| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| In the Linux kernel, the following vulnerability has been resolved:
nvmet-rdma: fix response resource leak on queue teardown
When an nvme target with rdma transport is removed while I/Os are in
flight, a response can be posted but its send completion is never
delivered before the connection is torn down. As a result
nvmet_rdma_send_done() and nvmet_rdma_release_rsp() are never called for
the response, and this leaks the allocated RDMA read/write context and
request SGLs.
These leaks are recreated by running blktests nvme/061 with the rdma
transport and the siw driver. Kernel kmemleak feature reports them as
follows:
unreferenced object 0xffff88812bc490c0 (size 32):
comm "kworker/2:1H", pid 409, jiffies 4307744490
backtrace (crc 89afd339):
__kmalloc_noprof+0x5f9/0x890
sgl_alloc_order+0x7b/0x380
nvmet_req_alloc_sgls+0x290/0x4f0 [nvmet]
nvmet_rdma_map_sgl_keyed+0x241/0x12e0 [nvmet_rdma]
nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma]
__ib_process_cq+0x149/0x4c0 [ib_core]
ib_cq_poll_work+0x49/0x160 [ib_core]
process_one_work+0x8b2/0x1640
worker_thread+0x5fd/0xfe0
kthread+0x367/0x460
ret_from_fork+0x655/0x9d0
ret_from_fork_asm+0x1a/0x30
unreferenced object 0xffff88814bd05e80 (size 64):
comm "kworker/3:1H", pid 148, jiffies 4295195428
backtrace (crc e35510cb):
__kmalloc_noprof+0x5f9/0x890
rdma_rw_ctx_init+0x333/0x1fa0 [ib_core]
nvmet_rdma_map_sgl_keyed+0x5c8/0x12e0 [nvmet_rdma]
nvmet_rdma_handle_command+0x73e/0xb80 [nvmet_rdma]
__ib_process_cq+0x149/0x4c0 [ib_core]
ib_cq_poll_work+0x49/0x160 [ib_core]
process_one_work+0x8b2/0x1640
worker_thread+0x5fd/0xfe0
kthread+0x367/0x460
ret_from_fork+0x655/0x9d0
ret_from_fork_asm+0x1a/0x30
To avoid the memory leaks, reclaim the memory of the in-flight responses
when the queue QP is torn down. Call nvmet_rdma_free_rsp_resources()
that frees up the RDMA read/write context and the request SGLs of such
responses. |
| In the Linux kernel, the following vulnerability has been resolved:
batman-adv: bla: avoid CRC corruption due to parallel claim add
batadv_bla_add_claim() is used to add claims and modify the backbone of
claims for CLAIM frames from remote backbones and local packets. When it
handles a claim, it needs to either
* add the new claim's CRC to the backbone CRC
* remove the already existing claim's CRC from the old backbone and add it
to the new backbone
But when the "new" claim code was running in parallel to the "change
backbone" code, it can happen that the CRC was invalid because the
backbone_gw of the claim was changed twice in the "new" claim code path:
* CPU0 creates the claim for gateway A and publishes it in the claim
hash. The crc16 of the address has not yet been added to A's crc at
this point.
* CPU1 processes a claim frame of gateway B for the same client, finds
the just published claim, and performs the ownership change: it
switches the pointer to B, removes the crc16 from A's crc - which
never contained it - and adds it to B's crc.
* CPU0 continues behind the creation branch, unconditionally switches
the pointer back to A without compensating B's crc (its remove_crc
is false for the creation path), and finally adds the crc16 to A's
crc
The CRC is then wrong for both:
* claim belongs to A: but CRC is not part of backbone A's CRC
* claim doesn't belong to B: CRC is still part of backbone B's CRC
This wrong CRC is never recomputated from the stored claims. For local
backbone claims, this can also not recovered using syncs.
To avoid this, split the functionality in clear separate parts:
* new claim which always adds claim CRC to the backbone CRC (but never
changes the already set backbone_gw of the claim back)
* update of existing claim which automatically changes the backbone_gw
entry and only updates both backbone CRCs when there was an actual change |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: atmel-sha204a - fix heap info leak on I2C transfer failure
The nonblocking RNG path allocates a work_data structure to track the
state of an in-flight asynchronous I2C request. This pointer is stored
in rng->priv and later consumed by the read path once the transaction
completes.
