| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/debug: Fix NULL pointer dereference in debug_info_copy()
When debug_register_static() fails, it clears areas, active_pages and
active_entries but leaves the area bounds unchanged. Copying such an
area, either by opening its view file or via debug_dump(), makes
debug_info_copy() dereference the NULL pointers.
Skip the copy loop when the source has no areas. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix bpf_sock context code generation
Currently, the ctx access code reads the rx_queue_mapping
field with either a 4-byte or 2-byte load. The rest of the bits
in the register are marked known zero by the verifier. However,
the emitted ctx access code places in the register on certain
the special value (-1) using BPF_MOV_IMM64, which gets sign-extended
to turn on all the bits in the register. By shifting this value right,
the program ends up with a value at runtime above what the verifier
assumes is possible.
Fix this by ensuring the read value is as wide as the assumed size.
Use MOV32 instructions instead of MOV64 instructions to keep
the upper bits zero as assumed by the verifier. Also properly report
the size of the destination variable (the bpf_sock field, 4 bytes) instead
of the source (the socket field, 2 bytes). |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: pn533: fix OOB read in pn533_acr122_is_rx_frame_valid()
frame->ccid.datalen is read directly from the USB response frame
and used, unchecked, as an index into frame->data[]. A malicious or
malfunctioning device can set this field to an arbitrary value,
causing the driver to read far outside the received buffer.
Bound ccid.datalen against the maximum possible ACR122 frame size
before using it. This replaces the existing datalen == 0 check,
since datalen < 2 already covers that case and additionally
rejects datalen == 1, which would still underflow the
"datalen - 2" offset used below. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix immediate JMP JEQ/JNE on MIPS32
An addu instruction was emitted instead of addiu, causing the immediate
value 1 to be interpreted as register $at. This made the comparison
result invalid when the immediate operand was negative. Note that $at
is mapped to BPF_REG_AX, which is used for constant blinding.
Fix the instruction to use the immediate form.
Found with test_bpf on MIPS32r1 emulated by QEMU. |
| In the Linux kernel, the following vulnerability has been resolved:
net: stmmac: clear stale buf->page after recycling on skb build failure
In stmmac_rx(), when napi_build_skb() fails the descriptor page is
recycled back to the page pool with page_pool_recycle_direct(), but
buf->page is left pointing at the recycled page, unlike every other
consumption site in the function which clears the pointer after handing
the page away.
With the stale pointer stmmac_rx_refill() skips the replacement
allocation and programs the already-recycled page back into the RX
descriptor.
Clear buf->page on the napi_build_skb() failure path to keep the buffer
lifecycle consistent with the other consumption sites. |
| In the Linux kernel, the following vulnerability has been resolved:
net: ipv6: keep room for the mac header in dst_dev_overhead()
The seg6, ioam6 and rpl lwtunnels size their skb_cow_head() request as
the length they are about to push plus dst_dev_overhead(), then push the
new headers and rebuild the mac header below them with
skb_mac_header_rebuild(). That rebuild needs skb->mac_len of headroom,
but dst_dev_overhead() leaves LL_RESERVED_SPACE() of the egress device,
16 bytes for plain Ethernet.
Where the mac header is longer than that, as it is on ingress through a
VLAN device with reorder_hdr off, the rebuild runs out of room:
skb_set_mac_header(skb, -skb->mac_len) computes a negative offset,
stores it unchecked in the u16 skb->mac_header, and the memmove that
follows writes skb->mac_len bytes about 64 KB past skb->head.
Forwarding plain ping6 traffic through such a device reproduces it on
all five seg6 encapsulation modes and on the rpl and ioam6 inline paths;
skb->mac_header comes back as 65534 on a 704-byte head.
Return the larger of the two. The helper already returns skb->mac_len
when it has no dst, so this only makes the other branch agree, and it
covers every caller rather than each call site in turn. |
| In the Linux kernel, the following vulnerability has been resolved:
net/rds: size a connection's path set by the transport it ends up with
__rds_conn_create() computes npaths from the caller's transport before
it decides whether a connection to one of the host's own addresses is
to be handled by the loopback transport instead. That substitution is
what an RDS/TCP socket sending to a local address gets, and after it
the path init loop still runs for the TCP transport's RDS_MPATH_WORKERS
paths and allocates an ordered workqueue for each, while
rds_loop_conn_alloc() only ever provides transport data for path 0.
rds_conn_destroy() sizes its teardown from c_trans, by then the
loopback transport, so it visits path 0 only - and
rds_conn_path_destroy() would skip the other paths anyway, since it
returns before destroy_workqueue() for a path without transport data.
kfree(c_path) then drops the last pointers to seven workqueues. That
repeats for every such connection, on every netns teardown or module
unload, and every distinct local destination address is a separate
connection.
