Export limit exceeded: 409355 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (25283 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-80595 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - add response length checks The driver processes response data from device buffers without verifying that the device actually sent enough data. This can lead to out-of-bounds reads or processing stale data. Add checks for the expected response length before accessing the buffers. | ||||
| CVE-2026-80651 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: crypto: ccp/sev-dev-tsm - bail out early when pdev->bus is NULL dsm_create() initially checks pdev->bus when computing segment_id: u8 segment_id = pdev->bus ? pci_domain_nr(pdev->bus) : 0; But the next two lines unconditionally dereference pdev->bus via pcie_find_root_port() and especially pci_dev_id(pdev), which expands to PCI_DEVID(dev->bus->number, dev->devfn). If pdev->bus is in fact NULL, segment_id is initialised to 0 but the very next statement crashes the kernel. smatch flags this: drivers/crypto/ccp/sev-dev-tsm.c:253 dsm_create() error: we previously assumed 'pdev->bus' could be null (see line 251) Make the NULL handling consistent: if pdev->bus is NULL the device has no PCI context to work with and SEV TIO setup cannot proceed, so return -ENODEV before any of the bus-dependent lookups. The remaining initialisation now runs only on the path where pdev->bus is known to be valid. No change for callers where pdev->bus is non-NULL, which is the only case where dsm_create() did meaningful work before this change. | ||||
| CVE-2026-80657 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Guard management mailbox channel cleanup against NULL pointer The management mailbox channel cleanup helpers can be called from error handling paths when mgmt_chann has already been destroyed. Add NULL checks to xdna_mailbox_free_channel() and xdna_mailbox_stop_channel() so the cleanup path safely returns instead of dereferencing a NULL mailbox channel pointer. | ||||
| CVE-2026-80597 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: maps: vmu-flash: fix NULL pointer dereference in initialization The mtd_info contains a struct device, which must be linked to its parent. Without this, the initialization of the MTD fails with a NULL pointer dereference. | ||||
| CVE-2026-80616 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ieee802154: Avoid calling WARN_ON() on -ENOMEM in cfg802154_switch_netns() It's pointless to call WARN_ON() in case of an allocation failure in dev_change_net_namespace() and device_rename(), since it only leads to useless splats caused by deliberate fault injections, so avoid it. Found by Linux Verification Center (linuxtesting.org) with Syzkaller. | ||||
| CVE-2026-80620 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Revert "PCI/MSI: Unmap MSI-X region on error" This reverts commit 1a8d4c6ecb4c81261bcdf13556abd4a958eca202. Commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") added an iounmap(dev->msix_base) on the error path of msix_capability_init() to release the MSI-X region when msix_setup_interrupts() fails. When msix_setup_interrupts() fails, the call chain is: msix_setup_interrupts() -> __msix_setup_interrupts() struct pci_dev *dev __free(free_msi_irqs) = __dev; ... return ret; // __free cleanup fires on error The __free(free_msi_irqs) cleanup calls pci_free_msi_irqs(), which already handles the unmap: void pci_free_msi_irqs(struct pci_dev *dev) { pci_msi_teardown_msi_irqs(dev); if (dev->msix_base) { iounmap(dev->msix_base); // already unmapped here dev->msix_base = NULL; // and set to NULL } } So dev->msix_base is unmapped and set to NULL before msix_setup_interrupts() returns to msix_capability_init(). The "goto out_unmap" introduced by commit 1a8d4c6ecb4c ("PCI/MSI: Unmap MSI-X region on error") then calls iounmap() a second time on a NULL pointer. This was reproduced on Intel Emerald Rapids (192 CPUs) while running tools/testing/selftests/kexec/test_kexec_jump.sh: WARNING: CPU#44 at iounmap+0x2a/0xe0 RIP: 0010:iounmap+0x2a/0xe0 RDI: 0000000000000000 Call Trace: msix_capability_init+0x317/0x3f0 __pci_enable_msix_range+0x21d/0x2c0 pci_alloc_irq_vectors_affinity+0xa9/0x130 nvme_setup_io_queues+0x2a8/0x420 [nvme] nvme_reset_work+0x151/0x340 [nvme] ... RDI=0 confirms iounmap() is called with NULL. Restore the original "goto out_disable" and leave the unmap to the existing __free(free_msi_irqs) cleanup. | ||||