If the underlying I2C transfer fails, the completion callback is invoked
with a non-zero status. In this case, the allocated work_data is not
usable for producing RNG output and must not remain associated with the
hwrng state.
Previously, the failure path only logged a warning but left the pointer
state uncleared, which can result in subsequent read attempts observing
stale state and interpreting it as valid completion data.
Fix this by freeing the pending work_data. The I2C transaction reports
an error. This ensures that failed requests do not leave residual state
behind that could be interpreted as valid RNG data on later reads.
Clearing rng->priv is done at the subsequent call to nonblocking read. |
| In the Linux kernel, the following vulnerability has been resolved:
cpufreq: imx6q: fix out-of-bounds write when probed more than once
imx6_soc_volt is allocated fresh on every probe, sized to the number of
ARM OPPs:
imx6_soc_volt = devm_kcalloc(cpu_dev, num, sizeof(*imx6_soc_volt),
GFP_KERNEL);
but it is filled through soc_opp_count, which has static storage and is
never reset. A second bind after an unbind keeps indexing from where the
first one stopped, and writes past the end of the new array.
Unbinding and rebinding the driver on qemu's mcimx6ul-evk, under KASAN:
BUG: KASAN: slab-out-of-bounds in imx6q_cpufreq_probe+0x3b0/0xa34
Write of size 4 at addr c5e90480 by task binder/73
imx6q_cpufreq_probe from platform_probe+0x88/0xe4
platform_probe from really_probe+0x108/0x384
bind_store from kernfs_fop_write_iter+0x1b4/0x28c
The write lands one u32 past the end of the allocation.
soc_opp_count is only read a few lines below the loop that fills it, so it
never needed static storage. Make it a local. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: synchronize heartbeat callbacks with o2net teardown
Patch series "ocfs2: harden heartbeat teardown races".
This series fixes two OCFS2 heartbeat/o2net teardown races found by
KASAN.
This patch (of 2):
Heartbeat callbacks stay registered while configfs local-node teardown
enters o2net_stop_listening(). A node-down event can still run through
o2net_disconnect_node() and o2net_set_nn_state() while teardown is
destroying o2net_wq, so the later queue/flush operations can hit a dead
workqueue. KASAN has caught this as a slab-use-after-free in
__queue_work() with the call chain:
KASAN slab-use-after-free in __queue_work+0x56/0xa90
Read of size 4
Call trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
__queue_work+0x56/0xa90
srso_alias_return_thunk+0x5/0xfbef5
__virt_addr_valid+0x19f/0x330
kasan_report+0xe0/0x110
__queue_delayed_work+0x58/0x1e0
queue_delayed_work_on+0xb4/0xc0
o2net_set_nn_state+0x467/0x840
o2net_disconnect_node+0x7b/0xe0
o2net_hb_node_down_cb+0x54/0x60
o2hb_run_event_list+0x236/0x2d0
o2hb_check_slot+0xad4/0xbc0
lock_release+0xc8/0x290
o2hb_check_slot+0x9ea/0xbc0
trace_hardirqs_on+0x18/0x130
o2hb_do_disk_heartbeat+0x646/0xb30 (fs/ocfs2/cluster/heartbeat.c:1079)
__lock_acquire+0x466/0x2260
lockdep_hardirqs_on_prepare+0xea/0x1a0
ktime_get_with_offset+0xe9/0x230
o2hb_thread+0x14e/0x770
kthread+0x1ad/0x1f0
ret_from_fork+0x3c9/0x540
__switch_to+0x2e9/0x730
ret_from_fork_asm+0x1a/0x30
Allocated by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
__kasan_kmalloc+0xaa/0xb0
__kmalloc_noprof+0x292/0x760
__alloc_workqueue+0x736/0xc60
alloc_workqueue_noprof+0xb1/0x110
o2net_start_listening+0xe5/0x430
o2nm_node_local_store+0x184/0x310
configfs_write_iter+0x18a/0x210
vfs_write+0x469/0x810
ksys_write+0xd2/0x170
do_syscall_64+0x115/0x6a0 (arch/x86/entry/syscall_64.c:87)
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Freed by task stack:
kasan_save_stack+0x33/0x60
kasan_save_track+0x14/0x30
kasan_save_free_info+0x3b/0x60
__kasan_slab_free+0x5f/0x80
kfree+0x313/0x590
rcu_core+0x4f4/0x1320
handle_softirqs+0x156/0x660
queue_delayed_work_on
o2net_set_nn_state
o2net_disconnect_node
o2net_hb_node_down_cb
o2hb_run_event_list
Keep heartbeat callbacks registered so quorum state still tracks node
state, but stop them from driving o2net reconnect/disconnect work once
local teardown starts. Mark the transport offline before destroying
o2net_wq, wait for any in-flight heartbeat callback to finish, and delay
bring-up replay until the new local node is published through
o2nm_this_node().
