| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. _XkbSetMapChecks() declares a fixed-size stack buffer mapWidths[256] indexed by key type index. The helper function CheckKeyTypes() writes to this buffer at a client-controlled offset, allowing a stack buffer overflow. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| A stack-based buffer overflow flaw was found in the X.Org X server and Xwayland. A mismatch between the X server and the libXfont2 library's maximum font name length can cause a stack buffer overflow during font alias resolution. The server allocates a 256 byte stack buffer but libXfont2's alias target name length is 1024 bytes. A font alias name between 257 and 1023 bytes causes the X server to copy that name into the undersized stack buffer without further checks. This may be used to crash the server, or for privilege escalation if the X server runs as root. |
| In trusted_mem, there is a possible escalation of privilege due to improper input validation. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is needed for exploitation. Patch ID: AUTO00834868; Issue ID: MSV-6533. |
| A weakness has been identified in Systerel S2OPC up to 1.7.3. This affects the function LockedStaMac_ProcessMsg_DeleteMonitoredItemsResponse of the file src/ClientServer/frontend/client_wrapper/internal/state_machine.c of the component DeleteMonitoredItemsRequest Handler. This manipulation causes out-of-bounds read. The attack can only be executed locally. The exploit has been made available to the public and could be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| The hawkBit device management client in subsys/mgmt/hawkbit accumulates the body of an HTTP response from the update server into a heap buffer in response_json_cb() (subsys/mgmt/hawkbit/hawkbit.c). The buffer is sized to hold the received body bytes but reserves no space for a terminating NUL. When the full response has arrived, the code writes response_data[downloaded_size] = '\0' — and whenever the accumulated body length equals the allocation, that terminator lands one byte past the end of the heap object (a heap-based out-of-bounds write, CWE-122 / CWE-787).
The body length and fragmentation are taken directly from the parsed HTTP response (rsp->body_frag_start / rsp->body_frag_len) and are fully controlled by the remote hawkBit server, which chooses its own response length. The precise trigger depends on how the buffer grows, and both forms are remotely reachable. Since v4.0.0 the reallocation is sized to exactly downloaded_size + body_len, so any response body larger than the 1100-byte initial buffer makes the out-of-bounds write deterministic; such response sizes are normal for hawkBit deployment metadata. Before v4.0.0 the buffer grew by doubling and the growth check ((downloaded_size + body_len) > response_buffer_size) is false at equality, so a response body whose length is exactly the current allocation — 1100 bytes with the default initial buffer — skips the reallocation entirely and writes the terminator at response_data[1100] of an 1100-byte object. The HTTP length-mismatch check does not catch this, because the declared and received lengths genuinely agree. Either form is reachable by a malicious, compromised, or man-in-the-middle update server (TLS is optional and, when enabled, does not protect against a hostile server), with no authentication of response content and no client-side length cap protecting the write.
The out-of-bounds write is a fixed single NUL byte immediately following the allocation, corrupting adjacent allocator metadata or the next allocation. The practical impact is heap corruption leading to denial of service (fault on a subsequent allocation or free), with the bounded, allocator-dependent possibility of further corruption. The fix sizes the buffer to the body length plus one and copies with memcpy, ensuring the terminator always lands within the allocation. |
| Integer overflow in Chromecast in Google Chrome prior to 150.0.7871.47 allowed a local attacker to execute arbitrary code via malicious network traffic. (Chromium security severity: Medium) |
| Insufficient input validation in Amazon Bedrock AgentCore harness might allow an authenticated remote user to execute configured tools bypassing model invocation and security controls via crafted content blocks in conversation messages. AWS has addressed this issue. No customer action is required. |
| An issue was discovered in router/upnp/src/ssdp.c in DD-WRT before 45724. An unsafe strcpy in the UPnP handling functionality allows an unauthenticated remote attacker to send a request that would overflow an internal fixed buffer. Exploitation requires the DD-WRT user to enable UPnP (which is off by default, and only listens on internal interfaces by default). This occurs in ssdp_msearch (reachable by an M-SEARCH request). |
| Weak configuration when UE does not verify the consistency of its additional security capabilities with the replayed capabilities. |
| Dell PowerProtect Data Manager, versions prior to 20.2.0.0, contain(s) a Generation of Incorrect Security Tokens vulnerability in the IAM. A low privileged attacker with remote access could potentially exploit this vulnerability, leading to Elevation of privileges. |
| AIOHTTP is an asynchronous HTTP client/server framework for asyncio and Python. Prior to 3.14.3, an out-of-bounds heap read could occur in the C response parser while building an error message for a malformed response. An attacker controlled server, or possibly an accidental response, could trigger a DoS in the client. The vulnerable path was error message construction in aiohttp/_http_parser.pyx, where an llhttp error-position pointer was used to build a snippet for malformed chunked responses and malformed request or response bytes at the buffer end. This issue is fixed in version 3.14.3. |
| A stack-based out-of-bounds read vulnerability exists in the "s_vlog" function of stunnel, when handling oversized log messages via "vsnprintf". A remote attacker with network access to a stunnel service can send protocol inputs that trigger a log message longer than 1024 bytes, leading to an out-of-bounds stack read and a potential crash. In certain corner cases, the same vulnerability could be used to replace a series of trailing "\n" characters with "\0". |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: bpa10x: avoid OOB read of revision string in bpa10x_setup()
bpa10x_setup() sends the vendor command 0xfc0e and passes the response
to bt_dev_info() and hci_set_fw_info() as a "%s" string starting at
skb->data + 1, without checking the length:
bt_dev_info(hdev, "%s", (char *)(skb->data + 1));
hci_set_fw_info(hdev, "%s", skb->data + 1);
A device that returns a one-byte response (status only) leaves
skb->data + 1 past the end of the data, and the %s walk reads adjacent
slab memory until it meets a NUL. The same happens when the payload is
not NUL-terminated within skb->len. The out-of-bounds bytes end up in
the kernel log and the firmware-info debugfs file.
