| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hns3: fix kernel crash when 1588 is sent on HIP08 devices
Currently, HIP08 devices does not register the ptp devices, so the
hdev->ptp is NULL. But the tx process would still try to set hardware time
stamp info with SKBTX_HW_TSTAMP flag and cause a kernel crash.
[ 128.087798] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000018
...
[ 128.280251] pc : hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.286600] lr : hclge_ptp_set_tx_info+0x20/0x140 [hclge]
[ 128.292938] sp : ffff800059b93140
[ 128.297200] x29: ffff800059b93140 x28: 0000000000003280
[ 128.303455] x27: ffff800020d48280 x26: ffff0cb9dc814080
[ 128.309715] x25: ffff0cb9cde93fa0 x24: 0000000000000001
[ 128.315969] x23: 0000000000000000 x22: 0000000000000194
[ 128.322219] x21: ffff0cd94f986000 x20: 0000000000000000
[ 128.328462] x19: ffff0cb9d2a166c0 x18: 0000000000000000
[ 128.334698] x17: 0000000000000000 x16: ffffcf1fc523ed24
[ 128.340934] x15: 0000ffffd530a518 x14: 0000000000000000
[ 128.347162] x13: ffff0cd6bdb31310 x12: 0000000000000368
[ 128.353388] x11: ffff0cb9cfbc7070 x10: ffff2cf55dd11e02
[ 128.359606] x9 : ffffcf1f85a212b4 x8 : ffff0cd7cf27dab0
[ 128.365831] x7 : 0000000000000a20 x6 : ffff0cd7cf27d000
[ 128.372040] x5 : 0000000000000000 x4 : 000000000000ffff
[ 128.378243] x3 : 0000000000000400 x2 : ffffcf1f85a21294
[ 128.384437] x1 : ffff0cb9db520080 x0 : ffff0cb9db500080
[ 128.390626] Call trace:
[ 128.393964] hclge_ptp_set_tx_info+0x2c/0x140 [hclge]
[ 128.399893] hns3_nic_net_xmit+0x39c/0x4c4 [hns3]
[ 128.405468] xmit_one.constprop.0+0xc4/0x200
[ 128.410600] dev_hard_start_xmit+0x54/0xf0
[ 128.415556] sch_direct_xmit+0xe8/0x634
[ 128.420246] __dev_queue_xmit+0x224/0xc70
[ 128.425101] dev_queue_xmit+0x1c/0x40
[ 128.429608] ovs_vport_send+0xac/0x1a0 [openvswitch]
[ 128.435409] do_output+0x60/0x17c [openvswitch]
[ 128.440770] do_execute_actions+0x898/0x8c4 [openvswitch]
[ 128.446993] ovs_execute_actions+0x64/0xf0 [openvswitch]
[ 128.453129] ovs_dp_process_packet+0xa0/0x224 [openvswitch]
[ 128.459530] ovs_vport_receive+0x7c/0xfc [openvswitch]
[ 128.465497] internal_dev_xmit+0x34/0xb0 [openvswitch]
[ 128.471460] xmit_one.constprop.0+0xc4/0x200
[ 128.476561] dev_hard_start_xmit+0x54/0xf0
[ 128.481489] __dev_queue_xmit+0x968/0xc70
[ 128.486330] dev_queue_xmit+0x1c/0x40
[ 128.490856] ip_finish_output2+0x250/0x570
[ 128.495810] __ip_finish_output+0x170/0x1e0
[ 128.500832] ip_finish_output+0x3c/0xf0
[ 128.505504] ip_output+0xbc/0x160
[ 128.509654] ip_send_skb+0x58/0xd4
[ 128.513892] udp_send_skb+0x12c/0x354
[ 128.518387] udp_sendmsg+0x7a8/0x9c0
[ 128.522793] inet_sendmsg+0x4c/0x8c
[ 128.527116] __sock_sendmsg+0x48/0x80
[ 128.531609] __sys_sendto+0x124/0x164
[ 128.536099] __arm64_sys_sendto+0x30/0x5c
[ 128.540935] invoke_syscall+0x50/0x130
[ 128.545508] el0_svc_common.constprop.0+0x10c/0x124
[ 128.551205] do_el0_svc+0x34/0xdc
[ 128.555347] el0_svc+0x20/0x30
[ 128.559227] el0_sync_handler+0xb8/0xc0
[ 128.563883] el0_sync+0x160/0x180 |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: fix RCU stall while reaping monitor destination ring
While processing the monitor destination ring, MSDUs are reaped from the
link descriptor based on the corresponding buf_id.
