| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A flaw was found in tftp-hpa. When the `in.tftpd` remap engine processes an inverse remap rule that also aborts with a non-empty custom error message, it can pass invalid match offsets to the `genmatchstring()` function. This leads to out-of-bounds read/write operations. A remote, unauthenticated attacker can exploit this vulnerability by sending a specially crafted request, causing the daemon to crash and resulting in a denial of service. |
| In the Linux kernel, the following vulnerability has been resolved:
gpio: aggregator: fix a potential use-after-free
On error we free aggr->lookups->dev_id before removing the entry from
the lookup table. If a concurrent thread calls gpiod_find() before we
remove the entry, it could iterate over the list and call
gpiod_match_lookup_table() which unconditionally dereferences dev_id
when calling strcmp(). Reverse the order of cleanup. |
| In the Linux kernel, the following vulnerability has been resolved:
Input: usbtouchscreen - clamp NEXIO data_len/x_len to URB buffer size
nexio_read_data() pulls data_len and x_len from a packed __be16 header
in the device's interrupt packet and then walks packet->data[0..x_len)
and packet->data[x_len..data_len) comparing each byte against a
threshold.
Both fields are 16-bit on the wire (max 65535). The existing
adjustments shave at most 0x100 / 0x80 off, so the loop bound can still
reach roughly 0xfeff. The URB transfer buffer for NEXIO is rept_size
(1024) bytes from usb_alloc_coherent(), with the first 7 occupied by the
packed header — so packet->data[] has 1017 valid bytes. read_data()
callbacks are not given urb->actual_length, and nothing else bounds the
walk.
A device that lies about its length can get a ~64 KiB out-of-bounds read
past the coherent DMA allocation. The first index whose byte exceeds
NEXIO_THRESHOLD lands in begin_x / begin_y and from there into the
reported touch coordinates, so adjacent kernel memory contents leak to
userspace as ABS_X / ABS_Y events. Far enough out, the read can also
hit an unmapped page and fault.
Fix this all by clamping data_len to the buffer's data[] capacity and
x_len to data_len. |
| The Gitea web route for deleting tags (`POST /{owner}/{repo}/tags/delete`) requires only write access to the Code unit, but shares its handler with release deletion and did not check that the target was a plain tag. A collaborator with Code write access and without Releases write access could permanently delete published releases of that repository, including their attachments. Protected tag rules covering the release tag still blocked the deletion. |
| Backstage is an open framework for building developer portals. Prior to 3.3.1, 3.4.1, 4.0.3 and 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by improper task state validation in scaffolder backend. An authenticated user with permission to create and access Scaffolder tasks may, under specific timing and deployment conditions, affect files accessible to the Backstage backend. If backend application files are writable, the confidentiality, integrity, and availability of the backend may be compromised. This issue is fixed in versions 3.3.1, 3.4.1, 4.0.3 and 4.1.0. |
| Backstage is an open framework for building developer portals. Prior to 3.3.1, 3.4.1, 4.0.3 and 4.1.0, the @backstage/plugin-scaffolder-backend package is affected by scaffolder action input authorization bypass. An authenticated user with access to affected Scaffolder templates could bypass configured action restrictions. Depending on integration credentials, this could grant unauthorized access to repositories and related source-control resources. This issue is fixed in versions 3.3.1, 3.4.1, 4.0.3 and 4.1.0. |
| Pydantic AI is a Python agent framework for building applications and workflows with Generative AI. From 2.10.0 until 2.53.0, streamed requests made through ConcurrencyLimitedModel or limit_model_concurrency can retain shared concurrency slots because anyio.CapacityLimiter associates an acquired slot with the borrowing task while streaming cleanup can run in a different task. Early stream termination, cancellation, consumer exceptions, or complete stream_text() consumption with debounce_by=0.1 can therefore leave capacity occupied, eventually preventing later requests that share the long-lived limiter from proceeding and causing a denial of service. Agent-level max_concurrency and non-streaming model requests are not affected. This issue is fixed in version 2.53.0. |
| Nginx UI is a web user interface for the Nginx web server. Prior to 2.4.1, the HTTP configuration mutation routes require RequireSecureSession, but /mcp and /mcp_message require only ordinary authentication before exposing nginx_config_add and nginx_config_modify. An OTP-enabled user with a normal JWT but no valid X-Secure-Session-ID can therefore create or modify Nginx configuration and trigger reload behavior through MCP, bypassing the intended step-up control. This issue is fixed in version 2.4.1. |
| A vulnerability has been found in girishsaraf Online-Appointment-Booking-System up to f427b4757128ca253d33d0cc4e87bbb9c999a4d5. Affected is an unknown function of the file Admin/deleteclinic.php of the component Admin CRUD Endpoint. The manipulation of the argument cid/did leads to sql injection. Remote exploitation of the attack is possible. The exploit has been disclosed to the public and may be used. This product follows a rolling release approach for continuous delivery, so version details for affected or updated releases are not provided. The project was informed of the problem early through an issue report but has not responded yet. |
| Unsigned integer underflow in wstrncat() in src/port.c in wolfSSL wolfSSH from v1.4.11 through v1.5.0 on non-Windows platforms allows an authenticated remote attacker to write one out-of-bounds null byte past the end of a stack buffer by sending a crafted SFTP path. wolfSSH_RealPath() in src/ssh.c appends each path component with a remaining-size bound (outSz - curSz) rather than the full destination size, so once the accumulated path reaches half the output buffer the size_t computation n - strlen(s1) - 1 wraps to near SIZE_MAX. The strncat() call is then effectively unbounded and copies the whole component; when that component exactly fills the remainder of the buffer, its terminating null is written one byte past the end. The caller's own length check keeps the copied data inside the buffer, so the overflow is limited to that single null byte, which may corrupt an adjacent stack value and crash the process. Applications that call the public wolfSSH_RealPath() with an output buffer smaller than the input path are additionally exposed to an unbounded copy, because the word32 expression outSz - segSz in that length check also wraps. |