Recompute npaths once the transport is final, so that creation and
destruction agree on the set of paths. The c_path array stays sized
for the caller's transport; the unused entries are freed with it. |
| In the Linux kernel, the following vulnerability has been resolved:
net: flush skb_defer_nodes in dev_cpu_dead()
When a CPU goes offline, dev_cpu_dead() drains its softnet queues
(completion_queue, output_queue, poll_list, process_queue, and
input_pkt_queue), but leaves net_hotdata.skb_defer_nodes untouched.
If oldcpu goes offline while holding pending skbs in its
skb_defer_nodes lists (e.g. below the sysctl_skb_defer_max >> 1 IPI
threshold, or if the IPI races with CPU teardown), those skbs remain
stranded until oldcpu is brought back online. If any of these skbs
hold page_pool fragments, page_pool_destroy() will stall indefinitely
waiting for inflight pages to be returned when a netdev or driver is
torn down while oldcpu is offline.
Additionally, if smp_call_function_single_async() fails in
kick_defer_list_purge() because the target CPU went offline, reset
defer_ipi_scheduled to 0 so future IPI kicks are not blocked when the
CPU comes back online.
Also, if oldcpu was the last online CPU on its NUMA node, drain that
node's slot across all CPUs so no skbs deferred from that node remain
stranded on idle remote CPUs (or if the node itself is subsequently
offlined).
Finally, in skb_attempt_defer_free(), re-check cpu_online(cpu) and
whether the caller migrated CPUs after llist_add(), flushing the node
list if so, to close the preemption TOCTOU race against CPU/node
teardown. |
| In the Linux kernel, the following vulnerability has been resolved:
gve: DQO: fix header length used by gve_can_send_tso() for UDP GSO
gve_can_send_tso() computes how many buffers each segment of a GSO
packet would span, and for this it needs the length of the headers
that the device replicates in front of every segment.
It unconditionally uses skb_tcp_all_headers(), which reads the doff
field of the TCP header. SKB_GSO_UDP_L4 packets have no TCP header:
tcp_hdrlen() then reads one byte of the UDP payload, and header_len
can be anything in [0, 60] instead of the transport offset plus the
eight bytes of the UDP header that gve_prep_tso() programs into the
TSO context descriptor.
A wrong header length shifts all the segment boundaries computed in
the loop, so the number of buffers per segment can be over or under
estimated. In the first case, GSO is needlessly disabled for this
packet by gve_features_check_dqo() and the stack has to segment it.
In the second case, the driver hands the device a packet whose
segments span more than GVE_TX_MAX_DATA_DESCS buffers.
Use the UDP header length for SKB_GSO_UDP_L4 packets, matching what
gve_prep_tso() does. |
| In the Linux kernel, the following vulnerability has been resolved:
perf/core: Fill branch entries with a single assignment
perf_clear_branch_entry_bitfields() clears the bitfields of struct
perf_branch_entry one by one and leaves from/to alone, since callers
overwrite those straight away. The list has to be kept in sync with the
struct by hand and has already fallen behind: new_type and priv were
added to perf_branch_entry and never added here.
Only BRBE writes those two, and neither for every record.
brbe_set_perf_entry_type() leaves new_type alone for a branch type it
does not recognise, and priv is not set for source-only records.
arm_pmuv3.c allocates the per-CPU branch stack with kmalloc(), so such a
record reaches userspace with whatever the slot held: uninitialised
kmalloc() data on the first pass over the buffer, the previous record's
values after that. Nothing under arch/x86/events/ writes either field,
so only arm64 is affected.