| CVE-2026-80556 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: mmc: atmel-mci: Fix use-after-free in atmci_remove due to race condition In atmci_probe, &host->bh_work is bound with atmci_work_func, and atmci_interrupt, atmci_timeout_timer and atmci_dma_complete can all queue this work on system_bh_wq. If we remove the module, atmci_remove makes cleanup and the memory allocated for host with devm_kzalloc() is released after the remove callback returns, while the work mentioned above may still be pending or running. The sequence of operations that may lead to a UAF bug is as follows: CPU0 CPU1 | atmci_interrupt | queue_work(system_bh_wq, | &host->bh_work) atmci_remove | atmci_cleanup_slot(...) | atmci_writel(host, ATMCI_IDR, ~0UL) | timer_delete_sync(&host->timer) | dma_release_channel(host->dma.chan) | free_irq(platform_get_irq(pdev, 0), host) | | atmci_work_func | // use host // devm resources released after | // remove returns, host is freed | | // use host (use-after-free) Fix it by canceling the work after all the sources that can schedule it (IRQ handler, timeout timer and DMA completion callback) have been stopped, and before proceeding with the remaining cleanup in atmci_remove. | ||||
| CVE-2026-80560 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: openrisc: signal: do not restore privileged SR bits on sigreturn restore_sigcontext() copies the whole supervision register (SR) from the signal frame and only clears SPR_SR_SM before the value is reloaded into the hardware SR (through ESR and l.rfe) on the return to user space. All other SR bits are left under user control. An unprivileged task can thus return from a signal handler through a crafted sigframe that clears SPR_SR_DME. With the data MMU disabled the CPU performs no translation or protection on data accesses, so the task gains read and write access to arbitrary physical memory, a local privilege escalation. SPR_SR_IME, SPR_SR_SUMRA, SPR_SR_LEE, SPR_SR_EPH and the cache-enable bits are exposed the same way. The ptrace GPR regset already refuses any change to SR for exactly this reason. Restore only the arithmetic flag bits (F, CY, OV) from the signal frame and take every privileged control bit from the SR the kernel saved on signal entry. Verified with qemu-system-or1k -M or1k-sim: before this change an unprivileged PoC clears SPR_SR_DME in rt_sigreturn and writes a marker to physical address 0x03000000 (beyond the kernel's mem=32M); afterwards the same PoC receives SIGSEGV and physical memory is unchanged. | ||||
| CVE-2026-74751 | 1 Linux | 1 Linux Kernel | 2026-08-28 | 9.4 Critical |
| In the Linux kernel, the following vulnerability has been resolved: riscv: lib: Fix ZBB strnlen reading past count boundary The ZBB-optimized strnlen loop loads one word ahead before checking the aligned boundary: REG_L t1, SZREG(t0) // load next word addi t0, t0, SZREG // advance orc.b t1, t1 bgeu t0, t4, 4f // boundary check AFTER load where t4 = (s + count) & -SZREG. When s is aligned and count is a multiple of SZREG, t4 equals s + count and the loop loads a full word starting at exactly s + count. If s + count falls on a page boundary with the next page unmapped, this faults. Fix by computing the aligned boundary from the last valid byte (s + count - 1) instead of s + count. This makes the loop stop at the word containing the last valid byte rather than potentially loading the word after it. The count == 0 case is already handled by the beqz early exit. Also add a pre-loop guard (bgeu t0, t4) for the case where all valid bytes fit within the first word. With the adjusted boundary, t4 can equal t0, and entering the loop with stale register state from the first-word processing would produce incorrect results. The final minu clamp ensures the result is still correct when the last loaded word extends past s + count - 1 within the same aligned word. | ||||
