| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Netskope was notified about a potential gap in Netskope Endpoint DLP (EPDLP) running on Windows systems. Successful exploitation of the gap could potentially allow a privileged user to send a crafted message to the EPDLP process port to trigger an integer overflow, leading to memory corruption. Successful exploitation would require the EPDLP module to be enabled in the client configuration, and that Memory Integrity is disabled. A successful exploit could potentially result in a denial-of-service, arbitrary code execution, or privilege escalation on the local machine. |
| Authentication bypass using an alternate path or channel and Improper validation of syntactic correctness of input vulnerability in Brainzcompany Zenius EMS 8.0 allows Remote Code Inclusion.
This issue affects Zenius EMS 8.0: through OAM (Build 109). |
| libp2p-rendezvous through 0.17.1 fails to validate registration TTL values in discovery responses, allowing attackers to trigger timer arithmetic overflow. A malicious rendezvous server can send a discovery response with an unbounded TTL value that causes the client node process to panic when computing the expiry timer. |
| A flaw was found in `multipathd`. A local attacker with access to the `multipathd` UNIX control socket can exploit this vulnerability by sending valid commands and then ceasing to read replies. This action can cause the `multipathd` listener thread to block, leading to a Denial of Service (DoS) where legitimate Inter-Process Communication (IPC) operations may hang or time out. This issue does not result in privilege escalation, arbitrary code execution, or impact data confidentiality or integrity. |
| Out-of-bounds read vulnerability in Citirx Workspace app for Windows.
This issue affects Workspace app for Windows: before 2603.11 Current Release (CR), before 2507.1 LTSR CU3, and before LTSR 2607. |
| GeoVision GV-LPC2211 V1.13 fails to limit repeated User elements in ONVIF SetUser requests, allowing an authenticated administrator to overwrite stack control state and crash the ONVIF worker. |
| Headroom compresses data before the data reaches a large language model. Prior to version 0.35.0, the Headroom WebSocket server does not validate the `Origin` header of incoming client WebSocket requests before forwarding the request to the upstream server, allowing malicious WebSocket clients to perform arbitrary LLM requests without authentication. This can be exploited by a malicious WebSocket client executed in a traditional or headless browser such as lightpanda, if the browser has access to the Headroom proxy and the OpenAI API key is stored in the `OPENAI_API_KEY` environment variable. Version 0.35.0 fixes the issue. |
| An arbitrary code execution vulnerability in Mistral Vibe allows an attacker to bypass command permission checks using ANSI-C quoted arguments. These arguments are not properly inspected, enabling a crafted allowlisted command to execute arbitrary code on the user's system without approval. |
| An arbitrary code execution vulnerability in Mistral Vibe allows an attacker to bypass command permission checks using environment variable assignments preceding allowlisted commands. These assignments are excluded from inspection, enabling attacker-controlled environment variables to cause arbitrary code execution without user approval. |
| Heap-based buffer overflow in Microsoft Office allows an unauthorized attacker to disclose information over a network. |
| Out-of-bounds read in Microsoft Office Word allows an unauthorized attacker to disclose information over a network. |
| In the Linux kernel, the following vulnerability has been resolved:
ovl: fix double end_creating() on the casefold-mismatch path
ovl_create_real() releases the new dentry twice when the casefold
consistency check fails. The S_IFDIR branch calls end_creating() and
sets err, then falls through to the common out: label which calls
end_creating() on the same dentry again:
case S_IFDIR:
newdentry = ovl_do_mkdir(ofs, dir, newdentry, attr->mode);
err = PTR_ERR_OR_ZERO(newdentry);
if (!err && ofs->casefold != ovl_dentry_casefolded(newdentry)) {
pr_warn_ratelimited(...);
end_creating(newdentry); /* first */
err = -EINVAL;
}
break;
...
if (err)
goto out;
...
out:
if (err) {
end_creating(newdentry); /* second, same dentry */
return ERR_PTR(err);
}
end_creating() is end_dirop(), which does inode_unlock() on the parent
and dput() on the dentry, so the parent directory's i_rwsem is unlocked
twice and the dentry is put twice. The second unlock releases a lock
that is not held, which is what wedges every later creation under that
parent, and the second dput() drops a reference that was never taken.