However, sometimes the driver cannot obtain a valid buffer corresponding
to the buf_id received from the hardware. This causes an infinite loop
in the destination processing, resulting in a kernel crash.
kernel log:
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
ath11k_pci 0000:58:00.0: data msdu_pop: invalid buf_id 309
ath11k_pci 0000:58:00.0: data dp_rx_monitor_link_desc_return failed
Fix this by skipping the problematic buf_id and reaping the next entry,
replacing the break with the next MSDU processing.
Tested-on: WCN6855 hw2.0 PCI WLAN.HSP.1.1-03125-QCAHSPSWPL_V1_V2_SILICONZ_LITE-3.6510.30
Tested-on: QCN9074 hw1.0 PCI WLAN.HK.2.7.0.1-01744-QCAHKSWPL_SILICONZ-1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: must allocate more bytes for RedBox support
Blamed commit forgot to change hsr_init_skb() to allocate
larger skb for RedBox case.
Indeed, send_hsr_supervision_frame() will add
two additional components (struct hsr_sup_tlv
and struct hsr_sup_payload)
syzbot reported the following crash:
skbuff: skb_over_panic: text:ffffffff8afd4b0a len:34 put:6 head:ffff88802ad29e00 data:ffff88802ad29f22 tail:0x144 end:0x140 dev:gretap0
------------[ cut here ]------------
kernel BUG at net/core/skbuff.c:206 !
Oops: invalid opcode: 0000 [#1] PREEMPT SMP KASAN NOPTI
CPU: 2 UID: 0 PID: 7611 Comm: syz-executor Not tainted 6.12.0-syzkaller #0
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2~bpo12+1 04/01/2014
RIP: 0010:skb_panic+0x157/0x1d0 net/core/skbuff.c:206
Code: b6 04 01 84 c0 74 04 3c 03 7e 21 8b 4b 70 41 56 45 89 e8 48 c7 c7 a0 7d 9b 8c 41 57 56 48 89 ee 52 4c 89 e2 e8 9a 76 79 f8 90 <0f> 0b 4c 89 4c 24 10 48 89 54 24 08 48 89 34 24 e8 94 76 fb f8 4c
RSP: 0018:ffffc90000858ab8 EFLAGS: 00010282
RAX: 0000000000000087 RBX: ffff8880598c08c0 RCX: ffffffff816d3e69
RDX: 0000000000000000 RSI: ffffffff816de786 RDI: 0000000000000005
RBP: ffffffff8c9b91c0 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000302 R11: ffffffff961cc1d0 R12: ffffffff8afd4b0a
R13: 0000000000000006 R14: ffff88804b938130 R15: 0000000000000140
FS: 000055558a3d6500(0000) GS:ffff88806a800000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f1295974ff8 CR3: 000000002ab6e000 CR4: 0000000000352ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<IRQ>
skb_over_panic net/core/skbuff.c:211 [inline]
skb_put+0x174/0x1b0 net/core/skbuff.c:2617
send_hsr_supervision_frame+0x6fa/0x9e0 net/hsr/hsr_device.c:342
hsr_proxy_announce+0x1a3/0x4a0 net/hsr/hsr_device.c:436
call_timer_fn+0x1a0/0x610 kernel/time/timer.c:1794
expire_timers kernel/time/timer.c:1845 [inline]
__run_timers+0x6e8/0x930 kernel/time/timer.c:2419
__run_timer_base kernel/time/timer.c:2430 [inline]
__run_timer_base kernel/time/timer.c:2423 [inline]
run_timer_base+0x111/0x190 kernel/time/timer.c:2439
run_timer_softirq+0x1a/0x40 kernel/time/timer.c:2449
handle_softirqs+0x213/0x8f0 kernel/softirq.c:554