| CVE-2026-80583 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ASoC: codecs: lpass-tx-macro: Fix enum kcontrol accesses The "DEC0 MODE" to "DEC7 MODE" controls are enumerated, but tx_macro_dec_mode_get() and tx_macro_dec_mode_put() access their value through ucontrol->value.integer.value[0] (a long) instead of ucontrol->value.enumerated.item[0] (an unsigned int). This same pattern was fixed in the sibling drivers by commit bcfe5f76cc40 ("ASoC: codecs: rx-macro: fix accessing array out of bounds for enum type") and commit 0ea5eff7c606 ("ASoC: codecs: va-macro: fix accessing array out of bounds for enum type"), but tx-macro was missed. On 64-bit kernels built with CONFIG_SND_CTL_DEBUG, the elem value sanity check catches the 4 bytes written past the enumerated item and every read of these controls fails with -EINVAL: snd-sm8250 sound: control 2:0:0:DEC0 MODE:0: access overflow | ||||
| CVE-2026-80562 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: gpio: ml-ioh: use raw_spinlock_t for the register lock ioh_irq_type() is registered as the irq_chip .irq_set_type callback and takes chip->spinlock with spin_lock_irqsave(). This callback is reached from __setup_irq() -> __irq_set_trigger() -> chip->irq_set_type() while the caller holds desc->lock, a raw_spinlock_t, with hardirqs disabled. That context is not sleepable, but on PREEMPT_RT a regular spinlock_t is an rtmutex-backed sleeping lock, so acquiring it there is invalid. ioh_irq_enable() and ioh_irq_disable() take the same lock from the .irq_enable/.irq_disable callbacks, which are likewise invoked with desc->lock held. Convert the register lock to raw_spinlock_t. The same lock also serializes the GPIO direction/value callbacks and the suspend/resume register save/restore, and those critical sections only perform short sequences of MMIO register accesses (ioread32()/iowrite32()); the .irq_set_type callback additionally emits a dev_warn() on an unsupported type. None of these are sleepable operations, so keeping this register lock non-sleeping is appropriate for the irqchip callbacks and does not change the GPIO-side locking contract. This is the same fix as commit a02b8950d619 ("gpio: pch: use raw_spinlock_t for the register lock"); this driver shares the same structure as gpio-pch. | ||||
| CVE-2026-72075 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: Input: ims-pcu - fix race condition in reset_device sysfs callback The ims_pcu_reset_device() sysfs callback calls ims_pcu_execute_command() without acquiring pcu->cmd_mutex. This can lead to data races and corruption of the shared command buffer if triggered concurrently with other commands. Acquire pcu->cmd_mutex before calling ims_pcu_execute_command(). | ||||
| CVE-2026-80555 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.1 High |
| In the Linux kernel, the following vulnerability has been resolved: s390/vfio_ccw: Free all memory if cp_init() fails The routine cp_free() is called to unpin/free any memory once an I/O is completed successfully, or if cp_prefetch() fails. But if cp_init() fails, and cp->initialized is not enabled, the same routine cannot be used to free all the memory. An attempt to address this exists in ccwchain_handle_ccw(), where a single call to ccwchain_free() is made for the currently-processed CCW segment. But this will leak other segments (created as a result of a Transfer in Channel) that had been allocated as part of the same channel program. Address this by performing the cleanup outside of the recursive ccwchain_handle_ccw()/ccwchain_loop_tic() logic. | ||||
| CVE-2026-80534 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: xfs: fix ilock leak on error in xfs_dq_get_next_id xfs_dq_get_next_id() takes the quota inode ILOCK before calling xfs_iread_extents(). If xfs_iread_extents() fails, the function returns immediately without releasing the lock, leaking the quota inode ILOCK. This can leave the quota inode locked and cause subsequent quota operations to hang. Fix this by jumping to a common unlock path on error instead of returning directly. | ||||