Print the revision string with a bounded "%.*s" limited to skb->len - 1
instead. This keeps the string readable for well-behaved devices while
never reading past the received data, and does not fail setup, so a
device returning a short or unterminated response keeps working. |
| A buffer overflow was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Processing a maliciously crafted image may lead to arbitrary code execution. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Mounting a maliciously crafted disk image may cause unexpected system termination or corrupt kernel memory. |
| An out-of-bounds read was addressed with improved bounds checking. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. Parsing a maliciously crafted file may lead to an unexpected app termination. |
| The issue was addressed with improved bounds checks. This issue is fixed in macOS Sequoia 15.7.8, macOS Sonoma 14.8.8, macOS Tahoe 26.6. An app may be able to disclose kernel memory. |
| Out of bounds read in Media in Google Chrome on Mac prior to 151.0.7922.72 allowed a remote attacker who had compromised the renderer process to potentially perform a sandbox escape via a crafted HTML page. (Chromium security severity: Medium) |
| In wlan AP driver, there is a possible out of bounds write due to a missing bounds check. This could lead to remote (proximal/adjacent) escalation of privilege with no additional execution privileges needed. User interaction is not needed for exploitation. Patch ID: WCNCR00489200; Issue ID: MSV-7834. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Fix an out-of-bounds shift when invalidating TLB
When the size of the range invalidated is larger than
rounddown_pow_of_two(ULONG_MAX),
The function macro roundup_pow_of_two(length) will hit an out-of-bounds
shift [1].
Use a full TLB invalidation for such cases.
v2:
- Use a define for the range size limit over which we use a full
TLB invalidation. (Lucas)
- Use a better calculation of the limit.
[1]:
[ 39.202421] ------------[ cut here ]------------
[ 39.202657] UBSAN: shift-out-of-bounds in ./include/linux/log2.h:57:13
[ 39.202673] shift exponent 64 is too large for 64-bit type 'long unsigned int'
[ 39.202688] CPU: 8 UID: 0 PID: 3129 Comm: xe_exec_system_ Tainted: G U 6.14.0+ #10
[ 39.202690] Tainted: [U]=USER
[ 39.202690] Hardware name: ASUS System Product Name/PRIME B560M-A AC, BIOS 2001 02/01/2023
[ 39.202691] Call Trace:
[ 39.202692] <TASK>
[ 39.202695] dump_stack_lvl+0x6e/0xa0
[ 39.202699] ubsan_epilogue+0x5/0x30
[ 39.202701] __ubsan_handle_shift_out_of_bounds.cold+0x61/0xe6
[ 39.202705] xe_gt_tlb_invalidation_range.cold+0x1d/0x3a [xe]
[ 39.202800] ? find_held_lock+0x2b/0x80
[ 39.202803] ? mark_held_locks+0x40/0x70
[ 39.202806] xe_svm_invalidate+0x459/0x700 [xe]
[ 39.202897] drm_gpusvm_notifier_invalidate+0x4d/0x70 [drm_gpusvm]
[ 39.202900] __mmu_notifier_release+0x1f5/0x270
[ 39.202905] exit_mmap+0x40e/0x450
[ 39.202912] __mmput+0x45/0x110
[ 39.202914] exit_mm+0xc5/0x130
[ 39.202916] do_exit+0x21c/0x500
[ 39.202918] ? lockdep_hardirqs_on_prepare+0xdb/0x190
[ 39.202920] do_group_exit+0x36/0xa0
[ 39.202922] get_signal+0x8f8/0x900
[ 39.202926] arch_do_signal_or_restart+0x35/0x100
[ 39.202930] syscall_exit_to_user_mode+0x1fc/0x290
[ 39.202932] do_syscall_64+0xa1/0x180
[ 39.202934] ? do_user_addr_fault+0x59f/0x8a0
[ 39.202937] ? lock_release+0xd2/0x2a0
[ 39.202939] ? do_user_addr_fault+0x5a9/0x8a0
[ 39.202942] ? trace_hardirqs_off+0x4b/0xc0
[ 39.202944] ? clear_bhb_loop+0x25/0x80
[ 39.202946] ? clear_bhb_loop+0x25/0x80
[ 39.202947] ? clear_bhb_loop+0x25/0x80
[ 39.202950] entry_SYSCALL_64_after_hwframe+0x76/0x7e
[ 39.202952] RIP: 0033:0x7fa945e543e1
[ 39.202961] Code: Unable to access opcode bytes at 0x7fa945e543b7.
[ 39.202962] RSP: 002b:00007ffca8fb4170 EFLAGS: 00000293
[ 39.202963] RAX: 000000000000003d RBX: 0000000000000000 RCX: 00007fa945e543e3
[ 39.202964] RDX: 0000000000000000 RSI: 00007ffca8fb41ac RDI: 00000000ffffffff
[ 39.202964] RBP: 00007ffca8fb4190 R08: 0000000000000000 R09: 00007fa945f600a0
[ 39.202965] R10: 0000000000000000 R11: 0000000000000293 R12: 0000000000000000
[ 39.202966] R13: 00007fa9460dd310 R14: 00007ffca8fb41ac R15: 0000000000000000
[ 39.202970] </TASK>
[ 39.202970] ---[ end trace ]---
(cherry picked from commit b88f48f86500bc0b44b4f73ac66d500a40d320ad) |