__do_softirq kernel/softirq.c:588 [inline]
invoke_softirq kernel/softirq.c:428 [inline]
__irq_exit_rcu kernel/softirq.c:637 [inline]
irq_exit_rcu+0xbb/0x120 kernel/softirq.c:649
instr_sysvec_apic_timer_interrupt arch/x86/kernel/apic/apic.c:1049 [inline]
sysvec_apic_timer_interrupt+0xa4/0xc0 arch/x86/kernel/apic/apic.c:1049
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
fs/ntfs3: Mark inode as bad as soon as error detected in mi_enum_attr()
Extended the `mi_enum_attr()` function interface with an additional
parameter, `struct ntfs_inode *ni`, to allow marking the inode
as bad as soon as an error is detected. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_conn: Fix UAF in hci_enhanced_setup_sync
This checks if the ACL connection remains valid as it could be destroyed
while hci_enhanced_setup_sync is pending on cmd_sync leading to the
following trace:
BUG: KASAN: slab-use-after-free in hci_enhanced_setup_sync+0x91b/0xa60
Read of size 1 at addr ffff888002328ffd by task kworker/u5:2/37
CPU: 0 UID: 0 PID: 37 Comm: kworker/u5:2 Not tainted 6.11.0-rc6-01300-g810be445d8d6 #7099
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-2.fc40 04/01/2014
Workqueue: hci0 hci_cmd_sync_work
Call Trace:
<TASK>
dump_stack_lvl+0x5d/0x80
? hci_enhanced_setup_sync+0x91b/0xa60
print_report+0x152/0x4c0
? hci_enhanced_setup_sync+0x91b/0xa60
? __virt_addr_valid+0x1fa/0x420
? hci_enhanced_setup_sync+0x91b/0xa60
kasan_report+0xda/0x1b0
? hci_enhanced_setup_sync+0x91b/0xa60
hci_enhanced_setup_sync+0x91b/0xa60
? __pfx_hci_enhanced_setup_sync+0x10/0x10
? __pfx___mutex_lock+0x10/0x10
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
? __pfx_lock_acquire+0x10/0x10
? __pfx_process_one_work+0x10/0x10
? assign_work+0x167/0x240
worker_thread+0x5b7/0xf60
? __kthread_parkme+0xac/0x1c0
? __pfx_worker_thread+0x10/0x10
? __pfx_worker_thread+0x10/0x10
kthread+0x293/0x360
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2f/0x70
? __pfx_kthread+0x10/0x10
ret_from_fork_asm+0x1a/0x30
</TASK>
Allocated by task 34:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
__kasan_kmalloc+0x8f/0xa0
__hci_conn_add+0x187/0x17d0
hci_connect_sco+0x2e1/0xb90
sco_sock_connect+0x2a2/0xb80
__sys_connect+0x227/0x2a0
__x64_sys_connect+0x6d/0xb0
do_syscall_64+0x71/0x140
entry_SYSCALL_64_after_hwframe+0x76/0x7e
Freed by task 37:
kasan_save_stack+0x30/0x50
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x101/0x160
kfree+0xd0/0x250
device_release+0x9a/0x210
kobject_put+0x151/0x280
hci_conn_del+0x448/0xbf0
hci_abort_conn_sync+0x46f/0x980
hci_cmd_sync_work+0x1c2/0x330
process_one_work+0x7d9/0x1360
worker_thread+0x5b7/0xf60
kthread+0x293/0x360
ret_from_fork+0x2f/0x70
ret_from_fork_asm+0x1a/0x30 |
| In the Linux kernel, the following vulnerability has been resolved:
x86/mm/ident_map: Use gbpages only where full GB page should be mapped.
