| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix out-of-bounds read on option matching
In nf_osf_match(), the nf_osf_hdr_ctx structure is initialized once
and passed by reference to nf_osf_match_one() for each fingerprint
checked. During TCP option parsing, nf_osf_match_one() advances the
shared ctx->optp pointer.
If a fingerprint perfectly matches, the function returns early without
restoring ctx->optp to its initial state. If the user has configured
NF_OSF_LOGLEVEL_ALL, the loop continues to the next fingerprint.
However, because ctx->optp was not restored, the next call to
nf_osf_match_one() starts parsing from the end of the options buffer.
This causes subsequent matches to read garbage data and fail
immediately, making it impossible to log more than one match or logging
incorrect matches.
Instead of using a shared ctx->optp pointer, pass the context as a
constant pointer and use a local pointer (optp) for TCP option
traversal. This makes nf_osf_match_one() strictly stateless from the
caller's perspective, ensuring every fingerprint check starts at the
correct option offset. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nfnetlink_osf: fix potential NULL dereference in ttl check
The nf_osf_ttl() function accessed skb->dev to perform a local interface
address lookup without verifying that the device pointer was valid.
Additionally, the implementation utilized an in_dev_for_each_ifa_rcu
loop to match the packet source address against local interface
addresses. It assumed that packets from the same subnet should not see a
decrement on the initial TTL. A packet might appear it is from the same
subnet but it actually isn't especially in modern environments with
containers and virtual switching.
Remove the device dereference and interface loop. Replace the logic with
a switch statement that evaluates the TTL according to the ttl_check. |
| In the Linux kernel, the following vulnerability has been resolved:
sched/psi: fix race between file release and pressure write
A potential race condition exists between pressure write and cgroup file
release regarding the priv member of struct kernfs_open_file, which
triggers the uaf reported in [1].
Consider the following scenario involving execution on two separate CPUs:
CPU0 CPU1
==== ====
vfs_rmdir()
kernfs_iop_rmdir()
cgroup_rmdir()
cgroup_kn_lock_live()
cgroup_destroy_locked()
cgroup_addrm_files()
cgroup_rm_file()
kernfs_remove_by_name()
kernfs_remove_by_name_ns()
vfs_write() __kernfs_remove()
new_sync_write() kernfs_drain()
kernfs_fop_write_iter() kernfs_drain_open_files()
cgroup_file_write() kernfs_release_file()
pressure_write() cgroup_file_release()
ctx = of->priv;
kfree(ctx);
of->priv = NULL;
cgroup_kn_unlock()
cgroup_kn_lock_live()
cgroup_get(cgrp)
cgroup_kn_unlock()
if (ctx->psi.trigger) // here, trigger uaf for ctx, that is of->priv
The cgroup_rmdir() is protected by the cgroup_mutex, it also safeguards
the memory deallocation of of->priv performed within cgroup_file_release().
However, the operations involving of->priv executed within pressure_write()
are not entirely covered by the protection of cgroup_mutex. Consequently,
if the code in pressure_write(), specifically the section handling the
ctx variable executes after cgroup_file_release() has completed, a uaf
vulnerability involving of->priv is triggered.
Therefore, the issue can be resolved by extending the scope of the
cgroup_mutex lock within pressure_write() to encompass all code paths
involving of->priv, thereby properly synchronizing the race condition
occurring between cgroup_file_release() and pressure_write().
And, if an live kn lock can be successfully acquired while executing
the pressure write operation, it indicates that the cgroup deletion
process has not yet reached its final stage; consequently, the priv
pointer within open_file cannot be NULL. Therefore, the operation to
retrieve the ctx value must be moved to a point *after* the live kn
lock has been successfully acquired.
In another situation, specifically after entering cgroup_kn_lock_live()
but before acquiring cgroup_mutex, there exists a different class of
race condition:
CPU0: write memory.pressure CPU1: write cgroup.pressure=0
=========================== =============================
kernfs_fop_write_iter()
kernfs_get_active_of(of)
pressure_write()
cgroup_kn_lock_live(memory.pressure)
cgroup_tryget(cgrp)
kernfs_break_active_protection(kn)
... blocks on cgroup_mutex
cgroup_pressure_write()
cgroup_kn_lock_live(cgroup.pressure)
cgroup_file_show(memory.pressure, false)
kernfs_show(false)
kernfs_drain_open_files()
cgroup_file_release(of)
kfree(ctx)
of->priv = NULL
cgroup_kn_unlock()
... acquires cgroup_mutex
ctx = of->priv; // may now be NULL
if (ctx->psi.trigger) // NULL dereference
Consequently, there is a possibility that of->priv is NULL, the pressure
write needs to check for this.