| Backstage is an open framework for building developer portals. Prior to 1.14.6, the @backstage/plugin-techdocs-node package is affected by remote code execution via crafted markdown_extensions in techdocs mkdocs.yml. An authenticated user who can register catalog entities can provide a crafted mkdocs.yml causing arbitrary OS command execution on the TechDocs build host when the docs are built. This issue is fixed in versions 1.14.6 and 1.15.4. |
| Backstage is an open framework for building developer portals. Prior to 1.14.6, the @backstage/plugin-techdocs-node package is affected by configuration bypass in techdocs mkdocs.yml sanitization. Insufficient validation of MkDocs configuration during TechDocs generation could allow an authenticated user who can register or modify documentation sources to execute arbitrary commands in the build environment. Impact is limited to resources accessible to the TechDocs backend or build container. This issue is fixed in versions 1.14.6 and 1.15.4. |
| Backstage is an open framework for building developer portals. Prior to 1.14.8, 1.15.6, and 2.0.1, the @backstage/plugin-techdocs-node package improperly validated mapping-style markdown_extensions configuration. An authenticated attacker who can register or influence an SCM-backed documentation source may bypass TechDocs sanitization and cause Python objects to be imported and instantiated in the generator runtime, leading to arbitrary code execution. Earlier fixes in versions 1.14.6 and 1.15.4 did not fully address the supported mapping representation of markdown_extensions. Impact is greatest when documentation generation runs with backend credentials, filesystem access, or internal network access. This issue is fixed in versions 1.14.8, 1.15.6, and 2.0.1. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.1.0 to 2.11.0, Rows.Columns accepts a look-ahead row number above TotalRows without applying the limit enforced by Rows.Next. File.GetRows relies on Rows.Next and Rows.Columns, but Rows.Columns consumes the row r attribute without the limit check in Rows.Next. When a crafted worksheet places an oversized row number after an ordinary valid row and the application calls GetRows or iterates Rows, the iterator advances through every missing row number instead of rejecting the workbook, allowing an attacker to consume a CPU core for an attacker-controlled duration. No fixed version is available as of this review. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.3.1 to 2.11.0, the decryption dispatch performs insufficient structural and parameter validation before standard and agile decryptors slice, index, allocate, and divide using attacker-controlled values. Decrypt passes attacker-controlled EncryptionInfo and EncryptedPackage data into standardDecrypt or agileDecrypt before validating the structures used by those routines. When a malformed OLE compound file with a version-valid EncryptionInfo stream is opened or passed to Decrypt, nine malformed-input classes reach unrecovered Go runtime panics instead of the documented error path, allowing an attacker to terminate the calling process. No fixed version is available as of this review. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.3.1 to 2.11.0, extractPart allocates a byte slice directly from an attacker-controlled CFB directory-entry size before validating the sector chain or size domain. extractPart trusts the CFB directory entry streamSize for EncryptionInfo and EncryptedPackage allocations before validating the stream. When a crafted OLE compound file declares a negative or extremely large EncryptionInfo or EncryptedPackage stream size, the declared size reaches make with a negative length or forces a multi-gigabyte allocation, allowing an attacker to panic or exhaust process memory. No fixed version is available as of this review. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.8.1 to 2.11.0, ANCHORARRAY recursively calls the exported CalcCellValue function, creating a fresh calculation context at each cycle and bypassing in-flight and iteration controls. ANCHORARRAY calls CalcCellValue instead of cellResolver, so each recursive hop receives a new calcContext and loses cycle state. When mutually referencing dynamic-array formulas are evaluated directly or through formula-evaluating APIs, each recursion hop resets the cycle budget and prevents completion-based caches from breaking the cycle, allowing an attacker to cause a fatal Go stack overflow and abort the process. No fixed version is available as of this review. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.0.0 to 2.11.0 in github.com/xuri/excelize/v2 and from 1.1.0 to 1.4.1 in github.com/xuri/excelize, ColumnNameToNumber accumulates a bijective base-26 value in int64 without detecting overflow, allowing an invalid long column name to wrap to zero with no error. ColumnNameToNumber accepts the overflowing name VGWQHXLSDVIKWV, after which checkSheetR0 and xlsxWorksheet.checkRow use the wrapped column value as an index. When a crafted worksheet uses an overflowing column name in a row normalized by checkSheetR0 or checkRow, the wrapped zero column becomes a negative slice index during worksheet normalization, allowing an attacker to panic and terminate the calling process. No fixed version is available as of this review. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.3.1 to 2.11.0, agile decryption accepts an attacker-controlled spinCount and performs that many password-key derivation iterations before verifier validation. OpenFile reaches agileDecrypt, which passes the unbounded spinCount to convertPasswdToKey before password verification. When a crafted OLE encrypted-workbook header supplies an excessive spinCount and the file is opened, the key-derivation loop performs unbounded attacker-selected work and cannot be cancelled, allowing an attacker to consume a CPU core for an attacker-controlled duration. No fixed version is available as of this review. |
| Excelize is a Go language library for reading and writing Microsoft Excel spreadsheets. From 2.1.0 to 2.11.0, flatCols expands file-loaded column ranges without validating Min and Max against the worksheet column limit. SetColWidth reaches flatCols, which expands xlsxCol.Min through xlsxCol.Max without enforcing MaxColumns. When a crafted worksheet supplies an oversized col max attribute and the application invokes a column mutator, flatCols performs a deep copy and append for every attacker-selected column number, allowing an attacker to consume excessive CPU and memory or trigger OOM. No fixed version is available as of this review. |