When ident_pud_init() uses only GB pages to create identity maps, large
ranges of addresses not actually requested can be included in the resulting
table; a 4K request will map a full GB. This can include a lot of extra
address space past that requested, including areas marked reserved by the
BIOS. That allows processor speculation into reserved regions, that on UV
systems can cause system halts.
Only use GB pages when map creation requests include the full GB page of
space. Fall back to using smaller 2M pages when only portions of a GB page
are included in the request.
No attempt is made to coalesce mapping requests. If a request requires a
map entry at the 2M (pmd) level, subsequent mapping requests within the
same 1G region will also be at the pmd level, even if adjacent or
overlapping such requests could have been combined to map a full GB page.
Existing usage starts with larger regions and then adds smaller regions, so
this should not have any great consequence. |
| In the Linux kernel, the following vulnerability has been resolved:
ax25: fix use-after-free bugs caused by ax25_ds_del_timer
When the ax25 device is detaching, the ax25_dev_device_down()
calls ax25_ds_del_timer() to cleanup the slave_timer. When
the timer handler is running, the ax25_ds_del_timer() that
calls del_timer() in it will return directly. As a result,
the use-after-free bugs could happen, one of the scenarios
is shown below:
(Thread 1) | (Thread 2)
| ax25_ds_timeout()
ax25_dev_device_down() |
ax25_ds_del_timer() |
del_timer() |
ax25_dev_put() //FREE |
| ax25_dev-> //USE
In order to mitigate bugs, when the device is detaching, use
timer_shutdown_sync() to stop the timer. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: fix potential panic dues to unprotected smc_llc_srv_add_link()
There is a certain chance to trigger the following panic:
PID: 5900 TASK: ffff88c1c8af4100 CPU: 1 COMMAND: "kworker/1:48"
#0 [ffff9456c1cc79a0] machine_kexec at ffffffff870665b7
#1 [ffff9456c1cc79f0] __crash_kexec at ffffffff871b4c7a
#2 [ffff9456c1cc7ab0] crash_kexec at ffffffff871b5b60
#3 [ffff9456c1cc7ac0] oops_end at ffffffff87026ce7
#4 [ffff9456c1cc7ae0] page_fault_oops at ffffffff87075715
#5 [ffff9456c1cc7b58] exc_page_fault at ffffffff87ad0654
#6 [ffff9456c1cc7b80] asm_exc_page_fault at ffffffff87c00b62
[exception RIP: ib_alloc_mr+19]
RIP: ffffffffc0c9cce3 RSP: ffff9456c1cc7c38 RFLAGS: 00010202
RAX: 0000000000000000 RBX: 0000000000000002 RCX: 0000000000000004
RDX: 0000000000000010 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffff88c1ea281d00 R8: 000000020a34ffff R9: ffff88c1350bbb20
R10: 0000000000000000 R11: 0000000000000001 R12: 0000000000000000
R13: 0000000000000010 R14: ffff88c1ab040a50 R15: ffff88c1ea281d00
ORIG_RAX: ffffffffffffffff CS: 0010 SS: 0018
#7 [ffff9456c1cc7c60] smc_ib_get_memory_region at ffffffffc0aff6df [smc]
#8 [ffff9456c1cc7c88] smcr_buf_map_link at ffffffffc0b0278c [smc]
#9 [ffff9456c1cc7ce0] __smc_buf_create at ffffffffc0b03586 [smc]
The reason here is that when the server tries to create a second link,
smc_llc_srv_add_link() has no protection and may add a new link to
link group. This breaks the security environment protected by
llc_conf_mutex. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Guard stack limits against 32bit overflow
This patch promotes the arithmetic around checking stack bounds to be
done in the 64-bit domain, instead of the current 32bit. The arithmetic
implies adding together a 64-bit register with a int offset. The
register was checked to be below 1<<29 when it was variable, but not
when it was fixed. The offset either comes from an instruction (in which
case it is 16 bit), from another register (in which case the caller
checked it to be below 1<<29 [1]), or from the size of an argument to a
kfunc (in which case it can be a u32 [2]). Between the register being
inconsistently checked to be below 1<<29, and the offset being up to an
u32, it appears that we were open to overflowing the `int`s which were
currently used for arithmetic.