Now that the scope of the cgroup_mutex has been expanded, the original
explicit cgroup_get/put operations are no longer necessary, this is
because acquiring/releasing the live kn lock inherently executes a
cgroup get/put operation.
[1]
BUG: KASAN: slab-use-after-free in pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011
Call Trace:
pressure_write+0xa4/0x210 kernel/cgroup/cgroup.c:4011
cgroup_file_write+0x36f/0x790 kernel/cgroup/cgroup.c:43
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
neigh: let neigh_xmit take skb ownership
neigh_xmit always releases the skb, except when no neighbour table is
found. But even the first added user of neigh_xmit (mpls) relied on
neigh_xmit to release the skb (or queue it for tx).
sashiko reported:
If neigh_xmit() is called with an uninitialized neighbor table (for
example, NEIGH_ND_TABLE when IPv6 is disabled), it returns -EAFNOSUPPORT
and bypasses its internal out_kfree_skb error path. Because the return
value of neigh_xmit() is ignored here, does this leak the SKB?
Assume full ownership and remove the last code path that doesn't
xmit or free skb. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix error cleanup in xe_exec_queue_create_ioctl()
Two error handling issues exist in xe_exec_queue_create_ioctl():
1. When xe_hw_engine_group_add_exec_queue() fails, the error path jumps
to put_exec_queue which skips xe_exec_queue_kill(). If the VM is in
preempt fence mode, xe_vm_add_compute_exec_queue() has already added
the queue to the VM's compute exec queue list. Skipping the kill
leaves the queue on that list, leading to a dangling pointer after
the queue is freed.
2. When xa_alloc() fails after xe_hw_engine_group_add_exec_queue() has
succeeded, the error path does not call
xe_hw_engine_group_del_exec_queue() to remove the queue from the hw
engine group list. The queue is then freed while still linked into
the hw engine group, causing a use-after-free.
Fix both by:
- Changing the xe_hw_engine_group_add_exec_queue() failure path to jump
to kill_exec_queue so that xe_exec_queue_kill() properly removes the
queue from the VM's compute list.
- Adding a del_hw_engine_group label before kill_exec_queue for the
xa_alloc() failure path, which removes the queue from the hw engine
group before proceeding with the rest of the cleanup.
(cherry picked from commit 37c831f401746a45d510b312b0ed7a77b1e06ec8) |
| In the Linux kernel, the following vulnerability has been resolved:
futex: Drop CLONE_THREAD requirement for private default hash alloc
Currently need_futex_hash_allocate_default() depends on strict pthread
semantics, abusing CLONE_THREAD. This breaks the non-concurrency
assumptions when doing the mm->futex_ref pcpu allocations, leading to
bugs[0] when sharing the mm in other ways; ie:
BUG: KASAN: slab-use-after-free in futex_hash_put
... where the +1 bias can end up on a percpu counter that mm->futex_ref
no longer points at.
Loosen the check to cover any CLONE_VM clone, except vfork(). Excluding
vfork keeps the existing paths untouched (no overhead), and we can't
race in the first place: either the parent is suspended and the child
runs alone, or mm->futex_ref is already allocated from an earlier
CLONE_VM. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential null-ptr-deref in decode_choose_args()
A message of type CEPH_MSG_OSD_MAP contains an OSD map that itself
contains a CRUSH map. When decoding this CRUSH map in crush_decode(), an
array of max_buckets CRUSH buckets is decoded, where some indices may
not refer to actual buckets and are therefore set to NULL. The received
CRUSH map may optionally contain choose_args that get decoded in
decode_choose_args(). When decoding a crush_choose_arg_map, a series of
choose_args for different buckets is decoded, with the bucket_index
being read from the incoming message. It is only checked that the bucket
index does not exceed max_buckets, but not that it doesn't point to an
index with a NULL bucket. If a (potentially corrupted) message contains
a crush_choose_arg_map including such a bucket_index, a null pointer
dereference may occur in the subsequent processing when attempting to
access the bucket with the given index.
This patch fixes the issue by extending the affected check. Now, it is
only attempted to access the bucket if it is not NULL. |
| In the Linux kernel, the following vulnerability has been resolved:
libceph: Fix potential out-of-bounds access in __ceph_x_decrypt()
In __ceph_x_decrypt(), a part of the buffer p is interpreted as a
ceph_x_encrypt_header, and the magic field of this struct is accessed.