The replay also has to stay serialized with heartbeat callback delivery.
Otherwise a live-node snapshot can be copied, a real hb_down callback
can install -ENOTCONN for a peer, and the stale replay can call
o2net_hb_node_up() for that same peer and queue reconnect work even
though heartbeat is already down.
The buggy scenario involves two paths, with each column showing the order
within that path:
local-node teardown: heartbeat node-down callback:
1. configfs local-off enters 1. o2hb_run_event_list() invokes
o2net_stop_listening(). o2net_hb_node_down_cb().
2. teardown heads for 2. the callback reaches
destroy_workqueue(o2net_wq). o2net_disconnect_node() and
o2net_set_nn_state().
3. teardown destroys and NULLs 3. the callback flushes or queues
o2net_wq. work through o2net_wq. |
| In the Linux kernel, the following vulnerability has been resolved:
firmware: coreboot: Validate table bounds
The existing coreboot_table_populate() bounds checks limit individual
entries to the mapped length. However, coreboot_table_probe() replaces
the platform resource length with header and table sizes supplied by
firmware before mapping the full table.
A malformed table can overflow the 32-bit size addition or advertise an
extent beyond the resource, causing the driver to map and parse memory
outside the resource. A resource shorter than the fixed header is also
mapped as though it contained a complete header.
Reject resources shorter than the fixed header. After validating the
signature, require a complete header, calculate the advertised extent
with overflow checking, and reject extents beyond the resource before
remapping the table. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: nci: fix double completion race in nci_data_exchange_complete
nci_close_device() and nci_rx_work can both call
nci_data_exchange_complete() concurrently. After commit 4527025d440ce8
("nfc: nci: fix circular locking dependency in nci_close_device") moved
flush_workqueue(ndev->rx_wq) after mutex_unlock(&ndev->req_lock),
rx_work is no longer serialized with the explicit completion call in the
close path. Both callers read the non-NULL callback pointer and invoke
rawsock_data_exchange_complete(), which calls sock_put() -- but only one
sock_hold() was taken, so the second sock_put() underflows the refcount
and frees the socket while it is still in use.
Replace the bare clear_bit(NCI_DATA_EXCHANGE) with
test_and_clear_bit() so that only the first caller proceeds to invoke
the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: llcp: avoid userspace overflow on invalid optlen
nfc_llcp_getsockopt() casts optval to (u32 __user *) for put_user(), so
the kernel always stores 4 bytes regardless of the caller-supplied
optlen. The existing min_t(u32, len, sizeof(u32)) only clamps the length
reported back to userspace; it does not constrain the store. A call with
optlen < 4 therefore writes past the user buffer, violating the
getsockopt(2) contract for all five supported optnames.
Reject any call with optlen < sizeof(u32) up front. 'len' is int, so a
plain size comparison would promote a negative optlen to size_t and slip
past the check; an explicit 'len < 0' test is added first to catch
negative values before the size compare. |
| In the Linux kernel, the following vulnerability has been resolved:
amt: Don't support cross-netns setup.
When a lower device is unregistered, amt_device_event() tries
to unregister its upper AMT device, but it has two problems.
