| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/vmcp: Initialize full session info to zero
The cma_alloc bit as well as the response can contain old data.
cma_release will not free the kmalloced memory in that case and
the response code might leak kernel stack data to CAP_SYS_ADMIN
users. |
| SOAP information disclosure through malformed array dimensions.
The SOAP extension reads an uninitialized array position when decoding an encoded array whose arraySize attribute is empty, whitespace-only or non-numeric, or when such dimensions come from a WSDL definition. Four bytes of unrelated heap data can then be used as an integer key in the decoded array. An unauthenticated remote client can trigger this with a crafted request to a SoapServer endpoint, and a malicious SOAP server with a response to SoapClient. Heap memory is disclosed only if the application returns or otherwise exposes the decoded array.
This issue affects PHP versions before 8.2.36, 8.3.* before 8.3.37, 8.4.* before 8.4.28 and 8.5.* before 8.5.13. |
| In the Linux kernel, the following vulnerability has been resolved:
can: dev: can_fill_info(): don't wake up controller if interface is down
If the interface is down, the CAN controller might be powered down and
its clocks gated. Don't call do_get_berr_counter() to read the bus error
counters if the interface is down, and adjust can_get_size() to match.
This removes one trigger for a synchronous external abort seen on
i.MX8QXP when "ip link show" is run on a flexcan interface that was
never brought up. The underlying cause is platform-specific: on i.MX8QXP
the CAN clocks are gated through the SCU LPCG and the subsystem shares
the IMX_SC_R_CAN_0 power domain, and there is a window after
pm_runtime_resume_and_get() returns where the clock has not reached the
module yet. This patch avoids the netlink query path while the interface
is down, but does not root-cause the LPCG window itself.
As a result, IFLA_CAN_BERR_COUNTER is no longer reported for down
interfaces. Userspace must treat the attribute as optional.
The issue was triggered on an i.MX8QXP board by running "ip link show"
without ever bringing the interface up:
Internal error: synchronous external abort: 0000000096000210
pc : flexcan_read_le+0x0/0x18
lr : flexcan_get_berr_counter+0x4c/0x8c
Call trace:
flexcan_read_le+0x0/0x18
flexcan_get_berr_counter+0x4c/0x8c
can_fill_info+0x1f8/0x434
rtnl_fill_ifinfo+0x8fc/0xbb4
rtnl_dump_ifinfo+0x364/0x448
This is the same class of problem fixed for m_can in
commit 91a55c72a821 ("can: m_can: m_can_get_berr_counter(): don't
wake up controller if interface is down"). |
| Uninitialized resource in Media in Google Chrome prior to 158.0.8127.36 allowed a remote attacker to read memory inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) |
| In the Linux kernel, the following vulnerability has been resolved:
mm/cma: accept memory of CMA areas reserved at a fixed address
CMA areas allocated from memblock have their memory accepted by
memblock_alloc_range_nid(), but areas reserved at a fixed address with
memblock_reserve() are not.
If a fixed CMA area is requested by the cma=<size>@<base> command line
parameter, it may be in regular RAM and on TDX and SEV-SNP guests it
must be accepted.
Accept the memory of fixed CMA areas as well, so that all CMA areas are
accepted regardless of how they were reserved. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/cma: accept memory of multi-range CMA areas
Patch series "mm/cma: accept memory of CMA areas reserved with
memblock_reserve()", v1.
Pages of allocated CMA areas are released to the buddy allocator with
__free_pages(), which does not check for unaccepted memory.
This usually works because memblock accepts the memory it allocates.
However, multi-range CMA areas, used by hugetlb_cma, and fixed CMA areas
requested with cma=<size>@<base> are reserved with memblock_reserve() and
their memory is never accepted.
On TDX and SEV-SNP guests the first access to such a page is fatal.
To ease the backporting, each case is addressed by a separate patch:
- patch 1 accepts the memory of multi-range CMA areas
- patch 2 does the same for the fixed CMA areas
The second patch won't apply cleanly to 6.6 and 6.12, but I believe the
stable team LLMs will take care of that :)
This patch (of 2):
On systems with unaccepted memory, memblock allocations accept the
allocated range, but when cma_declare_contiguous_multi() uses open coded
allocation of multiple ranges, it reserves them with memblock_reserve()
and they are never accepted.