This happens without any guarantee that the buffer is large enough to
hold this struct. The function parameter ciphertext_len represents the
length of the ciphertext to decrypt and is guaranteed to be at most the
remaining size of the allocated buffer p. However, this value is not
necessarily greater than sizeof(ceph_x_encrypt_header). E.g., a message
frame of type FRAME_TAG_AUTH_REPLY_MORE, that is just as long to hold
the ciphertext at its end with a ciphertext_len of 8 or less, can
trigger an out-of-bounds memory access when accessing hdr->magic.
This patch fixes the issue by adding a check to ensure that the
decrypted plaintext in the buffer is large enough to represent at least
the ceph_x_encrypt_header. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/dma-buf: fix UAF with retry loop
Retry doesn't work here, since bo will be freed on error, leading to
UAF. However, now that we do the alloc & init before the attach, we can
now combine this as one unit and have the init do the alloc for us. This
should make the retry safe.
Reported by Sashiko.
v2: Fix up the error unwind (CI)
(cherry picked from commit 479669418253e0f27f8cf5db01a731352ea592e7) |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: fix missing zerocopy reference in pskb_carve helpers
pskb_carve_inside_header() and pskb_carve_inside_nonlinear() both copy
the old skb_shared_info header into a new buffer via memcpy(), which
includes the destructor_arg pointer (uarg) for MSG_ZEROCOPY skbs.
Neither function calls net_zcopy_get() for the new shinfo, creating an
unaccounted holder: every skb_shared_info with destructor_arg set will
call skb_zcopy_clear() once when freed, but the corresponding
net_zcopy_get() was never called for the new copy. Repeated calls
drive uarg->refcnt to zero prematurely, freeing ubuf_info_msgzc while
TX skbs still hold live destructor_arg pointers.
KASAN reports use-after-free on a freed ubuf_info_msgzc:
BUG: KASAN: slab-use-after-free in skb_release_data+0x77b/0x810
Read of size 8 at addr ffff88801574d3e8 by task poc/220
Call Trace:
skb_release_data+0x77b/0x810
kfree_skb_list_reason+0x13e/0x610
skb_release_data+0x4cd/0x810
sk_skb_reason_drop+0xf3/0x340
skb_queue_purge_reason+0x282/0x440
rds_tcp_inc_free+0x1e/0x30
rds_recvmsg+0x354/0x1780
__sys_recvmsg+0xdf/0x180
Allocated by task 219:
msg_zerocopy_realloc+0x157/0x7b0
tcp_sendmsg_locked+0x2892/0x3ba0
Freed by task 219:
ip_recv_error+0x74a/0xb10
tcp_recvmsg+0x475/0x530
The skb consuming the late access still referenced the same uarg via
shinfo->destructor_arg copied by pskb_carve_inside_nonlinear() without
a refcount bump. This has been verified to be reliably exploitable: a
working proof-of-concept achieves full root privilege escalation from
an unprivileged local user on a default kernel configuration.
The fix follows the pattern of pskb_expand_head() which has the same
memcpy/cloned structure. For pskb_carve_inside_header(), net_zcopy_get()
is placed after skb_orphan_frags() succeeds, so the orphan error path
needs no cleanup. For pskb_carve_inside_nonlinear(), net_zcopy_get() is
placed after all failure points and just before skb_release_data(), so
no error path needs cleanup at all -- matching pskb_expand_head() more
closely and avoiding the need for a balancing net_zcopy_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_log: validate MAC header was set before dumping it
The fallback path of dump_mac_header() guards the MAC header access
only with "skb->mac_header != skb->network_header", without checking
skb_mac_header_was_set(). When the MAC header is unset, mac_header is
0xffff, so the test passes and skb_mac_header(skb) returns
skb->head + 0xffff, ~64 KiB past the buffer; the loop then reads
dev->hard_header_len bytes out of bounds into the kernel log.
This is reachable via the netdev logger: nf_log_unknown_packet() calls
dump_mac_header() unconditionally, and an skb sent through AF_PACKET
with PACKET_QDISC_BYPASS reaches the egress hook with mac_header still
unset (__dev_queue_xmit(), which would reset it, is bypassed).
Add the skb_mac_header_was_set() check the ARPHRD_ETHER path already
uses, and replace the open-coded MAC header length test with
skb_mac_header_len(). Only skbs with an unset MAC header are affected;
valid ones are dumped as before.
