
set when kern_reboot_table[] is compiled. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: corsair-void: Check size of status and firmware events before reading them
Malformed status and firmware events could cause an out-of-bounds read since
the size wasn't being checked. Check the size and warn on unexpected values to
avoid this. |
| In the Linux kernel, the following vulnerability has been resolved:
debugfs: Fix lockdown check for mmap_prepare
Commit 651fdda8406d ("relay: update relay to use mmap_prepare")
changed the `mmap` file operation to `mmap_prepare` for relayfs, but
the lockdown check in debugfs was not updated accordingly.
This prevents debugfs from being locked down when the kernel is in
integrity mode if a file uses `mmap_prepare` but not `mmap`.
Since the conversion to `mmap_prepare` across the kernel is not yet
complete, update the lockdown check to look for both `mmap` and
`mmap_prepare` to ensure comprehensive coverage. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: fnic: Use GFP_ATOMIC for VLAN alloc under spinlock
fnic_fcoe_process_vlan_resp() allocates a VLAN descriptor with
kzalloc_obj() (default GFP_KERNEL) while holding vlans_lock via
spin_lock_irqsave(). GFP_KERNEL may sleep, which is not allowed in this
atomic context and can trigger a sleeping-from-invalid-context warning
or deadlock.
Pass GFP_ATOMIC so the allocation is safe under the IRQ-safe spinlock. |
| In the Linux kernel, the following vulnerability has been resolved:
zram: validate deflate params
We must validate user-supplied deflate winbits before we pass it to
zlib_deflate_workspacesize(), which triggers BUG_ON() if winbits value is
outside of valid ranges. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: arm64: GICv2: Don't WARN on out-of-range GICV_DIR INTID
vgic_v2_deactivate() passes the INTID a guest wrote to GICV_DIR straight
to vgic_get_vcpu_irq(), and treats a failed lookup as a "can't happen"
condition with WARN_ON_ONCE().
The guest can make it happen at will, though: for any INTID outside of
the implemented SGI, PPI and SPI ranges the lookup returns NULL, since
GICv2 has no LPIs. A guest running with EOImode==1 writing such an INTID
to GICV_DIR triggers the WARN, and panics hosts running with
panic_on_warn.
Drop the WARN and ignore failed lookups. |
| In the Linux kernel, the following vulnerability has been resolved:
module: validate string table section types
In elf_validity_cache_sechdrs, section sizes and offsets are validated,
unless the section type is SHT_NULL or SHT_NOBITS.
Later, elf_validity_cache_secstrings and elf_validity_cache_index_str
access the section name table (.shstrtab) and symbol string table
(.strtab) headers without first ensuring that their types are
SHT_STRTAB. If a section type is SHT_NULL or SHT_NOBITS, sh_offset has
not been validated and may reference out-of-bounds memory when
dereferenced in elf_validity_cache_secstrings or
elf_validity_cache_strtab.
Validate that both string section headers are of type SHT_STRTAB before
caching them. |
| In the Linux kernel, the following vulnerability has been resolved:
NFS/localio: fix ref leak on nfs_uuid_add_file failure
When nfs_uuid_add_file() races with nfs_uuid_put() tearing down
uuid->net, it returns -ENXIO without publishing nfl->nfs_uuid via
rcu_assign_pointer(). nfs_open_local_fh() then enters its error
branch and only releases the slot's file ref and its paired net
ref plus its own entry-time net ref, while the close path is a
no-op:
nfs_close_local_fh()
nfs_uuid = rcu_dereference(nfl->nfs_uuid);
if (!nfs_uuid) { rcu_read_unlock(); return; } /* always */
nfsd_open_local_fh() returns localio holding a caller-owned +1
nfsd_file reference (from nfsd_file_get() after
nfsd_file_acquire_local()) and an entry-time nfsd_net reference
(from its first nfsd_net_try_get()) embedded as nf->nf_net. Both
are leaked on the failure path, pinning one nfsd_file (and the
underlying struct file, dentry, inode) and one nfsd_net_ref per
occurrence, which blocks nfsd_net and netns teardown.
Fix by releasing the caller-owned file ref and its net ref through
the existing helper, using a stack-local RCU pointer so the helper
can xchg it out, then returning -ENXIO so callers do not
dereference a localio whose slot has been cleared:
struct nfsd_file __rcu *tmp = RCU_INITIALIZER(localio);
nfs_to_nfsd_file_put_local(pnf);
nfs_to_nfsd_file_put_local(&tmp);
localio = ERR_PTR(-ENXIO);
The trailing nfs_to_nfsd_net_put(net) continues to release the
outer net ref, so all three nfsd_net_try_get() increments are
balanced on the error branch. |
| In the Linux kernel, the following vulnerability has been resolved:
iomap: don't free integrity payload that doesn't exist
fs_bio_integrity_alloc might not allocate a bio integrity payload if PI
verification is disabled on the block device. Check for that case before
calling fs_bio_integrity_free in iomap_bio_read_folio_range_sync to
avoid a NULL pointer dereferences.
Make the branch cover the PI verification as well - while
fs_bio_integrity_verify works without an integrity payload, it requires
one to actually do useful work. |
| In the Linux kernel, the following vulnerability has been resolved:
i3c: renesas: Fix out-of-bounds access for newdevs mask
When software initiates DAA (Dynamic Address Assignment), the controller
reports the result via the NRSPQP (Normal Response Queue Port Register).
The data length field of the response descriptor, which is accessible
through the NRSPQP register, indicates the number of devices remaining
after DAA. Consequently, when the bus is empty, this field contains the
maximum number of devices supported by the controller (8 for the Renesas
I3C controller).
Adjust the condition that computes the newly discovered devices bitmask
to prevent an out-of-bounds when the I3C bus is empty. |
| In the Linux kernel, the following vulnerability has been resolved:
usb: gadget: uvc: Fix null pointer dereference in uvcg_video_init()
In uvcg_video_init(), if kthread_run_worker() fails,
the error logged uses uvcg_err(), however, the pointer it uses:
video->uvc is not assigned at this point, triggering a null
pointer dereference. Fix this by directly using uvc->func which
is assigned already. |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-tcp: Do not WARN on remotely-controlled oversized SGL allocations
When fuzzing the nvme target code, I tripped a kernel warning in
nvmet_tcp_map_data() because the length passed into the allocator is
controlled by the remote initiator.
A remote initiator that sends a command with an SGL claiming a huge
number, can create a scatterlist and iovec allocation of over 1 million
entries, which causes the backing kmalloc call to exceed MAX_PAGE_ORDER
and then the page allocator will trip on a WARN_ON_ONCE_GFP() message:
WARNING: mm/page_alloc.c:5280 __alloc_frozen_pages_noprof
Workqueue: nvmet_tcp_wq nvmet_tcp_io_work
...
sgl_alloc_order
nvmet_tcp_map_data
nvmet_tcp_try_recv_pdu
As it's never good to trip a kernel warning remotely due to many systems
having panic-on-warn enabled, let's silence it by just add GFP_NOWARN to
the allocation flags. |