Assign the whole entry at each site instead. Everything not named is
then zero, and there is no list to keep in sync. The bitfields add up to
exactly 64 bits, so the struct has no padding to leave undefined.
perf_clear_branch_entry_bitfields() has no callers left, so remove it.
perf_entry_from_brbe_regset() assigns an empty literal instead, since it
fills from/to conditionally. PERF_BR_SPEC_NA is 0, so dropping the
explicit spec assignment changes nothing. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: fs/xattr: don't assume the inode is locked in path_unlink/path_rmdir
bpf_lsm_has_d_inode_locked() makes the verifier rewrite
bpf_[set|remove]_dentry_xattr() to the _locked variants, which assume
that the caller already holds the inode's i_rwsem. The path_unlink and
path_rmdir hooks are listed, but security_path_unlink() and
security_path_rmdir() run before vfs_unlink()/vfs_rmdir() take the
victim inode's i_rwsem, so a sleepable BPF LSM program attached to
either hook mutates the victim's xattrs without the lock held.
Drop the two path hooks from d_inode_locked_hooks so that the verifier
keeps the locking bpf_[set|remove]_dentry_xattr() variants, which take
the lock themselves. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Terminate the fgraph_data list when the reservation is not filled
fprobe_fgraph_entry() reserves shadow stack space for every fprobe with
an exit handler, but only fills it for those whose entry handler returns
0. fgraph_reserve_data() does not clear the area, so fprobe_return()
parses the unused tail as headers left over from an earlier call, and an
exit handler can run twice or despite its entry handler asking to skip
it.
Write a zero word after the last entry to terminate the walk. A zeroed
slot does not decode to a NULL fprobe on the arches that encode the
header into one unsigned long, since arch_decode_fprobe_header_fp() ORs
in FPROBE_HEADER_MSB_PATTERN, so make read_fprobe_header() return NULL
for a zeroed slot. |
| In the Linux kernel, the following vulnerability has been resolved:
workqueue: Fix NULL current_pwq deref in flush dependency check
check_flush_dependency() uses current_wq_worker() to determine whether
the caller is a workqueue worker and then dereferences worker->current_pwq
to test whether the current workqueue is WQ_MEM_RECLAIM.
current_wq_worker() only means that %current has PF_WQ_WORKER set. A
kworker can reach check_flush_dependency() while it is not executing a
work item. One such path is worker_thread() acting as the pool manager,
where create_worker() does GFP_KERNEL allocation and the allocation path
invokes the OOM notifier. In that state worker->current_pwq is NULL
because current_pwq is set only by process_one_work() and cleared again
after the work function returns.
[ 416.760634][ T375] Call trace:
[ 416.760638][ T375] check_flush_dependency+0x80/0x120 (P)
[ 416.760648][ T375] __flush_work+0x98/0x224
[ 416.760657][ T375] flush_work+0x30/0x44
[ 416.760665][ T375] ...
[ 416.760710][ T375] blocking_notifier_call_chain+0x58/0xa0
[ 416.760719][ T375] out_of_memory+0xb4/0x458
[ 416.760730][ T375] __alloc_pages_may_oom+0x11c/0x1a8
[ 416.760739][ T375] __alloc_pages_slowpath+0x314/0x46c
[ 416.760746][ T375] __alloc_frozen_pages_noprof+0x110/0x1a4
[ 416.760753][ T375] new_slab+0x12c/0x484
[ 416.760759][ T375] ___slab_alloc+0x7a8/0xc7c
[ 416.760765][ T375] __slab_alloc+0x74/0xd8
[ 416.760772][ T375] __kmalloc_cache_node_noprof+0x2ac/0x304
[ 416.760779][ T375] alloc_worker+0x28/0x60
[ 416.760785][ T375] create_worker+0x4c/0x20c
[ 416.760790][ T375] worker_thread+0xe8/0x2b8
[ 416.760796][ T375] kthread+0x1a8/0x200
[ 416.760805][ T375] ret_from_fork+0x10/0x20
Guard the WQ_MEM_RECLAIM-worker warning with worker->current_pwq. If the
kworker is not currently executing a work item, there is no current
workqueue to diagnose with that warning. The PF_MEMALLOC warning is left
unchanged so explicit reclaim context flushing a !WQ_MEM_RECLAIM target
is still reported. |
| In the Linux kernel, the following vulnerability has been resolved:
fsl/fman: Fix clk reference leak in read_dts_node()
of_clk_get() returns a clock with its reference count incremented, but
read_dts_node() only uses it to read the rate and never calls clk_put().
The clock is not stored anywhere, so the reference cannot be released
later either.
Release the clock once its rate has been read, which also covers the
error path taken when the rate is zero. |
| In the Linux kernel, the following vulnerability has been resolved:
ipe: protect the dm-verity root hash with RCU
ipe_bdev_setintegrity() frees the old root hash when dm-verity publishes
a new one on ->preresume, while policy evaluation can still be
dereferencing it.