BUG: KASAN: slab-out-of-bounds in dump_mac_header (net/netfilter/nf_log_syslog.c:831)
Read of size 1 at addr ffff88800ea49d3f by task exploit/148
Call Trace:
kasan_report (mm/kasan/report.c:595)
dump_mac_header (net/netfilter/nf_log_syslog.c:831)
nf_log_netdev_packet (net/netfilter/nf_log_syslog.c:938 net/netfilter/nf_log_syslog.c:963)
nf_log_packet (net/netfilter/nf_log.c:260)
nft_log_eval (net/netfilter/nft_log.c:60)
nft_do_chain (net/netfilter/nf_tables_core.c:285)
nft_do_chain_netdev (net/netfilter/nft_chain_filter.c:307)
nf_hook_slow (net/netfilter/core.c:619)
nf_hook_direct_egress (net/packet/af_packet.c:257)
packet_xmit (net/packet/af_packet.c:280)
packet_sendmsg (net/packet/af_packet.c:3114)
__sys_sendto (net/socket.c:2265) |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: ebtables: fix OOB read in compat_mtw_from_user
Luxiao Xu says:
The function compat_mtw_from_user() converts ebtables extensions from
32-bit user structures to kernel native structures. However, it lacks
proper validation of the user-supplied match_size/target_size.
When certain extensions are processed, the kernel-side translation
logic may perform memory accesses based on the extension's expected
size. If the user provides a size smaller than what the extension
requires, it results in an out-of-bounds read as reported by KASAN.
This fix introduces a check to ensure match_size is at least as large
as the extension's required compatsize. This covers matches, watchers,
and targets, while maintaining compatibility with standard targets.
AFAIU this is relevant for matches that need to go though
match->compat_from_user() call. Those that use plain memcpy with the
user-provided size are ok because the caller checks that size vs the
start of the next rule entry offset (which itself is checked vs. total
size copied from userspace).
The ->compat_from_user() callbacks assume they can read compatsize bytes,
so they need this extra check.
Based on an earlier patch from Luxiao Xu. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_queue: hold bridge skb->dev while queued
br_pass_frame_up() rewrites skb->dev from the ingress port to the bridge
master before queueing bridge LOCAL_IN packets. NFQUEUE only holds
references on state.in/out and bridge physdevs, so a queued bridge
packet can retain a freed bridge master in skb->dev until reinjection.
When the verdict is reinjected later, br_netif_receive_skb() re-enters
the receive path with skb->dev still pointing at the freed bridge master,
triggering a use-after-free.
Store skb->dev in the queue entry, hold a reference on it for the queue
lifetime, and use the saved device when dropping queued packets during
NETDEV_DOWN handling. |
| In the Linux kernel, the following vulnerability has been resolved:
Revert "net/smc: Introduce TCP ULP support"
This reverts commit d7cd421da9da2cc7b4d25b8537f66db5c8331c40.
As reported by Al Viro, the TCP ULP support for SMC is fundamentally
broken. The implementation attempts to convert an active TCP socket
into an SMC socket by modifying the underlying `struct file`, dentry,
and inode in-place, which violates core VFS invariants that assume
these structures are immutable for an open file, creating a risk of
use after free errors and general system instability.
Given the severity of this design flaw and the fact that cleaner
alternatives (e.g., LD_PRELOAD, BPF) exist for legacy application
transparency, the correct course of action is to remove this feature
entirely. |
| In the Linux kernel, the following vulnerability has been resolved:
net: gro: don't merge zcopy skbs
skb_gro_receive() can currently copy frags between the source and GRO
skb, without checking the zerocopy status, and in particular the
SKBFL_MANAGED_FRAG_REFS flag.
When SKBFL_MANAGED_FRAG_REFS is set, the skb doesn't hold a reference
on the pages in shinfo->frags. Appending those frags to another skb's
frags without fixing up the page refcount can lead to UAF.
When either the last skb in the GRO chain (the one we would append
frags to) or the source skb is zerocopy, don't merge the skbs. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_uart: fix UAFs and race conditions in close and init paths
Vulnerabilities leading to Use-After-Free (UAF) and Null Pointer
Dereference (NPD) conditions were observed in the lifecycle management
of hci_uart.
The primary issue arises because the workqueues (init_ready and
write_work) are only flushed/cancelled if the HCI_UART_PROTO_READY
flag is set during TTY close. If a hangup occurs before setup completes,
hci_uart_tty_close() skips the teardown of these workqueues and
proceeds to free the `hu` struct. When the scheduled work executes
later, it blindly dereferences the freed `hu` struct.
Furthermore, several data races and UAFs were identified in the teardown
sequence:
1. Calling hci_uart_flush() from hci_uart_close() without effectively
disabling write_work causes a race condition where both can concurrently
double-free hu->tx_skb. This happens because protocol timers can
concurrently invoke hci_uart_tx_wakeup() and requeue write_work.
2. Calling hci_free_dev(hdev) before hu->proto->close(hu) causes a UAF
when vendor specific protocol close callbacks dereference hu->hdev.
