| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: defer node table free until after RCU readers
HSR node-list and node-status generic-netlink operations run under
rcu_read_lock(). They walk hsr->node_db through hsr_get_next_node() and
hsr_get_node_data(), but RTM_DELLINK teardown removes the same node table
with plain list_del() and frees each node immediately.
That lets a generic-netlink reader hold a struct hsr_node pointer across
hsr_dellink(). In a KASAN build, widening the reader window after
hsr_get_next_node() obtains the node reproduces a slab-use-after-free
when the reader copies node->macaddress_A; the freeing stack is
hsr_del_nodes() from hsr_dellink().
Use list_del_rcu() and defer the free through the existing
hsr_free_node_rcu() callback. This matches the lifetime rule used by the
HSR prune paths, which already delete nodes with list_del_rcu() and
call_rcu(). |
| In the Linux kernel, the following vulnerability has been resolved:
qed: fix double free in qed_cxt_tables_alloc()
If one of the later PF or VF CID bitmap allocations fails,
qed_cid_map_alloc() jumps to cid_map_fail and frees the previously
allocated CID bitmaps before returning an error. qed_cxt_tables_alloc()
then calls qed_cxt_mngr_free(), which invokes qed_cid_map_free()
again.
Fix this by setting each CID bitmap pointer to NULL after bitmap_free()
to avoid double free.
The bug was first flagged by an experimental analysis tool we are
developing for kernel memory-management bugs while analyzing
v6.13-rc1. The tool is still under development and is not yet publicly
available. Manual inspection confirms that the bug is still
present in v7.1-rc3.
Runtime reproduction was not attempted because exercising the failing
allocation path requires device-specific setup. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: capture fast-RX rate before mesh reuses skb->cb
ieee80211_invoke_fast_rx() reads RX status through
IEEE80211_SKB_RXCB(skb), which aliases the same skb->cb storage
that ieee80211_rx_mesh_data() reuses as IEEE80211_TX_INFO. In the
unicast forward path, mesh_data does:
info = IEEE80211_SKB_CB(fwd_skb);
memset(info, 0, sizeof(*info));
on the same skb the caller still names via rx->skb, then either
queues the skb for TX (success) or kfree_skb()'s it (no-route)
before returning RX_QUEUED. The caller's RX_QUEUED arm then
calls sta_stats_encode_rate(status) on memory that is either
zeroed (success path) or freed (no-route path). The latter is
KASAN slab-use-after-free in ieee80211_prepare_and_rx_handle.
Fix by encoding the rate from status before invoking
ieee80211_rx_mesh_data(), so the RX_QUEUED arm consumes a value
captured while status was still backed by valid memory. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/vmci: fix UAF when peer resets connection during handshake
vmci_transport_recv_connecting_server() returned err = 0 for a peer
RST in its default switch arm:
err = pkt->type == VMCI_TRANSPORT_PACKET_TYPE_RST ? 0 : -EINVAL;
That made vmci_transport_recv_listen() skip vsock_remove_pending(),
leaving the pending socket on the listener's pending_links with
sk_state = TCP_CLOSE while destroy: still dropped the explicit
reference taken before schedule_delayed_work().
One second later vsock_pending_work() observed is_pending=true and
performed full cleanup: vsock_remove_pending() then the two trailing
sock_put(sk) calls -- the first reached refcount 0 and __sk_freed
the socket, and the second wrote into the freed object:
BUG: KASAN: slab-use-after-free in refcount_warn_saturate
Write of size 4 at addr ffff88800b1cac80 by task kworker
Workqueue: events vsock_pending_work
Treat peer RST like any other unexpected packet type (err = -EINVAL).
All destroy: arms now return err < 0, so vmci_transport_recv_listen()
removes pending from pending_links synchronously and
vsock_pending_work() takes the is_pending=false / !rejected branch,
dropping only its own work reference. This also closes the
multi-packet race Sashiko reported on v2: pending is removed from
the list before any subsequent packet can find it.