Protect the root hash with RCU. The evaluation path already runs under
rcu_read_lock().
[FW: remove model name according to latest guideline] |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: do not let ipv6_find_hdr() return an offset past the packet end
ipv6_find_hdr() walks the extension header chain, skipping each header by
the length that header itself declares. ipv6_optlen() returns up to 2048,
and the skip is never checked against skb->len, so the offset stored in
*offset can point past the end of the packet.
openvswitch installs that offset as the transport header, and
update_ipv6_checksum() then reads and writes the transport checksum field
out of bounds:
BUG: KASAN: slab-use-after-free in inet_proto_csum_replace16+0x445/0x470
Read of size 2 at addr ffff88810b754b06 by task ovs_ipv6_oob/629
CPU: 4 UID: 1000 PID: 629 Comm: ovs_ipv6_oob Tainted: G N 7.3.0-rc3+ #348
Call Trace:
inet_proto_csum_replace16+0x445/0x470
set_ipv6_addr+0x3dd/0x460
do_execute_actions+0x6a3d/0x7c40
ovs_execute_actions+0xfd/0x480
ovs_packet_cmd_execute+0xc38/0xf20
genl_rcv_msg+0x59e/0x870
netlink_rcv_skb+0x18b/0x450
genl_rcv+0x2d/0x40
netlink_unicast+0x6bc/0xa20
The buggy address belongs to the object at ffff88810b754980
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 390 bytes inside of
freed 704-byte region [ffff88810b754980, ffff88810b754c40)
Other callers use that offset too, so bound it here rather than in one
caller.
Reject a header whose declared length does not fit in the packet.
ipv6_find_hdr() already fails with -EBADMSG on a malformed chain, so this
adds no new failure mode. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/imagination: Propagate map failures correctly from pvr_mmu_map_sgl()
Map failure from pvr_mmu_map_sgl() interface was not returned correctly
to pvr_mmu_map() interface. This resulted in pvr_mmu_map() interface to
continue instead of returning an error to caller.
Fix it by returning a proper error code from pvr_mmu_map_sgl() interface.
Call stack for crash:
[ 1179.286237] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 1179.295067] Mem abort info:
[ 1179.297877] ESR = 0x0000000096000004
[ 1179.301656] EC = 0x25: DABT (current EL), IL = 32 bits
[ 1179.306987] SET = 0, FnV = 0
[ 1179.310048] EA = 0, S1PTW = 0
[ 1179.313198] FSC = 0x04: level 0 translation fault
[ 1179.318096] Data abort info:
[ 1179.320993] ISV = 0, ISS = 0x00000004, ISS2 = 0x00000000
[ 1179.326483] CM = 0, WnR = 0, TnD = 0, TagAccess = 0
[ 1179.331546] GCS = 0, Overlay = 0, DirtyBit = 0, Xs = 0
[ 1179.336895] user pgtable: 4k pages, 48-bit VAs, pgdp=000000009822a000
[ 1179.343402] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000
[ 1179.350243] Internal error: Oops: 0000000096000004 [#2] SMP
[ 1179.355908] Modules linked in: powervr gpu_sched drm_shmem_helper drm_gpuvm drm_exec xhci_plat_hcd xhci_hcd dwc3 usbcore usb_common snd_soc_simple_card snd_soc_simple_card_utils dwc3_am62 at24 sa2ul sha512 libsha512 sha256 authenc sch_fq_codel fuse dm_mod ipv6
[ 1179.378992] CPU: 1 UID: 1000 PID: 680 Comm: deqp-vk Tainted: G D 6.17.0 #1 PREEMPT
[ 1179.388120] Tainted: [D]=DIE
[ 1179.390994] Hardware name: Texas Instruments AM625 SK (DT)
[ 1179.396467] pstate: 00000005 (nzcv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ 1179.403415] pc : pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr]