1. amt_lookup_upper_dev() looks up an upper device in the
lower device's netns only
2. amt_device_event() unregisters a single upper device only
If AMT device is created on a lower device in another netns,
removing the lower device triggers the splat below and gets
stuck until all upper devices are removed. [0]
The cross-netns setup seems unintentional considering 1. and
the following points:
* amt_link_setup() sets dev->netns_immutable to true
* skb_scrub_packet() is not called in the fast path
* iproute2 binary fails to find cross-netns lower device via
link-netns:
# ip -n ns1 link add amt0 link-netns ns2 type amt dev veth1
Cannot find device "veth1"
Instead of supporting it properly and preparing for per-netns
netdev unreg, let's forbid cross-netns setup.
Note that the problem 2. needs a separate fix.
[0]:
WARNING: net/core/dev.c:12518 at unregister_netdevice_many_notify+0x1cce/0x2250, CPU#48: ip/2031
Modules linked in:
CPU: 48 UID: 0 PID: 2031 Comm: ip Not tainted 7.2.0-rc5+ #27 PREEMPT(full)
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.17.0-debian-1.17.0-1 04/01/2014
RIP: 0010:unregister_netdevice_many_notify (net/core/dev.c:12518)
Code: 89 ef e8 d5 52 ae fe e9 d0 f4 ff ff 48 8d 3d f9 3b 9c 02 48 c7 c6 c0 0b 63 84 ba ab 1f 00 00 67 48 0f b9 3a e9 65 ff ff ff 90 <0f> 0b 90 eb 81 48 8d 3d f6 3b 9c 02 48 c7 c6 c0 0b 63 84 ba e2 1f
RSP: 0018:ffffc90004abf160 EFLAGS: 00010212
RAX: ffff888104d38260 RBX: ffff88800b0911b8 RCX: dffffc0000000000
RDX: 0000000000000000 RSI: 0000000000000008 RDI: ffffffff85b9f880
RBP: ffffc90004abf2d0 R08: ffffffff85b9f887 R09: 1ffffffff0b73f10
R10: dffffc0000000000 R11: fffffbfff0b73f11 R12: ffff88800b091d08
R13: ffff88800b091178 R14: dffffc0000000000 R15: ffff88800b091000
FS: 00007f555b86c600(0000) GS:ffff8881942a0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000562107d489c0 CR3: 0000000109a40002 CR4: 0000000000372ef0
Call Trace:
<TASK>
rtnl_dellink (net/core/rtnetlink.c:3632 net/core/rtnetlink.c:3674)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7112)
netlink_rcv_skb (net/netlink/af_netlink.c:2556)
netlink_unicast (net/netlink/af_netlink.c:1319)
netlink_sendmsg (net/netlink/af_netlink.c:1900)
____sys_sendmsg (net/socket.c:775)
__sys_sendmsg (net/socket.c:2738)
do_syscall_64 (arch/x86/entry/syscall_64.c:63)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121)
...
unregister_netdevice: waiting for veth0 to become free. Usage count = 7
ref_tracker: netdev@ffff88800d7496d8 has 3/3 users at
__netdev_adjacent_dev_insert (./include/linux/netdevice.h:4525 ./include/linux/netdevice.h:4554 net/core/dev.c:8791)
__netdev_upper_dev_link (net/core/dev.c:8879 net/core/dev.c:8963)
netdev_upper_dev_link (net/core/dev.c:9009)
amt_newlink (drivers/net/amt.c:3321) |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix MLD ID in MAC TXD and HIF TXP
Problem:
MCU command timeout while the firmware state is normal, and the
firmware keeps showing the error log "ERROR!! NO PAUSE...".
Root cause:
If the MLD_ID field in the TXD is neither the primary link id nor the
secondary link id, it may lead to a firmware busy loop when the third
link is in power saving mode.
Remap frames directed to a third link to the primary link wcid. Since
TX status events and txfree completions carry the wcid the firmware
saw, use the remapped wcid for packet id tracking and non-AQL packet
accounting as well, while the frame keeps its original link context
for addressing, band and OMAC selection. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The
subsequent memcpy() destination advances by sizeof(full struct) per slot
via C pointer arithmetic, not by the clamped len. When firmware sends
short TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/dma: Restore locking around msi_page_list
Unlike a group's default domain, which is always freshly allocated
and privately owned (iommu_group_alloc_default_domain()), VFIO type1's
legacy container merges any newly attached group into an existing
domain whenever their iommu_ops and cache-coherency enforcement match.