The pre-existing sk_acceptq_removed() gap on the err < 0 path of
vmci_transport_recv_listen() that Sashiko also noted is not
introduced or changed by this patch.
Tested on lts-6.12.79 with KASAN: 52/100 unpatched -> 0/100 patched. |
| In the Linux kernel, the following vulnerability has been resolved:
ixgbevf: fix use-after-free in VEPA multicast source pruning
ixgbevf_clean_rx_irq() prunes frames whose source MAC matches the VF's
own address (VEPA multicast workaround) by freeing the skb and
continuing to the next descriptor:
dev_kfree_skb_irq(skb);
continue;
The skb pointer is declared outside the while loop and persists across
iterations. Because the continue skips the "skb = NULL" reset at the
bottom of the loop, the next iteration enters the "else if (skb)" path
and calls ixgbevf_add_rx_frag() on the freed skb, dereferencing
skb_shinfo(skb)->nr_frags - a use-after-free in NAPI softirq context.
The sibling driver iavf already handles this correctly by nulling the
pointer before continuing. Apply the same pattern here.
I do not have ixgbevf hardware; the bug was found by static analysis
(scan_drop_continue_loops.py + semgrep drop_continue_in_loop, multi-tool
corroboration with the highest score in the scan). The UAF was confirmed
under KASAN by loading a test module that reproduces the exact code
pattern (alloc skb, kfree_skb, then read skb_shinfo(skb)->nr_frags):
BUG: KASAN: slab-use-after-free in ixgbevf_uaf_test_init+0x100/0x1000
Read of size 8 at addr 000000006163ae78 by task insmod/30
freed 208-byte region [000000006163adc0, 000000006163ae90)
QEMU emulates igb (82576) but not ixgbe (82599), and the igbvf VF
driver does not include the VEPA source pruning path, so a full
end-to-end reproduction with emulated hardware was not possible. |
| In the Linux kernel, the following vulnerability has been resolved:
af_unix: Fix UAF read of tail->len in unix_stream_data_wait()
unix_stream_data_wait() does skb_peek_tail(&sk->sk_receive_queue) without
holding any lock that prevents SKBs on that queue from being dequeued and
freed.
This has been the case since commit 79f632c71bea ("unix/stream: fix
peeking with an offset larger than data in queue").
The first consequence of this is that the pointer comparison
`tail != last` can be false even if `last` semantically refers to an
already-freed SKB while `tail` is a new SKB allocated at the same address;
which can cause unix_stream_data_wait() to wrongly keep blocking after new
data has arrived, but only in a weird scenario where a peeking recv() and
a normal recv() on the same socket are racing, which is probably not a
real problem.
But since commit 2b514574f7e8 ("net: af_unix: implement splice for stream
af_unix sockets"), `tail` is actually dereferenced, which can cause UAF in
the following race scenario (where test_setup() runs single-threaded,
and afterwards, test_thread1() and test_thread2() run concurrently in
two threads:
```
static int socks[2];
void test_setup(void) {
socketpair(AF_UNIX, SOCK_STREAM, 0, socks);
send(socks[1], "A", 1, 0);
int peekoff = 1;
setsockopt(socks[0], SOL_SOCKET, SO_PEEK_OFF, &peekoff, sizeof(peekoff));
}
void test_thread1(void) {
char dummy;
recv(socks[0], &dummy, 1, MSG_PEEK);
}
void test_thread2(void) {
char dummy;
recv(socks[0], &dummy, 1, 0);
shutdown(socks[1], SHUT_WR);
}
```
when racing like this:
```
thread1 thread2
unix_stream_read_generic
mutex_lock(&u->iolock)
skb_peek(&sk->sk_receive_queue)
skb_peek_next(skb, &sk->sk_receive_queue)
mutex_unlock(&u->iolock)
unix_stream_read_generic
unix_state_lock(sk)
skb_peek(&sk->sk_receive_queue)
unix_state_unlock(sk)
unix_stream_data_wait
unix_state_lock(sk)
tail = skb_peek_tail(&sk->sk_receive_queue)
spin_lock(&sk->sk_receive_queue.lock)
__skb_unlink(skb, &sk->sk_receive_queue)
spin_unlock(&sk->sk_receive_queue.lock)
consume_skb(skb) [frees the SKB]
`tail != last`: false
`tail`: true
`tail->len != last_len` ***UAF***
```
Fix the UAF by removing the read of tail->len; checking tail->len would
only make sense if SKBs in the receive queue of a UNIX socket could grow,
which can no longer happen.