[ 1179.410140] lr : pvr_mmu_op_context_unmap_curr_page+0x58/0x134 [powervr]
[ 1179.416848] sp : ffff8000839ab8c0
[ 1179.420153] x29: ffff8000839ab8c0 x28: 0000000000000001 x27: 000000008f386000
[ 1179.427283] x26: ffff000016d1df98 x25: 0000000000247000 x24: 00000000000001e6
[ 1179.434413] x23: 0000000000000002 x22: 000000000000ffff x21: 0000000000000247
[ 1179.441540] x20: 0000000000000245 x19: ffff000016d1df60 x18: 0000000000000002
[ 1179.448668] x17: 0000000000000000 x16: 0000000000000000 x15: 0000000000000001
[ 1179.455793] x14: 0000000000060810 x13: ffff80007fffffff x12: ffff000004190480
[ 1179.462921] x11: ffff8000853f7000 x10: ffff8000811ae000 x9 : ffff0000041900b8
[ 1179.470051] x8 : 0000000000000000 x7 : 00000000990c4001 x6 : 0000000000000007
[ 1179.477177] x5 : ffff000016d1df60 x4 : 0000000000000000 x3 : ffff00000a7d8000
[ 1179.484306] x2 : 00000000000001ff x1 : 0000000000000000 x0 : 0000000000000000
[ 1179.491433] Call trace:
[ 1179.493872] pvr_mmu_op_context_unmap_curr_page+0x6c/0x134 [powervr] (P)
[ 1179.500582] pvr_mmu_map+0x31c/0x388 [powervr]
[ 1179.505027] pvr_vm_gpuva_map+0x40/0x88 [powervr]
[ 1179.509732] __drm_gpuvm_sm_map+0x250/0x44c [drm_gpuvm]
[ 1179.514952] drm_gpuvm_sm_map+0x48/0x5c [drm_gpuvm]
[ 1179.519822] pvr_vm_bind_op_exec+0x64/0x70 [powervr]
[ 1179.524785] pvr_vm_map+0x1f8/0x2a8 [powervr]
[ 1179.529142] pvr_ioctl_vm_map+0x12c/0x188 [powervr]
[ 1179.534018] drm_ioctl_kernel+0xb8/0x128
[ 1179.537941] drm_ioctl+0x21c/0x4ec
[ 1179.541337] __arm64_sys_ioctl+0xac/0x108
[ 1179.545344] invoke_syscall+0x44/0x100
[ 1179.549091] el0_svc_common.constprop.0+0x40/0xe0
[ 1179.553790] do_el0_svc+0x1c/0x28
[ 1179.557106] el0_svc+0x34/0xf0
[ 1179.560159] el0t_64_sync_handler+0xd0/0xe4
[ 1179.564334] el0t_64_sync+0x198/0x19c
[ 1179.567996] Code: 54000300 35000360 f9402261 79409a62 (f9400421)
[ 1179.574081] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/i915: fix incorrect RCU teardown order
i915_gem_busy_ioctl uses dma_resv_for_each_fence_unlocked() to iterate
over the fences in an GEM object without holding a reference but only
the RCU read side lock.
What can happen here is that the GEM object is destroyed concurrently
while i915_gem_busy_ioctl is still running. This won't free the GEM
objects memory, but still drops all the dma_fence references.
Now when dma_resv_for_each_fence_unlocked() sees a destroyed dma_fence it
assumes that a new fence list was installed and re-starts the loop.
But in the case of a destroyed GEM object a new fence list is never
installed, only the old one freed and therefore the iteration never
finishes resulting in an endless loop.
The solution is to drop the fence references only after the RCU grace
period.
The fixes tag is not necessary the patch introducing the problem, but the
one making it so worse that we need to address it.
This problem was pointed out by Sashiko-bot.
(cherry picked from commit 5113479556025093bf8133bb2dcaa33be2d50921) |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/uvmm: fix UAF in nouveau_uvmm_sm when BO is in TTM_PL_SYSTEM
nouveau_uvmm_sm() calls op_map(), which passes bo->resource through
nouveau_mem() to nouveau_uvma_map(). nouveau_uvmm_vmm_map() then reads
mem->mem.type.