iommu_dma_get_msi_page() only asserts the caller's own group mutex is
held (iommu_group_mutex_assert()). On an IOMMU that publishes
IOMMU_RESV_SW_MSI, e.g. ARM SMMU, a VM with two such devices assigned
through the legacy container can have their guest drivers probe and
allocate MSIs in parallel; each host-side VFIO_DEVICE_SET_IRQS lands
on a different device fd and group mutex, but both devices' domains
are the same merged domain, so both can enter
iommu_dma_get_msi_page() concurrently and corrupt msi_page_list.
commit 288683c92b1a ("iommu: Make iommu_dma_prepare_msi() into a
generic operation") dropped the prior msi_prepare_lock on the
reasoning that "each iommu_domain is unique to a group," which holds
for default domains but not this VFIO type1 case. Restore the static
lock, since it's only guarding a corner case and will likely never
be contended.
iommufd avoids the equivalent problem by having its own callers
(iommufd_sw_map_msi()) take a ctx-wide sw_msi_lock before ever
reaching the shared list. VFIO type1 can't mirror that since it
dispatches to iommu_dma_sw_msi() which is outside VFIO's jurisdiction. |
| In the Linux kernel, the following vulnerability has been resolved:
fbdev: kyro: Validate overlay viewport coordinates
The overlay viewport end coordinates are computed from the viewport
origin and dimensions using 32-bit unsigned arithmetic. Large input
values can cause these calculations to wrap around before the resulting
coordinates are passed to SetOverlayViewPort().
SetOverlayViewPort() packs the viewport coordinates into 16-bit
register fields. The X coordinates are additionally adjusted by +2
and +1 before being written. Validate the coordinate calculations
for 32-bit wraparound and ensure that the adjusted coordinates fit
within their 16-bit register fields before calling
SetOverlayViewPort().
Found by Linux Verification Center (linuxtesting.org) with SVACE. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: cls_api: fix teardown of an adopted proto on insert-race loss
In tc_new_tfilter() the create branch sets tp_created = 1 before calling
tcf_chain_tp_insert_unique(). When the caller loses the race (another
request inserted a proto at the same chain/prio first), insert_unique()
destroys the caller's own tp_new and returns the winner's proto with an
extra reference. tp_created was never cleared, so the loser's errout
path treated the winner's live proto as its own and called
tcf_chain_tp_delete_empty() on it, silently unlinking an active
classifier that the winning request already advertised via
RTM_NEWTFILTER.
Track the outcome of the insert step in a single tri-state variable so
each errout path reacts correctly:
- TP_NOT_CREATED: no proto created; pursue the old path.
- TP_CREATED: proto inserted successfully; same code path as before.
- TP_NOT_OWNED: New - lost the insert race; tp is another request's proto
(chain ref already released by tp_new's destroy)
Both errout reactions are single expressions derived from the state.
This fix is motivated by the Sashiko's automated review of Patch
(net/sched: cls_api: Always acquire rtnl_lock when destroying locked
classifiers) [1][2]. The review identified the silent-unlink behaviour of
an adopted proto's teardown when a request loses the
tcf_chain_tp_insert_unique() race.
[1] https://sashiko.dev/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com
[2] https://netdev-ai.bots.linux.dev/sashiko/#/patchset/20260801125632.360365-1-jhs%40mojatatu.com |
| In the Linux kernel, the following vulnerability has been resolved:
iio: light: gp2ap002: Fix unbalanced runtime PM on repeated event writes
The IIO core does not filter duplicate writes to the event enable
attribute, so writing the same value twice invokes
write_event_config() twice. Enabling twice leaks a runtime PM
reference, preventing the device from ever suspending again;
disabling twice underflows the usage count and triggers a
"Runtime PM usage count underflow" warning.
Bail out early when the requested state matches the current state.