These pages are released to the buddy allocator by cma_activate_area()
with __free_pages() that does not check for unaccepted memory, so the
first access to such a page in a TDX or SEV-SNP guest is fatal.
Accept the memory of each range when it is reserved. |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: clamp the pNFS layout range to the maximum file size
xfs_fs_map_blocks() lets two bad layout ranges through. An offset of
2^63 or more is negative and passes "offset > limit". A length above
the limit, such as NFS4_UINT64_MAX, wraps "offset > limit - length"
and stays unclamped. With NFS4_UINT64_MAX, a read layout is built from
an uninitialized mapping.
Reject a negative offset and one at the limit, and clamp the length.
This needs "xfs: cap the block count of xfs_iomap_write_direct() at one
extent". |
| In the Linux kernel, the following vulnerability has been resolved:
udf: don't use eloc after the end of the unallocated space table
When udf_next_aext() returns 0, its eloc, elen and etype outputs hold
no defined value. Two walks of the unallocated space table still use
eloc after the walk has reached the end of the table.
udf_table_prealloc_blocks() looks for a free extent starting at
first_block and decides whether it found one by comparing eloc with
first_block after the walk. If the table's list ends in a continuation
descriptor that leads to an empty allocation extent, eloc is then the
block of that allocation extent, which is in use, and if that is
first_block, the block is handed out as preallocation. Once
udf_discard_prealloc() no longer frees the wrong block, this is what
still makes fsx in generic/091 and generic/263 read back bad data on a
table, in about one run in four. Only take the extent if the walk
stopped at it.
When udf_table_free_blocks() cannot merge the freed blocks into an
existing extent, it appends a new one and sets only its block number,
so the partition reference comes from whatever eloc held after the
walk, and with long allocation descriptors it is written to disk. For
a table without extents, eloc was never set. Take the partition
reference from the freed blocks instead. Short allocation descriptors
do not store the partition reference, which is why this half remains a
latent long-descriptor fix rather than a reproduced failure. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/nouveau/nvkm: clear use.enabled when subdev init fails
On Kepler boards without the video decode falcon firmware installed
(msvld/mspdec/msppp), every other VA-API decode attempt binds to an
engine with no ucode loaded. The submitted work never completes, which
leads to a context switch timeout, a channel recovery that cannot reset
the engine, and eviction waits on fences that never signal. The process
ends up stuck in D state, or killed by SIGBUS when it touches a buffer
evicted after the wait times out:
msvld: unable to load firmware data
msvld: init failed, -19
fifo: SCHED_ERROR 0a [CTXSW_TIMEOUT]
vo[5444]: channel 14 killed!
WARNING: drivers/gpu/drm/nouveau/nvkm/engine/fifo/runl.c:117 at nvkm_runl_rc+0x2a4/0x3b0 [nouveau]
[TTM] Buffer eviction failed
WARNING: drivers/gpu/drm/nouveau/nouveau_bo.c:1092 at nouveau_bo_move_ntfy.part.0+0x9b/0x100 [nouveau]
Tracing nvkm_subdev_ref() and nvkm_subdev_init_() shows the pattern:
a reference taken with enabled=0 runs nvkm_falcon_init(), which
returns -ENODEV; the next reference sees enabled=1 and succeeds
without running it.
Clear use.enabled when init() fails, so that every later reference
retries init and fails cleanly. The other readers of use.enabled are
fini() handlers that use it to skip teardown, which they now also do
after a failed init().
On a GK107 (Quadro K1100M) without video firmware, playing H.264 with
mpv --hwdec=auto: without this patch the GPU channel is killed within a
minute and mpv hangs; with it, VA-API decoder creation fails, mpv falls
back to software decoding, and no faults are logged. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts for navi10_ih
Port this change to navi10_ih.c:
commit afbf7955ff01 ("drm/amdgpu: clear RB_OVERFLOW bit when enabling interrupts")
Setting IH_RB_WPTR to 0 does not clear RB_OVERFLOW if RB_ENABLE is not
set. Pulse WPTR_OVERFLOW_CLEAR after RB_ENABLE (and with
WPTR_OVERFLOW_ENABLE) so overflow is cleared when interrupts are
enabled.