[1] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf/verifier.c#L7494-L7498
[2] https://github.com/torvalds/linux/blob/815fb87b753055df2d9e50f6cd80eb10235fe3e9/kernel/bpf/verifier.c#L11904 |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: qla2xxx: Fix memory leak in __qlt_24xx_handle_abts()
Commit 8f394da36a36 ("scsi: qla2xxx: Drop TARGET_SCF_LOOKUP_LUN_FROM_TAG")
made the __qlt_24xx_handle_abts() function return early if
tcm_qla2xxx_find_cmd_by_tag() didn't find a command, but it missed to clean
up the allocated memory for the management command. |
| In the Linux kernel, the following vulnerability has been resolved:
ring-buffer: Fix subbuf resize race with ring buffer readers
trace_buffer subbuf_size is read lockless in ring_buffer_read_page() and
ring_buffer_read_start(), while it can simultaneously be resized with
ring_buffer_subbuf_order_set().
Instead of trace_buffer::subbuf_size, use bpage::order in
ring_buffer_read_start() and ring_buffer_read_page().
In ring_buffer_read_start(), even with resize_disabled, there is still a
possibility of a race with a buffer modification. Hold the trace_buffer
mutex to synchronise with any pending ring buffer order modification.
trace_buffer::subbuf_size is now actually useless, remove it. Also,
create accessors rb_subbuf_capacity() and rb_page_capacity() which
return the actual size available for storing events, while
rb_subbuf_size() returns the actual subbuf page-size. |
| In the Linux kernel, the following vulnerability has been resolved:
clocksource/drivers/nxp-pit: Fix IRQ leak on cpuhp_setup_state error path
When cpuhp_setup_state fails after pit_clockevent_per_cpu_init has
successfully called request_irq, the error handling jumps directly to
out_pit_clocksource_unregister without freeing the registered IRQ.
This leaks the IRQ line and, since kfree(pit) follows, leaves a
dangling pointer registered as the interrupt handler's dev_id,
potentially leading to a use-after-free if the IRQ fires afterwards.
Fix it by calling pit_clockevent_per_cpu_exit to properly release the
IRQ before falling through to the existing cleanup chain. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix double end_creating() on the casefold-mismatch path
ovl_create_real() releases the new dentry twice when the casefold
consistency check fails. The S_IFDIR branch calls end_creating() and
sets err, then falls through to the common out: label which calls
end_creating() on the same dentry again:
case S_IFDIR:
newdentry = ovl_do_mkdir(ofs, dir, newdentry, attr->mode);
err = PTR_ERR_OR_ZERO(newdentry);
if (!err && ofs->casefold != ovl_dentry_casefolded(newdentry)) {
pr_warn_ratelimited(...);
end_creating(newdentry); /* first */
err = -EINVAL;
}
break;
...
if (err)
goto out;
...
out:
if (err) {
end_creating(newdentry); /* second, same dentry */
return ERR_PTR(err);
}
end_creating() is end_dirop(), which does inode_unlock() on the parent
and dput() on the dentry, so the parent directory's i_rwsem is unlocked
twice and the dentry is put twice. The second unlock releases a lock
that is not held, which is what wedges every later creation under that
parent, and the second dput() drops a reference that was never taken.
The branch was added by commit dfc7da402ccc ("ovl: Check for casefold
consistency when creating new dentries") as a bare dput(), which already
released the reference twice; commit fe497f0759e0 ("VFS: change
vfs_mkdir() to unlock on failure.") converted both sites to
end_creating(), adding the double unlock.