Kuniyuki explained:
> When commit 869e7c62486e ("net: af_unix: implement stream sendpage
> support") added sendpage() support, data could be appended to the last
> skb in the receiver's queue.
>
> That's why we needed to check if the length of the last skb was changed
> while waiting for new data in unix_stream_data_wait().
>
> However, commit a0dbf5f818f9 ("af_unix: Support MSG_SPLICE_PAGES") and
> commit 57d44a354a43 ("unix: Convert unix_stream_sendpage() to use
> MSG_SPLICE_PAGES") refactored sendmsg(), and now data is always added
> to a new skb.
That means this fix is not suitable for kernels before 6.5. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amd/display: Validate GPIO pin LUT table size before iterating
[Why&How]
The GPIO pin table parsers in get_gpio_i2c_info() and
bios_parser_get_gpio_pin_info() derive an element count from the VBIOS
table_header.structuresize field, then iterate over gpio_pin[] entries.
However, GET_IMAGE() only validates that the table header itself fits
within the BIOS image. If the VBIOS reports a structuresize larger than
the actual mapped data, the loop reads past the end of the BIOS image,
causing an out-of-bounds read.
Fix this by calling bios_get_image() to validate that the full claimed
structuresize is accessible within the BIOS image before entering the
loop in both functions.
(cherry picked from commit ba5e95b43b773ae1bf1f66ee6b31eb774e65afe3) |
| In the Linux kernel, the following vulnerability has been resolved:
irq_work: Fix use-after-free in irq_work_single() on PREEMPT_RT
On PREEMPT_RT, non-HARD irq_work runs in per-CPU kthreads via
run_irq_workd(), so irq_work_sync() uses rcuwait() to wait for BUSY==0.
After irq_work_single() clears BUSY via atomic_cmpxchg(), it still
dereferences @work for irq_work_is_hard() and rcuwait_wake_up().
An irq_work_sync() caller on another CPU that enters after BUSY is cleared
can observe BUSY==0 immediately, return, and free the work before those
accesses complete — causing a use-after-free.
Fix this by wrapping run_irq_workd() in guard(rcu)() so that the entire
irq_work_single() execution is within an RCU read-side critical
section. Then add synchronize_rcu() in irq_work_sync() after
rcuwait_wait_event() to ensure the caller waits for the RCU grace period
before returning, preventing premature frees. |
| In the Linux kernel, the following vulnerability has been resolved:
block: don't overwrite bip_vcnt in bio_integrity_copy_user()
bio_integrity_add_page() already sets bip_vcnt to 1 for the bounce
segment. Overwriting it with nr_vecs breaks bip_vcnt <= bip_max_vcnt
on WRITE (bip_max_vcnt is 1), so the gap-merge checks in block/blk.h
read past the bip_vec[] flex array. On READ the read is in bounds
but lands on a saved user bvec instead of the bounce.