(cherry picked from commit 713fb4ab04f4d2af6120f8eb607c5673b2759b38) |
| Heap-based buffer overflow in Windows ALPC allows an authorized attacker to elevate privileges locally. |
| Use of uninitialized resource in Microsoft Windows App Store allows an authorized attacker to disclose information locally. |
| NGINX Plus and NGINX Open Source have a vulnerability in the ngx_http_slice_module module. When the slice directive and unnamed regex captures are configured or when a background cache update happens, unauthenticated attackers can send requests that may cause uninitialized memory access in the NGINX worker process, leading to limited disclosure of memory or a restart.
Impact:
This vulnerability may allow remote, unauthenticated attackers to have limited control to disclose memory contents or restart the NGINX worker process. There is no control plane exposure; this is a data plane issue only.
Note: The ngx_http_slice_module module is not enabled by default; it's enabled with the --with-http_slice_module configuration parameter.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Description
When NGINX Plus or NGINX Open Source is configured with ssl_session_cache
shared:name:size
without an explicit ssl_session_ticket_key file directives to automatically rotate SSL session ticket keys, a remote unauthenticated attacker is able to forge client SSL sessions
in a non-deterministic manner that is beyond the attacker's control. An attacker could leverage this vulnerability to bypass verification of client certificates.
Impact
This vulnerability can lead to the exposure of resources or functionality to unintended actors, possibly providing attackers with access to sensitive information. There is no control plane exposure; this is a data plane issue only.
Note: Software versions which have reached End of Technical Support (EoTS) are not evaluated. |
| Uninitialized resource in GPU in Google Chrome prior to 158.0.8127.36 allowed a remote attacker who had compromised the renderer process to obtain cross-origin data via a crafted HTML page. (Chromium security severity: High) |
| Use of uninitialized resource in Kernel Transaction Manager allows an authorized attacker to disclose information locally. |
| Use of uninitialized resource in Windows Program Compatibility Assistant Service allows an authorized attacker to disclose information locally. |
| Use of uninitialized resource in Windows Broker Infrastructure Service allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: x86: Unconditionally reset MMU context when emulating INIT
Force an MMU reset when emulating an INIT even if paging was already
disabled, as the MMU page role includes guest_mode (L2), i.e. an INIT while
L2 is running with CR0.PG=0 will result in KVM running L1 with a stale MMU
context.
Alternatively, the reset could be scoped strictly to paging being enabled
or L2 being active, but SMM is also encoded in the page role. Even though
it _should_ be impossible for the vCPU to be INIT'd while SMM is active,
there's zero value in not handling SMM. At that point, the only scenario
where KVM _doesn't_ need to reset the MMU context is on an INIT with the
vCPU running in Real Mode or Unpaged Protect Mode, and while INIT in those
modes is somewhat common, it's far from a hot path and re-initializing the
MMU is not expensive, especially when the role isn't changing (KVM elides
most of the re-configuration in that case).
Note, like the Fixes commit, this bug only affects nested SVM as INIT is an
unconditional intercept on VMX, i.e. it's impossible to emulate INIT while
L2 is active.
Temporarily keep the guest TLB flush when CR0.PG is being cleared even
though it is fully redundant with the flush that is emitted on all INIT
events (KVM itself only does RESET when a vCPU is being created, i.e. when
CR0.PG must be '0'). |
| The Jakarta Security LDAP identity store does not neutralize special characters in the caller name before using it in directory queries. A remote unauthenticated attacker can alter the queries to enumerate accounts, infer directory attribute values, or influence which directory entry the login is validated against. Only applications using the LDAP identity store are affected. Users are recommended to upgrade to version 10.3.0 or 11.0.0-M2, which fix the issue. |