3. In the initialization error paths, failing to take the proto_lock
write lock before clearing PROTO_READY leads to races with active
readers. Additionally, hci_uart_tty_receive() accesses hu->hdev
outside the read lock, leading to UAFs if the initialization error
path frees hdev concurrently.
Fix these synchronization and lifecycle issues by:
1. Re-ordering hci_uart_tty_close() to clear HCI_UART_PROTO_READY first,
followed immediately by a cancel_work_sync(&hu->write_work). Clearing
the flag locks out concurrent protocol timers from successfully invoking
hci_uart_tx_wakeup(), effectively rendering the cancellation permanent
and preventing the tx_skb double-free.
2. Note: Clearing PROTO_READY early causes hci_uart_close() to skip
hu->proto->flush(). This is perfectly safe in the tty_close path
because hu->proto->close() executes shortly after, which intrinsically
purges all protocol SKB queues and tears down the state.
3. Relocating hu->proto->close(hu) strictly prior to hci_free_dev(hdev)
across all close and error paths to prevent vendor-level UAFs.
4. Moving the hdev->stat.byte_rx increment in hci_uart_tty_receive()
inside the proto_lock read-side critical section to safely synchronize
with device unregistration.
5. Adding cancel_work_sync(&hu->write_work) to hci_uart_close() to safely
flush the workqueue before hci_uart_flush() is invoked via the HCI core.
6. Utilizing cancel_work_sync() instead of disable_work_sync() across
all paths to prevent permanently breaking user-space retry capabilities. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Fix out-of-bounds stream encoder index v3
eng_id can be negative and that stream_enc_regs[]
can be indexed out of bounds.
eng_id is used directly as an index into stream_enc_regs[], which has
only 5 entries. When eng_id is 5 (ENGINE_ID_DIGF) or negative, this can
access memory past the end of the array.
Add a bounds check using ARRAY_SIZE() before using eng_id as an index.
The unsigned cast also rejects negative values.
This avoids out-of-bounds access.
Fixes the below smatch error:
dcn*_resource.c: stream_encoder_create() may index
stream_enc_regs[eng_id] out of bounds (size 5).
drivers/gpu/drm/amd/amdgpu/../display/dc/resource/dcn351/dcn351_resource.c
1246 static struct stream_encoder *dcn35_stream_encoder_create(
1247 enum engine_id eng_id,
1248 struct dc_context *ctx)
1249 {
...
1255
1256 /* Mapping of VPG, AFMT, DME register blocks to DIO block instance */
1257 if (eng_id <= ENGINE_ID_DIGF) {
ENGINE_ID_DIGF is 5. should <= be <?
Unrelated but, ugh, why is Smatch saying that "eng_id" can be negative?
end_id is type signed long, but there are checks in the caller which prevent it from being negative.
1258 vpg_inst = eng_id;
1259 afmt_inst = eng_id;
1260 } else
1261 return NULL;
1262
...
1281
1282 dcn35_dio_stream_encoder_construct(enc1, ctx, ctx->dc_bios,
1283 eng_id, vpg, afmt,
--> 1284 &stream_enc_regs[eng_id],
^^^^^^^^^^^^^^^^^^^^^^^ This stream_enc_regs[] array has 5 elements so we are one element beyond the end of the array.
...
1287 return &enc1->base;
1288 }
v2: use explicit bounds check as suggested by Roman/Dan; avoid unsigned int cast
v3: The compiler already knows how to compare the two values, so the
cast (int) is not needed. (Roman) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/vcn4: Prevent OOB reads when parsing IB
Rewrite the IB parsing to use amdgpu_ib_get_value() which handles the
bounds checks. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/mlx5: Fix error path fall-through in mlx5_ib_dev_res_srq_init()
mlx5_ib_dev_res_srq_init() allocates two SRQs, s0 and s1. When
ib_create_srq() fails for s1, the error branch destroys s0 but falls
through and unconditionally assigns the freed s0 and the ERR_PTR s1 to
devr->s0 and devr->s1.
This leads to several problems: the lock-free fast path checks
"if (devr->s1) return 0;" and treats the ERR_PTR as already initialised;
users in mlx5_ib_create_qp() dereference the freed SRQ or ERR_PTR via
to_msrq(devr->s0)->msrq.srqn; and mlx5_ib_dev_res_cleanup() dereferences
the ERR_PTR and double-frees s0 on teardown.
Fix by adding the same `goto unlock` in the s1 failure path. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: use safe list iteration in radar detect work
The call to ieee80211_dfs_cac_cancel can cause the iterated chanctx to
be freed and removed from the list. Guard against this to avoid a
slab-use-after-free error. |