The line was added for split propagation, but bio_integrity_clone()
doesn't copy bip_vcnt and BIP_CLONE_FLAGS excludes BIP_COPY_USER. |
| In the Linux kernel, the following vulnerability has been resolved:
net/smc: reject CHID-0 ACCEPT that matches an empty ism_dev slot
On the SMC-D client, slot 0 of ini->ism_dev[]/ini->ism_chid[] is
reserved for an SMC-Dv1 device. smc_find_ism_v2_device_clnt()
populates V2 entries starting at index 1, so when no V1 device is
selected slot 0 is left in its kzalloc()'ed state with ism_dev[0] ==
NULL and ism_chid[0] == 0.
smc_v2_determine_accepted_chid() then matches the peer's CHID against
the array starting from index 0 using the CHID alone. A malicious
peer replying to a SMC-Dv2-only proposal with d1.chid == 0 matches
the empty slot, ini->ism_selected becomes 0, and the subsequent
ism_dev[0]->lgr_lock dereference in smc_conn_create() faults at
offsetof(struct smcd_dev, lgr_lock) == 0x68:
BUG: KASAN: null-ptr-deref in _raw_spin_lock_bh+0x79/0xe0
Write of size 4 at addr 0000000000000068 by task exploit/144
Call Trace:
_raw_spin_lock_bh
smc_conn_create (net/smc/smc_core.c:1997)
__smc_connect (net/smc/af_smc.c:1447)
smc_connect (net/smc/af_smc.c:1720)
__sys_connect
__x64_sys_connect
do_syscall_64
Require ism_dev[i] to be non-NULL before accepting a CHID match. |
| In the Linux kernel, the following vulnerability has been resolved:
net: mana: Fix TOCTOU double-fetch of hwc_msg_id from DMA buffer
In mana_hwc_rx_event_handler(), resp->response.hwc_msg_id is read from
DMA-coherent memory and bounds-checked, then mana_hwc_handle_resp()
re-reads the same field from the same DMA buffer for test_bit() and
pointer arithmetic.
DMA-coherent memory is mapped uncacheable on x86 and is shared,
unencrypted, in Confidential VMs (SEV-SNP/TDX), so each load goes
directly to host-visible memory. A H/W can modify the value
between the check and the use, bypassing the bounds validation.
Fix this by reading hwc_msg_id exactly once using READ_ONCE() into a
stack-local variable in mana_hwc_rx_event_handler(), and passing the
validated value as a parameter to mana_hwc_handle_resp(). |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: mcast: Fix a possible use-after-free when removing a bridge port
When per-VLAN multicast snooping is enabled, the bridge iterates over
all the bridge ports, disables the per-port multicast context on each
port and enables the per-{port, VLAN} multicast contexts instead. The
reverse happens when per-VLAN multicast snooping is disabled.
When global multicast snooping is enabled, the bridge iterates over all
the bridge ports and enables the per-port multicast context on each
port. The reverse happens when multicast snooping is disabled.
The above scheme can result in a situation where both types of contexts
(per-port and per-{port, VLAN}) are enabled on a single bridge port:
# ip link add name br1 up type bridge mcast_snooping 1 mcast_querier 1 vlan_filtering 1
# ip link add name dummy1 up master br1 type dummy
# ip link set dev br1 type bridge mcast_vlan_snooping 1
# ip link set dev br1 type bridge mcast_snooping 0
# ip link set dev br1 type bridge mcast_snooping 1
This is not intended and it is a problem since the commit cited below.
Prior to this commit, when removing a bridge port,
br_multicast_disable_port() would disable the per-port multicast context
and the per-{port, VLAN} multicast contexts would get disabled when
flushing VLANs.
After this commit, br_multicast_disable_port() only disables the
per-port multicast context if per-VLAN multicast snooping is disabled.
If both types of contexts were enabled on the port when it was removed,
the per-port multicast context would remain enabled when freeing the
bridge port, leading to a use-after-free [1].
Fix by preventing the bridge from enabling / disabling the per-port
multicast contexts when toggling global multicast snooping if per-VLAN
multicast snooping is enabled.
[1]
ODEBUG: free active (active state 0) object: ffff88810f8bda78 object type: timer_list hint: br_ip6_multicast_port_query_expired (net/bridge/br_multicast.c:1927)
WARNING: lib/debugobjects.c:629 at debug_print_object+0x1b1/0x3e0, CPU#5: swapper/5/0
[...]