This is reachable by an unprivileged user. The casefold consistency of
the layers is validated at mount time in ovl_parse_layer(), and again on
every lookup in ovl_lookup_single(), but ofs->workdir is the internal
"work" subdirectory created inside the user-supplied workdir, and that
subdirectory is not re-checked. Marking it casefolded after the mount
therefore makes every ovl_create_temp() inherit the wrong state - and
that path reaches ovl_create_real() through ovl_start_creating_temp(),
which uses start_creating() with a generated name and so never runs the
lookup-time check.
unshare -Urm
mount -t tmpfs -o casefold=utf8-12.1.0 tmpfs mnt
mkdir -p mnt/lower/d mnt/upper mnt/work mnt/merged
mount -t overlay ovl -o lowerdir=mnt/lower,\
upperdir=mnt/upper,workdir=mnt/work mnt/merged
chattr +F mnt/work/work
mkdir mnt/merged/d/sub # directory copy-up
overlayfs: wrong inherited casefold (work/#5)
and the next copy-up blocks forever on the parent's i_rwsem:
mkdir D start_creating+0x65/0xb0
ovl_start_creating_temp+0xb0/0xe0 [overlay]
ovl_create_temp+0xa3/0x1d0 [overlay]
ovl_copy_up_one+0x1f1c/0x21c0 [overlay]
ovl_copy_up_flags+0xf5/0x140 [overlay]
ovl_create_object+0xb7/0x220 [overlay]
ovl_mkdir+0x23/0x40 [overlay]
Drop the end_creating() from the branch and let out: own the cleanup,
which is what every other error path in this function already does. |
| In the Linux kernel, the following vulnerability has been resolved:
mm, swap: don't free a hibernation slot that is in the swap cache
A slot with a folio in the swap cache is freed when the folio leaves the
cache, not when its count drops. swap_put_entries_cluster() follows that
rule. swap_free_hibernation_slot() does not, it calls
__swap_cluster_free_entries() whether or not a folio sits on the slot.
Cluster readahead can put one there. It walks a raw page_cluster sized
window of offsets around the faulting entry, and a hibernation slot passes
__swap_cache_add_check() because it is not a folio and its count is not
zero. Freeing the slot then clears the entry under that folio.
The folio is now unreachable from the swap table, and the offset goes back
to the allocator. The folio is still on the LRU though, so reclaim can
pick it up later. It then takes the old offset out of folio->swap and
overwrites the table entry there, which by then may belong to someone
else.
This bug can trigger silent memory corruption, process crashes, or data
instability across completely unrelated userspace applications - typically
occurring when uswsusp is preparing the hibernation image.
I found this while working on giving hibernation slots their own marker in
the swap table, which I had discussed with Kairui.
(https://lore.kernel.org/linux-mm/abp7aDgYLrxF3Me8@KASONG-MC4/) As far as
I know there are no reports, so there is no Reported-by/Closes to add.
Check for a cached folio before freeing. The slot is then left in the
ordinary state where only the swap cache holds it, and it is freed when
the folio leaves the cache, either through the reclaim below or through
normal reclaim later. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/mempolicy: skip non-present PMDs when queueing folios
Patch series "mm: handle device-private PMDs in walk callbacks", v3.
Since commit 368076f52ebe ("mm/huge_memory: add device-private THP support
to PMD operations") a PMD may hold a device-private swap entry whenever an
HMM-based GPU driver migrates an anonymous THP folio to device memory via
migrate_vma_pages().
pmd_trans_huge_lock() succeeds for such PMDs (pmd_is_huge() returns true
for any non-present, non-none huge PMD), so several MM walk callbacks that
used to assume present THP or migration entry are now reachable with a
device-private PMD. The results range from a VM_BUG_ON() firing on debug
kernels, to an oops on a bogus vmemmap dereference, to silently isolating
an unrelated live folio from LRU in the aliasing case.
This patch (of 3):
queue_folios_pmd() is called under pmd_trans_huge_lock(), whose
pmd_is_huge() check returns true for any non-present, non-none PMD
softleaf. Passing such a PMD to pmd_folio() treats the softleaf encoding
as a hardware PFN and can return a bogus folio pointer.
Mirror queue_folios_pte_range(): handle non-present entries before looking
up a folio. Keep migration entries counted as failures, but skip other
non-present PMDs such as device-private entries.
Potential trigger: an HMM-based GPU driver migrates an anonymous THP folio
to device memory via migrate_vma_pages(), leaving a device-private PMD.