| CVE-2026-74657 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ipv4: Fix fib_nlmsg_size() for RTA_VIA nexthops fib_nlmsg_size() still estimates nexthop space as if every gateway is encoded as an IPv4 RTA_GATEWAY attribute. IPv4 routes can also carry an IPv6 gateway, which fib_nexthop_info() dumps as RTA_VIA. As a result, route notifications can allocate an skb that is too small. fib_dump_info() then fails with -EMSGSIZE and rtmsg_fib() hits the WARN_ON() that marks such failures as a fib_nlmsg_size() bug. With panic_on_warn set, this becomes a kernel panic. Mirror the actual nexthop dump layout in fib_nlmsg_size(): account for IPv6 nexthop gateways dumped as RTA_VIA, for the no-header rtnexthop layout used inside RTA_MULTIPATH, and for RTA_FLOW only when it is actually present. | ||||
| CVE-2026-74655 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: serial: qcom-geni: fix TX DMA buffer flush When transmit flushing a qcom-geni UART during an ongoing TX DMA, the UART gets stuck infinitely repeating corrupted TX DMA frames. The DMA-mode uart_ops does not provide a flush_buffer callback, so an in-flight transfer can complete after serial core has reset the transmit kfifo, underflowing its length and resubmitting page-sized transfers indefinitely. Add one that stops the transfer and clears tx_remaining and tx_queued. The stop path was also broken: it unmapped the buffer while the serial engine could still read it, and never reset the TX DMA state machine. Cancel the main sequencer command first, then reset the state machine and wait for it before unmapping. Drop the early return so a pending mapping is also cleaned up when the main command is inactive. The bug can be triggered from userspace with a large write immediately followed by TCOFLUSH. A following tcdrain will hang forever. The bug was reproduced and this fix was validated on Arduino Uno Q (QRB2210) using /dev/ttyHS1. | ||||
| CVE-2026-74653 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: serial: 8250_of: clear stuck empty-FIFO RX-timeout on LPC32xx The NXP LPC32xx UART (PORT_LPC3220) can latch an RX character-timeout interrupt while the RX FIFO is empty: IIR reports UART_IIR_RX_TIMEOUT (0x0c) but LSR.DR is clear. A character timeout is only cleared by reading RHR, but serial8250_rx_chars() reads RHR only when LSR.DR is set, so nothing ever clears the condition. The interrupt is level-triggered and re-fires immediately, so on a single-core ARM926 the resulting interrupt storm livelocks the CPU. It is reproducible when userspace repeatedly opens the front-panel port (ttyS1): serial8250_do_set_termios() re-enables interrupts on unlock and the handler then spins forever with iir=0xcc lsr=0x60 ier=0x05, tripping the soft-lockup detector in serial8250_handle_irq_locked(). LPC32xx has no dedicated 8250 glue driver, it's driven by the generic 8250_of. Add a hardware specific handle_irq for PORT_LPC3220, wired up in of_platform_serial_setup() the same way fsl8250_handle_irq is installed. The handler follows dw8250_handle_irq(): on an RX timeout with an empty FIFO (LSR.DR and LSR.BI clear) it does one throwaway RHR read to clear the condition, then calls serial8250_handle_irq_locked(). No real received data is ever discarded, and it is a no-op on healthy UARTs which never report a timeout with DR clear. This is the same class of bug already worked around in other 8250 drivers; see commit 424d79183af0 ("serial: 8250_dw: Avoid "too much work" from bogus rx timeout interrupt") which reports the identical iir=0xcc/lsr=0x60. See also UART_RX_TIMEOUT_QUIRK in 8250_omap, and the note in 8250_bcm7271. | ||||