Call Trace:
<IRQ>
__debug_check_no_obj_freed (lib/debugobjects.c:1116)
kfree (mm/slub.c:2620 mm/slub.c:6250 mm/slub.c:6565)
kobject_cleanup (lib/kobject.c:689)
rcu_do_batch (kernel/rcu/tree.c:2617)
rcu_core (kernel/rcu/tree.c:2869)
handle_softirqs (kernel/softirq.c:622)
__irq_exit_rcu (kernel/softirq.c:656 kernel/softirq.c:496 kernel/softirq.c:735)
irq_exit_rcu (kernel/softirq.c:752)
sysvec_apic_timer_interrupt (arch/x86/kernel/apic/apic.c:1061 (discriminator 47) arch/x86/kernel/apic/apic.c:1061 (discriminator 47))
</IRQ> |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mac80211: bounds-check link_id in ieee80211_ml_epcs
IEEE80211_MLE_STA_EPCS_CONTROL_LINK_ID is 0x000f, so link_id extracted
from a PRIO_ACCESS ML element PER_STA_PROFILE subelement can be 0..15.
sdata->link[] has IEEE80211_MLD_MAX_NUM_LINKS (15) entries (indices 0..14),
making index 15 out-of-bounds.
A connected WiFi 7 AP can trigger this by sending an EPCS Enable Response
action frame with a PER_STA_PROFILE subelement where link_id = 15. The
unsolicited-notification path (dialog_token = 0) is reachable any time
EPCS is already enabled, without any prior client request.
sdata->link[15] reads into the first word of sdata->activate_links_work
(a wiphy_work whose embedded list_head is non-NULL after INIT_LIST_HEAD),
so the NULL check on the result does not catch the invalid access. The
garbage pointer is then passed to ieee80211_sta_wmm_params(), which
dereferences link->sdata and crashes the kernel.
The same class of bug was fixed for ieee80211_ml_reconfiguration() by
commit 162d331d833d ("wifi: mac80211: bounds-check link_id in
ieee80211_ml_reconfiguration"). |
| In the Linux kernel, the following vulnerability has been resolved:
ALSA: seq: Serialize UMP output teardown with event_input
seq_ump_process_event() borrows client->out_rfile.output without
synchronizing with the first-open and last-close transition in
seq_ump_client_open() and seq_ump_client_close().
The last output unuse can therefore drop opened[STR_OUT] to zero and
release the rawmidi file while an in-flight event_input callback is still
inside snd_rawmidi_kernel_write(). That leaves the rawmidi substream
runtime exposed to teardown before the write path has taken its own
buffer reference.
Add a per-client rwlock for the event_input-visible output file. Publish
a newly opened output file under the write side, and hold the read side
from the output lookup through snd_rawmidi_kernel_write(). The last
output close copies and clears the visible output file under the write
side, then drops the lock and releases the saved rawmidi file. Use
IRQ-safe rwlock guards because event_input can also be reached from
atomic sequencer delivery.
The buggy scenario involves two paths, with each column showing the
order within that path:
path A label: event_input path path B label: last unuse path
1. seq_ump_process_event() reads 1. seq_ump_client_close()
client->out_rfile.output. drops opened[STR_OUT] to zero.
2. snd_rawmidi_kernel_write1() 2. snd_rawmidi_kernel_release()
has not yet pinned runtime. closes the output file.
3. The writer continues using 3. close_substream() frees
the borrowed substream. substream->runtime.
This keeps the output substream and runtime alive for the full
event_input write while keeping rawmidi release outside the rwlock.
KASAN reproduced this as a slab-use-after-free in
snd_rawmidi_kernel_write1(), with allocation through
seq_ump_use()/snd_seq_port_connect() and free through
seq_ump_unuse()/snd_seq_port_disconnect().