While at it, switch to pm_runtime_resume_and_get() so a failed
resume is propagated to userspace instead of silently marking the
event enabled. |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: sd: Fix error handling in sd_probe() after large pool creation failure
After device_add(&sdkp->disk_dev) succeeds, sd_large_pool_create()
failure must unregister disk_dev and let scsi_disk_release() free
sdkp. Going through out_free_index kfree()s an already registered device
and leaks the sysfs entry. |
| In the Linux kernel, the following vulnerability has been resolved:
ARM: 9483/1: select HAVE_POSIX_CPU_TIMERS_TASK_WORK
Commit c6e61c06d606 ("ARM: 9463/1: Allow to enable RT") enabled PREEMPT_RT
on ARM but did not select HAVE_POSIX_CPU_TIMERS_TASK_WORK. This leaves
CONFIG_POSIX_CPU_TIMERS_TASK_WORK disabled, so CPU timers expire in hard
IRQ context.
On PREEMPT_RT this makes run_posix_cpu_timers() take the sleeping
sighand->siglock:
BUG: sleeping function called from invalid context at spinlock_rt.c:48
rt_spin_lock from lock_task_sighand
lock_task_sighand from run_posix_cpu_timers
run_posix_cpu_timers from update_process_times
ARM handles TIF_NOTIFY_RESUME on all return-to-user paths, including v7-M.
ARM32 KVM host support was removed by commit 541ad0150ca4 ("arm: Remove
32bit KVM host support"), so the select need not be conditional on KVM.
Select it to defer POSIX CPU timer expiry to task context.
Reproduced with setrlimit(RLIMIT_CPU, ...) and a busy loop. The same path
is used by setitimer(ITIMER_PROF or ITIMER_VIRTUAL) and POSIX CPU timers
created with timer_create(). |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/srp: fix heap information leak on a truncated SRP_CRED_REQ
srp_recv_done() passes wc->byte_len to srp_process_rsp(). It passes
nothing to srp_process_cred_req() and srp_process_aer_req(), which read
fixed-size fields from the receive buffer without checking that those
fields were received.
The buffer size is max_ti_iu_len, which comes from the login response
and is not validated. A target that advertises 8 and then sends an
8-byte SRP_CRED_REQ makes the initiator read req->tag from beyond the
end of the buffer. req->tag is copied into the SRP_CRED_RSP and sent
back, so those bytes reach the target. SRP_AER_REQ behaves the same way
and also reads req->lun.
The leak is 8 bytes per response. max_ti_iu_len also decides which slab
cache the buffer comes from. With 8 the buffer is a kmalloc-8 object and
the read is entirely outside it:
BUG: KASAN: slab-out-of-bounds in srp_recv_done+0x172b/0x1aa0
Read of size 8 at addr ffff888104714da8 by task kworker/u8:3/50
which belongs to the cache kmalloc-8 of size 8
The buggy address is located 0 bytes to the right of
allocated 8-byte region [ffff888104714da0, ffff888104714da8)
Without KASAN the returned bytes are whatever is next in the slab. One
run returned ".strtab".
rsp->data[3] in srp_process_rsp() has the same problem: only
resp_data_len is checked before it is read.
Drop a request that is shorter than the structure being parsed, and
check byte_len before the tsk_mgmt read. |
| In the Linux kernel, the following vulnerability has been resolved:
ocfs2: validate external xattr entries when reading metadata
ocfs2_validate_xattr_block() checks the xattr block header before the
block reaches higher-level xattr users, but it does not verify that a
non-indexed block's xh_count and entry offsets fit inside the block.
Indexed buckets likewise reach list/get consumers after ECC without an
entry-bounds check.
Use the flat xattr entry validator for non-indexed external xattr blocks,
and use a bucket-specific validator for indexed buckets at metadata read
time. The bucket validator keeps the entry array bounded by the first
bucket block while checking name/value offsets against the bucket block
they target.
Reject corrupted external xattr metadata before listxattr() or getxattr()
can walk out-of-range entry arrays or name/value offsets.
Validation reproduced this kernel report:
BUG: KASAN: use-after-free in ocfs2_xattr_list_entries+0xd7/0x190
Read of size 1 at addr ffff88810a654007 by task ocfs2_xattr_lis/630
Call Trace:
dump_stack_lvl+0x66/0xa0
print_report+0xce/0x630
kasan_report+0xe0/0x110
ocfs2_xattr_list_entries+0xd7/0x190
ocfs2_listxattr+0x3f6/0x610
listxattr+0x90/0xe0
path_listxattrat+0xed/0x220
do_syscall_64+0x115/0x6a0
entry_SYSCALL_64_after_hwframe+0x77/0x7f |