| CVE-2026-74650 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: staging: rtl8723bs: fix OOB read in WMM_param_handler() WMM_param_handler() copies a fixed-size WMM parameter element out of a received information element without checking that the element is long enough, causing an out-of-bounds read for a short WMM IE. The handler reads sizeof(struct WMM_para_element) (18) bytes at pIE->data + 6, so it requires pIE->length to be at least 24 (WLAN_WMM_LEN), but it never validates the length. Two of its three callers reach it after matching only the WMM OUI: OnAssocRsp() in rtw_mlme_ext.c matches a 6-byte OUI, and join_cmd_hdl() matches a 4-byte OUI, before calling the handler. A vendor-specific IE carrying the WMM OUI but a length between 6 and 23, placed in an association response or in the IE blob handed to join_cmd_hdl(), passes the OUI check and then makes the memcmp() and memcpy() at pIE->data + 6 read past the end of the element. OnAssocRsp() parses a frame received from the AP, so this is reachable from a remote peer. The remaining caller in rtw_wlan_util.c already guards the handler with "pIE->length == WLAN_WMM_LEN". Move the equivalent check into the handler itself so every caller is covered; the sibling IE handlers in the same parsing loop (HT_caps_handler(), HT_info_handler(), ERP_IE_handler()) likewise bound their accesses by pIE->length. | ||||
| CVE-2026-74647 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: misc: fastrpc: Remove buffer from list prior to unmap operation fastrpc_req_munmap_impl() is called to unmap any buffer. The buffer is getting removed from the list after it is unmapped from DSP. This can create potential race conditions if multiple threads invoke unmap concurrently, where one thread may remove the entry from the list while another thread's unmap operation is still ongoing. Fix this by removing the buffer entry from the list before calling the unmap operation. If the unmap fails, the entry is re-added to the list so that userspace can retry the unmap, or alternatively, the buffer will be cleaned up during device release when the DSP process is torn down and all DSP-side mappings are freed along with remaining buffers in the list. | ||||
| CVE-2026-74637 | 1 Linux | 1 Linux Kernel | 2026-08-27 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: perf/core: Fix group leader use-after-free after sibling detach perf_group_detach() handles leader and sibling detach differently. When the group leader is detached, all siblings are promoted to singleton events and their group_leader pointer is reset to themselves. When a sibling is detached, it is removed from the leader's sibling_list, but its group_leader pointer is left pointing at the old leader. That is harmless when the sibling is being closed and freed immediately, as in the DETACH_DEAD path. It is not safe when the sibling is detached but kept alive, such as during CPU hotplug with DETACH_GROUP. In that case the sibling is removed from the context, while its file descriptor can still keep it alive. A typical failing sequence is: - A group contains leader L and sibling S. - CPU hot-unplug detaches S with DETACH_GROUP, removing it from L->sibling_list but leaving S->group_leader == L. - L is later closed and freed. - A PERF_IOC_FLAG_GROUP ioctl on S follows S->group_leader and dereferences the freed leader. This was reproduced by running the perf event fuzzer, CPU hotplug, and a stress workload concurrently: Unable to handle kernel paging request at virtual address 006b6b6b6b6b6cdb CPU: 2 PID: 12489 Comm: perf_fuzzer 6.18.7 PREEMPT pc : perf_ioctl+0x34c/0xc68 x20: ffffff89a3fa2c70 x8 : 6b6b6b6b6b6b6b6b Code: 943c4a0e 340047a0 f9404a94 f9411e88 (f940b908) Call trace: perf_ioctl+0x34c/0xc68 (P) __arm64_sys_ioctl+0xa0/0xf4 invoke_syscall+0x58/0xe4 el0_svc_common+0xa8/0xdc do_el0_svc+0x1c/0x28 el0_svc+0x40/0xc0 el0t_64_sync_handler+0x68/0xdc el0t_64_sync+0x1c4/0x1c8 The fault happened in perf_ioctl(), where perf_event_for_each() follows the stale group_leader pointer and perf_event_for_each_child() then dereferences the freed leader's context. Fix the use-after-free by promoting the detached sibling to a singleton. Also fix __event_disable() cgroup accounting and event state change. | ||||