Validation reproduced this kernel report:
KASAN slab-use-after-free in snd_rawmidi_kernel_write1+0x9d/0x400
RIP: 0033:0x7f5528af837f
Read of size 8
Call trace:
dump_stack_lvl+0x73/0xb0 (?:?)
print_report+0xd1/0x650 (?:?)
srso_alias_return_thunk+0x5/0xfbef5 (?:?)
__virt_addr_valid+0x1a7/0x340 (?:?)
kasan_complete_mode_report_info+0x64/0x200 (?:?)
kasan_report+0xf7/0x130 (?:?)
snd_rawmidi_kernel_write1+0x9d/0x400 (?:?)
__asan_load8+0x82/0xb0 (?:?)
update_stack_state+0x1ef/0x2d0 (?:?)
snd_rawmidi_kernel_write+0x1a/0x20 (?:?)
seq_ump_process_event+0xd4/0x120 (sound/core/seq/seq_ump_client.c:82)
__snd_seq_deliver_single_event+0x8a/0xe0 (?:?)
snd_seq_deliver_from_ump+0x2b2/0xd60 (?:?)
lock_acquire+0x14e/0x2e0 (?:?)
find_held_lock+0x31/0x90 (?:?)
snd_seq_port_use_ptr+0xa6/0xe0 (?:?)
__kasan_check_write+0x18/0x20 (?:?)
do_raw_read_unlock+0x32/0xa0 (?:?)
_raw_read_unlock+0x26/0x50 (?:?)
snd_seq_deliver_single_event+0x45c/0x4b0 (?:?)
snd_seq_deliver_event+0x10d/0x1b0 (?:?)
snd_seq_client_enqueue_event+0x192/0x240 (?:?)
snd_seq_write+0x2cd/0x450 (?:?)
apparmor_file_permission+0x20/0x30 (?:?)
security_file_permission+0x51/0x60 (?:?)
vfs_write+0x1ce/0x850 (?:?)
__fget_files+0x12b/0x220 (?:?)
lock_release+0xc8/0x2a0 (?:?)
__rcu_read_unlock+0x74/0x2d0 (?:?)
__fget_files+0x135/0x220 (?:?)
ksys_write+0x15a/0x180 (?:?)
rcu_is_watching+0x24/0x60 (?:?)
__x64_sys_write+0x46/0x60 (?:?)
x64_sys_call+0x7d/0x20d0 (?:?)
do_syscall_64+0xc1/0x360 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f (?:?) |
| In the Linux kernel, the following vulnerability has been resolved:
net: shaper: rework the VALID marking (again)
Recent commit changed the semantics from NOT_VALID to VALID.
I didn't realize that the flags are not stored atomically
with the entry in XArray. There's still a race of reader
observing a VALID mark for a slot, getting interrupted,
writer replacing the entry with a different one, reader
continuing, fetching the entry which is now a different
pointer than the pointer for which VALID was meant.
The biggest consequence of this is that we may see a UAF
since net_shaper_rollback() assumed that entries without
VALID can be freed without observing RCU.
Looks like the XArray marks are buying us nothing at this
point. Let's convert the code to an explicit valid field.
The smp_load_acquire() / smp_store_release() barriers are
marginally cleaner. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf, skmsg: fix verdict sk_data_ready racing with ktls rx
sk_psock_strp_data_ready() already checks tls_sw_has_ctx_rx() and
defers to psock->saved_data_ready when a TLS RX context is present,
avoiding a conflict with the TLS strparser's ownership of the receive
queue (commit e91de6afa81c, "bpf: Fix running sk_skb program types
with ktls").
sk_psock_verdict_data_ready() has no equivalent guard. When a socket
is inserted into a sockmap (BPF_SK_SKB_VERDICT) before TLS RX is
configured, tls_sw_strparser_arm() saves sk_psock_verdict_data_ready
as rx_ctx->saved_data_ready. On data arrival:
tls_data_ready -> tls_strp_data_ready -> tls_rx_msg_ready
-> saved_data_ready() = sk_psock_verdict_data_ready()
-> tcp_read_skb() drains sk_receive_queue via __skb_unlink()
without calling tcp_eat_skb(), so copied_seq is not advanced.