The branch was added by commit dfc7da402ccc ("ovl: Check for casefold
consistency when creating new dentries") as a bare dput(), which already
released the reference twice; commit fe497f0759e0 ("VFS: change
vfs_mkdir() to unlock on failure.") converted both sites to
end_creating(), adding the double unlock.
This is reachable by an unprivileged user. The casefold consistency of
the layers is validated at mount time in ovl_parse_layer(), and again on
every lookup in ovl_lookup_single(), but ofs->workdir is the internal
"work" subdirectory created inside the user-supplied workdir, and that
subdirectory is not re-checked. Marking it casefolded after the mount
therefore makes every ovl_create_temp() inherit the wrong state - and
that path reaches ovl_create_real() through ovl_start_creating_temp(),
which uses start_creating() with a generated name and so never runs the
lookup-time check.
unshare -Urm
mount -t tmpfs -o casefold=utf8-12.1.0 tmpfs mnt
mkdir -p mnt/lower/d mnt/upper mnt/work mnt/merged
mount -t overlay ovl -o lowerdir=mnt/lower,\
upperdir=mnt/upper,workdir=mnt/work mnt/merged
chattr +F mnt/work/work
mkdir mnt/merged/d/sub # directory copy-up
overlayfs: wrong inherited casefold (work/#5)
and the next copy-up blocks forever on the parent's i_rwsem:
mkdir D start_creating+0x65/0xb0
ovl_start_creating_temp+0xb0/0xe0 [overlay]
ovl_create_temp+0xa3/0x1d0 [overlay]
ovl_copy_up_one+0x1f1c/0x21c0 [overlay]
ovl_copy_up_flags+0xf5/0x140 [overlay]
ovl_create_object+0xb7/0x220 [overlay]
ovl_mkdir+0x23/0x40 [overlay]
Drop the end_creating() from the branch and let out: own the cleanup,
which is what every other error path in this function already does. |
| In the Linux kernel, the following vulnerability has been resolved:
misc: nsm: bound the device-reported response length
nsm_sendrecv_msg_locked() stores the virtqueue used-ring length reported
by the NSM device into msg->resp.len without bounding it to the response
buffer. A malicious or buggy backend can report a length larger than the
response buffer; parse_resp_raw() then copies that many bytes out of the
fixed buffer to user space, disclosing adjacent kernel heap (an
out-of-bounds read). The request path already floors its length in
fill_req_raw(); the response path lacks the symmetric check.
Clamp the stored length to the size of the response buffer. Well-behaved
devices report no more than the posted buffer size, so conforming traffic
is unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: clear opcnt on compound arg release to prevent OOB read
nfsd4_release_compoundargs() resets args->ops to the inline iops[8]
array when the dynamically-allocated ops buffer is freed, but leaves
args->opcnt at its original value (which can be up to 200 for NFSv4.1+
compounds).
If rq_status_counter is stuck at an odd value (which can happen when
nfsd_dispatch() hits an error path after setting it odd), the RPC
status dumpit handler reads min(opcnt, 16) entries from args->ops[].
Since iops only has 8 elements and is the last field in struct
nfsd4_compoundargs, reading indices 8-15 accesses adjacent slab memory
and leaks it to userspace via netlink.
Zero opcnt unconditionally in nfsd4_release_compoundargs() so stale
compound metadata is never exposed through the status interface.
[ cel: Remove the kvfree_rcu_mightsleep() sleep from the exposure window ] |
| In the Linux kernel, the following vulnerability has been resolved:
ceph: bound MDSCapAuth path and fs_name decode in handle_session()
handle_session() decodes the MDSCapAuth records carried by a
CEPH_SESSION_OPEN message (msg_version >= 6). For each record the
match.path and match.fs_name byte strings are read by first decoding a
32-bit length and then copying that many bytes with the bare
ceph_decode_copy(). Unlike the surrounding fields, which all use the
_safe decode variants, these two copies are not preceded by a
ceph_decode_need() bounds check, and the enclosing MDSCapAuth and
MDSCapMatch struct_len fields are skipped rather than enforced as an
upper bound. A length larger than the bytes remaining in the message
front makes ceph_decode_copy() read past the end of the front buffer.