But this is only valid when bo->resource is backed by struct nouveau_mem,
as is the case for VRAM and TT resources. If the BO is left in
TTM_PL_SYSTEM, bo->resource is only a struct ttm_resource. Treating it
as struct nouveau_mem makes the mem->mem.type read past the end of the
resource, causing a KASAN: slab-use-after-free Read in nouveau_uvmm_sm
report:
BUG: KASAN: slab-use-after-free in nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
BUG: KASAN: slab-use-after-free in op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
BUG: KASAN: slab-use-after-free in nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
Read of size 1 at addr ffff888127d3e3a0 by task kworker/0:1/11
CPU: 0 UID: 0 PID: 11 Comm: kworker/0:1 Not tainted 7.2.0 #5 PREEMPT(lazy)
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
Workqueue: nouveau_sched_wq_2224 drm_sched_run_job_work
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x95/0xe0 lib/dump_stack.c:120
print_address_description mm/kasan/report.c:378 [inline]
print_report+0xcb/0x5a0 mm/kasan/report.c:482
kasan_report+0xca/0x100 mm/kasan/report.c:595
nouveau_uvmm_vmm_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:152 [inline]
nouveau_uvma_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:199 [inline]
op_map drivers/gpu/drm/nouveau/nouveau_uvmm.c:849 [inline]
nouveau_uvmm_sm.constprop.0+0x6ab/0x900 drivers/gpu/drm/nouveau/nouveau_uvmm.c:903
nouveau_uvmm_sm_unmap drivers/gpu/drm/nouveau/nouveau_uvmm.c:932 [inline]
nouveau_uvmm_bind_job_run+0xd6/0x250 drivers/gpu/drm/nouveau/nouveau_uvmm.c:1532
nouveau_job_run drivers/gpu/drm/nouveau/nouveau_sched.c:350 [inline]
nouveau_sched_run_job+0x62/0xd0 drivers/gpu/drm/nouveau/nouveau_sched.c:364
drm_sched_run_job_work+0x356/0xa10 drivers/gpu/drm/scheduler/sched_main.c:1061
process_one_work+0x8a5/0x1900 kernel/workqueue.c:3322
process_scheduled_works kernel/workqueue.c:3405 [inline]
worker_thread+0x5dd/0xd80 kernel/workqueue.c:3486
kthread+0x31d/0x420 kernel/kthread.c:436
ret_from_fork+0x662/0x940 arch/x86/kernel/process.c:158
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
</TASK>
Allocated by task 2224 on cpu 0 at 66.550027s:
kasan_save_stack+0x24/0x50 mm/kasan/common.c:57
kasan_save_track+0x17/0x60 mm/kasan/common.c:78
poison_kmalloc_redzone mm/kasan/common.c:398 [inline]
__kasan_kmalloc+0xaa/0xb0 mm/kasan/common.c:415
kasan_kmalloc include/linux/kasan.h:263 [inline]
__do_kmalloc_node mm/slub.c:5334 [inline]
__kmalloc_noprof+0x304/0x7c0 mm/slub.c:5359
_kmalloc_noprof include/linux/slab.h:992 [inline]
dma_resv_list_alloc+0x27/0x90 drivers/dma-buf/dma-resv.c:106
dma_resv_reserve_fences+0x60e/0xa30 drivers/dma-buf/dma-resv.c:205
ttm_bo_alloc_resource+0x12c/0xbd0 drivers/gpu/drm/ttm/ttm_bo.c:721
ttm_bo_validate+0x1bc/0x4a0 drivers/gpu/drm/ttm/ttm_bo.c:856
ttm_bo_init_reserved+0x2c3/0x570 drivers/gpu/drm/ttm/ttm_bo.c:970
nouveau_bo_init+0x159/0x2c0 drivers/gpu/drm/nouveau/nouveau_bo.c:359
nouveau_gem_new+0x234/0x5f0 drivers/gpu/drm/nouveau/nouveau_gem.c:272
nouveau_gem_ioctl_new+0x1eb/0x420 drivers/gpu/drm/nouveau/nouveau_gem.c:352
drm_ioctl_kernel+0x192/0x350 drivers/gpu/drm/drm_ioctl.c:817
drm_ioctl+0x4f8/0xb40 drivers/gpu/drm/drm_ioctl.c:914
nouveau_drm_ioctl+0xea/0x2c0 drivers/gpu/drm/nouveau/nouveau_drm.c:1338
vfs_ioctl fs/ioctl.c:51 [inline]
__do_sys_ioctl fs/ioctl.c:597 [inline]
__se_sys_ioctl fs/ioctl.c:583 [inline]
__x64_sys_ioctl+0x180/0x1d0 fs/ioctl.c:583
do_syscall_x64 ar
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau: Fix bridge reference leak in nv1a_ram_new()
pci_get_domain_bus_and_slot() takes a reference to the PCI device,
which is never released once the memory size has been read from its
config space. Drop the reference before returning. |