tls_strp_msg_load() then finds tcp_inq() >= full_len (stale), calls
tcp_recv_skb() on the now-empty queue, hits WARN_ON_ONCE(!first), and
returns with rx_ctx->strp.anchor.frag_list pointing at a psock-owned
(potentially freed) skb. tls_decrypt_sg() subsequently walks that
frag_list: use-after-free.
Apply the same fix as sk_psock_strp_data_ready(): if a TLS RX context
is present, call psock->saved_data_ready (sock_def_readable) to wake
recv() waiters and return immediately, leaving the receive queue
untouched. TLS retains sole ownership of the queue and decrypts the
record normally through tls_sw_recvmsg(). |
| In the Linux kernel, the following vulnerability has been resolved:
blk-mq: pop cached request if it is usable
When submitting a bio to blk-mq, if the task should sleep after peeking
a cached request, but before it pops it, the plug flushes and calls
blk_mq_free_plug_rqs, freeing the cached_rqs. This creates a
use-after-free bug. Fix this by popping the cached request before any
possible blocking calls if it is suitable for use.
Popping this request first holds a queue reference, so avoid any
serialization races with queue freezes and can safely proceed with
dispatching that request to the driver. This potentially increases a
timing window from when a driver wants to freeze its queue to when
requests stop being dispatched. That scenario is off the fast path
though, and drivers need to appropriately handle requests during a
freeze request anyway.
The downside is the popped element needs to be individually freed when
we performed a bio plug merge. The cached request would have had to be
freed later anyway, but this patch does it inline with building the plug
list instead of after flushing it. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: synproxy: refresh tcphdr after skb_ensure_writable
synproxy_tstamp_adjust() rewrites the TCP timestamp option in place
and then patches the TCP checksum via inet_proto_csum_replace4() on
the caller-supplied tcphdr pointer. Both ipv4_synproxy_hook() and
ipv6_synproxy_hook() obtain that pointer with skb_header_pointer()
before calling in, so it may either alias skb->head directly or
point at the caller's on-stack _tcph buffer.
Between obtaining the pointer and using it, the function calls
skb_ensure_writable(skb, optend), which on a cloned or non-linear
skb invokes pskb_expand_head() and frees the old skb->head. After
that point the cached th is stale:
caller (ipv[46]_synproxy_hook)
th = skb_header_pointer(skb, ..., &_tcph)
synproxy_tstamp_adjust(skb, protoff, th, ...)
skb_ensure_writable(skb, optend)
pskb_expand_head() /* kfree(old skb->head) */
...
inet_proto_csum_replace4(&th->check, ...)
/* writes into freed head, or
into the caller's stack copy
leaving the on-wire checksum
stale */
The option bytes are written through skb->data and are fine; only
the checksum update goes through th and so lands in the wrong
place. The result is either a write into freed slab memory or a
packet leaving with a checksum that does not match its payload.
Fix by re-deriving th from skb->data + protoff immediately after
skb_ensure_writable() succeeds, so the subsequent checksum update
targets the linear, writable header. |
| In the Linux kernel, the following vulnerability has been resolved:
ipv4: free net->ipv4.sysctl_local_reserved_ports after unregister_net_sysctl_table()
ipv4_sysctl_exit_net() is currently freeing net->ipv4.sysctl_local_reserved_ports
too soon.
Only after unregister_net_sysctl_table() we can be sure no threads can possibly
use the sysctls, including /proc/sys/net/ipv4/ip_local_reserved_ports. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: fix potential OOB access in supervision frame handling
Ensure the entire TLV header is linearized before access by adding
sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this,
a truncated frame could cause an out-of-bounds access. |