The message front is a dedicated allocation (ceph_msg_new2() ->
kvmalloc), so the over-read runs off that object. A malicious or
compromised MDS can trigger this with the first post-connect message on
mount, with no client-side user interaction; under KASAN it is reported
as a slab-out-of-bounds read in handle_session().
Impact: a malicious MDS can force the kernel client to read up to 4 GiB
past the message front allocation during session setup, crashing the
client (out-of-bounds read).
Switch both copies to ceph_decode_copy_safe(), which performs the
ceph_decode_need() bounds check before the copy and branches to the
existing bad label, matching the rest of the decoder and the error path
that frees the partially decoded cap_auths array. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: restore the data_offset bound in is_valid_oplock_break()
Commit 83bfbd0bb902 ("cifs: Remove the RFC1002 header from smb_hdr")
changed the quantity this bound is measured against. It used to be
srv->total_read minus the 4-byte RFC1002 preamble that total_read then
included, so it was the SMB message length. The same commit stopped
counting the preamble, and the mechanical substitution to
srv->total_read - srv->pdu_size left an expression that is identically
zero: standard_receive3() reads MID_HEADER_SIZE() bytes and then exactly
pdu_length - MID_HEADER_SIZE() more, adding both to total_read.
len is therefore 0, the subtraction below it wraps, and no __u32
DataOffset can exceed the result, so the check from commit 097f5863b1a0
("cifs: read overflow in is_valid_oplock_break()") no longer rejects
anything. Use total_read, which is now the message length on its own. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quickspi: validate report size before copy
write_cmd_to_txdma() builds an output report in qsdev->report_buf, a heap
buffer allocated in quickspi_alloc_report_buf() to the device-descriptor
derived max_report_len (a few hundred bytes for a touch controller). It
copies the caller-supplied report into that buffer:
memcpy(write_buf->content, report_buf, report_buf_len);
The HID core caps a report at HID_MAX_BUFFER_SIZE (16384) by default, and
quickspi_hid_ll_driver does not set max_buffer_size, so the length reaches
the driver unbounded. A hidraw SET_REPORT/SET_FEATURE ioctl carrying a
report larger than max_report_len therefore overflows report_buf with
attacker-controlled length and content.
Record the report_buf allocation size and reject reports that do not fit
before copying, matching the equivalent guard in the intel-quicki2c
sibling (quicki2c_init_write_buf()) and the hid-goodix-spi fix.
write_cmd_to_txdma() writes the output report header ahead of the content
in the same buffer, so size the allocation to cover the header as well.
That keeps the added bound from rejecting a maximum-sized report. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: intel-thc-hid: intel-quickspi: bound GET_REPORT response to the caller buffer
quickspi_hid_raw_request() receives the caller's buffer length in len, but
quickspi_get_report() never sees it and copies the whole device-supplied
response into buf regardless:
memcpy(buf, qsdev->report_buf, qsdev->report_len);
qsdev->report_len comes from the input report the touch controller returns,
while buf is sized to whatever the caller asked hidraw for through
HIDIOCGFEATURE or HIDIOCGINPUT. A response larger than that overflows buf
with device-controlled content.
The intel-quicki2c sibling already passes the caller length down to
quicki2c_get_report() and validates the response against it before the
copy. Do the same here. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: bound the free-cluster bitmap scan to the volume
vol->lcn_empty_bits_per_page is sized from vol->nr_clusters at mount, but
ntfs_cluster_alloc() bounds its scan of that array by the size of $Bitmap.
Those are independent on-disk quantities and the mount-time check only
rejects a $Bitmap that is too small, so an image whose $Bitmap covers more
clusters than the volume has lets the scan index past the array. A run
whose LCN lies in that gap takes the allocator straight there, since the
caller passes the file's own last LCN as its locality hint. KASAN reports
a slab out-of-bounds read when a file on such a volume is extended.
Clamp the scan to what that array covers, mirroring the max_index
calculation the mount-time scan already uses, and reject a decoded LCN
at or beyond nr_clusters in the mapping pairs decoder. Conforming
volumes are unaffected. |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: reject invalid empty mapping pairs
Reject an attribute with empty mapping pairs if it has inconsistent
highest VCN and size. |