Userspace then calls mbind(), migrate_pages() or set_mempolicy_home_node()
on that range. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/pagewalk: fix stale walk->action escaping walk_pmd_range()
If ->pmd_entry() sets walk->action = ACTION_AGAIN, the pmd_none() check is
retried. The PMD entry may be cleared at the point of retry.
In this case, if walk->ops->install_pte is not specified, the code
continues to the next PMD entry in the range without resetting
walk->action to ACTION_SUBTREE.
This leaves walk->action erroneously set to ACTION_AGAIN, which is
incorrect.
This was incorrect but not problematic up until commit 3b89863c3fa4
("mm/pagewalk: fix race between concurrent split and refault") which
updated walk_pud_range() to check for walk->action == ACTION_AGAIN upon
walk_pmd_range()'s return, causing the PUD walk to be retried.
In this case this results in duplicate walk callbacks being invoked,
which is erroneous and will break any caller that is not idempotent
with respect to this (and waste time for those which are). The result
is an out-of-bounds write, triggered by a local fuzzer:
[ 2.272695] ==================================================================
[ 2.273471] BUG: KASAN: slab-out-of-bounds in __mincore_unmapped_range+0x14f/0x190
[ 2.274302] Write of size 1 at addr ffff888008d9b000 by task poc/106
[ 2.274966]
[ 2.275154] CPU: 0 UID: 1000 PID: 106 Comm: poc Not tainted 7.2.0-rc6-00429-ga7c7074b58d2 #55 PREEMPT(lazy)
[ 2.275159] Hardware name: QEMU Ubuntu 24.04 PC v2 (i440FX + PIIX, arch_caps fix, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
[ 2.275164] Call Trace:
[ 2.275170] <TASK>
[ 2.275172] dump_stack_lvl+0x53/0x70
[ 2.275200] print_report+0xd0/0x630
[ 2.275210] ? __pfx__raw_spin_lock_irqsave+0x10/0x10
[ 2.275219] ? irqentry_exit+0xd2/0x670
[ 2.275224] ? irqentry_exit+0xd2/0x670
[ 2.275226] ? __virt_addr_valid+0xef/0x1a0
[ 2.275239] ? __mincore_unmapped_range+0x14f/0x190
[ 2.275242] kasan_report+0xce/0x100
[ 2.275245] ? __mincore_unmapped_range+0x14f/0x190
[ 2.275248] __mincore_unmapped_range+0x14f/0x190
[ 2.275252] mincore_unmapped_range+0x45/0x70
[ 2.275254] walk_pgd_range+0xafc/0xfc0
[ 2.275261] ? __pfx_walk_pgd_range+0x10/0x10
[ 2.275264] ? __update_load_avg_se+0x3d1/0x670
[ 2.275275] __walk_page_range+0xc0/0x310
[ 2.275278] ? __pfx_find_vma+0x10/0x10
[ 2.275281] ? finish_task_switch.isra.0+0x16d/0x4f0
[ 2.275290] walk_page_range_mm_unsafe+0x26f/0x3a0
[ 2.275293] ? __pfx_mtree_load+0x10/0x10
[ 2.275298] ? __pfx_walk_page_range_mm_unsafe+0x10/0x10
[ 2.275302] ? __free_frozen_pages+0x54d/0x7e0
[ 2.275308] __do_sys_mincore+0x132/0x380
[ 2.275311] do_syscall_64+0xf9/0x540
[ 2.275316] entry_SYSCALL_64_after_hwframe+0x77/0x7f
[ 2.275322] RIP: 0033:0x422ccd
[ 2.275326] Code: b3 66 2e 0f 1f 84 00 00 00 00 00 66 90 f3 0f 1e fa 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48
[ 2.275329] RSP: 002b:00007fffffffec18 EFLAGS: 00000287 ORIG_RAX: 000000000000001b
[ 2.275337] RAX: ffffffffffffffda RBX: 0000000000000066 RCX: 0000000000422ccd
[ 2.275339] RDX: 00000000004d0940 RSI: 0000000001000000 RDI: 00007ffff4000000
[ 2.275340] RBP: 00000000004d0940 R08: 0000000000000100 R09: 0000000000000100
[ 2.275342] R10: 0000000000000100 R11: 0000000000000287 R12: 20c49ba5e353f7cf
[ 2.275343] R13: 00000000004990d3 R14: 0000000000000000 R15: 0000000000000001
[ 2.275346] </TASK>
[ 2.275347]
[ 2.296904] The buggy address belongs to the object at ffff888008d9b000
[ 2.296904] which belongs to the cache sigqueue of size 80
[ 2.298151] The buggy address is located 0 bytes inside of
[ 2.298151] allocated 80-byte region [ffff888008d9b000, ffff888008d9b050)
[ 2.299408]
[ 2.299601] The buggy address belongs to the physical page:
[ 2.300191] page: refcount:0 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x8d9b
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix retry exhaustion in simple ring buffer reader swap
simple_ring_buffer_swap_reader_page() starts with retry set to 8 and
post-decrements it only after a failed link replacement. On the final
attempt, a successful replacement leaves retry at zero, while a failed
replacement leaves it at -1.
The current !retry test reverses both outcomes. It returns an error after
a successful final replacement, leaving the link update complete but the
reader bookkeeping unfinished. After a failed final replacement, it
falls through and updates the head and reader pointers as though the
replacement succeeded, which can corrupt the ring.
Treat only a negative counter as exhaustion and return the documented
-EBUSY error. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix use-after-free in trace_pipe read on sub-buffer order change
Writing to buffer_subbuf_size_kb calls ring_buffer_subbuf_order_set(),
which frees every sub-buffer of the ring buffer, including the reader
page, and replaces them with newly allocated ones.
Readers of trace_pipe hold pointers into those pages. ring_buffer_peek()
looks up an event under cpu_buffer->reader_lock but returns the event
pointer after dropping the lock, and peek_next_entry() then calls
ring_buffer_event_length() and ring_buffer_event_data() on it. If the
sub-buffer order is changed in that window, the reader dereferences
freed memory:
BUG: KASAN: use-after-free in ring_buffer_peek+0x3e0/0x430
Read of size 1 at addr ffff88802a4cf010 by task syz-executor989/6002
Freed by:
free_buffer_page kernel/trace/ring_buffer.c:398 [inline]
ring_buffer_subbuf_order_set+0x1325/0x18e0 kernel/trace/ring_buffer.c:7444
buffer_subbuf_size_write+0x182/0x280 kernel/trace/trace.c:8221
Take trace_access_lock(RING_BUFFER_ALL_CPUS) around the order change.
This is the lock trace_pipe readers already hold across their entire
peek-and-print loop, so the swap can no longer race with a reader that
is dereferencing a peeked event. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: bound the device-reported response length
nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported
by the NSM device into msg->resp.len without bounding it to the response
buffer. A malicious or buggy backend can report a length larger than the
response buffer; parse_resp_raw() then copies that many bytes out of the
fixed buffer to user space, disclosing adjacent kernel heap (an
out-of-bounds read). The request path already floors its length in
fill_req_raw(); the response path lacks the symmetric check.
Clamp the stored length to the size of the response buffer. Well-behaved
devices report no more than the posted buffer size, so conforming traffic
is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: set SC_STATUS_FREED in nfsd4_drop_revoked_stid for delegations
nfsd4_drop_revoked_stid() handles FREE_STATEID for admin-revoked
delegations but does not set SC_STATUS_FREED before releasing cl_lock.
revoke_delegation() uses this flag to detect whether FREE_STATEID has
already processed the delegation -- without it, the freed delegation is
added to cl_revoked via list_add(), producing a use-after-free when
cl_revoked is later traversed in __destroy_client().
The SC_STATUS_REVOKED path in nfsd4_free_stateid() (line 7983) already
sets SC_STATUS_FREED correctly. Apply the same pattern to the
SC_STATUS_ADMIN_REVOKED path in nfsd4_drop_revoked_stid(). |
