| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
net: sched: cls_u32: Undo tcf_bind_filter if u32_replace_hw_knode
When u32_replace_hw_knode fails, we need to undo the tcf_bind_filter
operation done at u32_set_parms. |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: csum: Fix OoB access in IP checksum code for negative lengths
Although commit c2c24edb1d9c ("arm64: csum: Fix pathological zero-length
calls") added an early return for zero-length input, syzkaller has
popped up with an example of a _negative_ length which causes an
undefined shift and an out-of-bounds read:
| BUG: KASAN: slab-out-of-bounds in do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| Read of size 4294966928 at addr ffff0000d7ac0170 by task syz-executor412/5975
|
| CPU: 0 PID: 5975 Comm: syz-executor412 Not tainted 6.4.0-rc4-syzkaller-g908f31f2a05b #0
| Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/25/2023
| Call trace:
| dump_backtrace+0x1b8/0x1e4 arch/arm64/kernel/stacktrace.c:233
| show_stack+0x2c/0x44 arch/arm64/kernel/stacktrace.c:240
| __dump_stack lib/dump_stack.c:88 [inline]
| dump_stack_lvl+0xd0/0x124 lib/dump_stack.c:106
| print_address_description mm/kasan/report.c:351 [inline]
| print_report+0x174/0x514 mm/kasan/report.c:462
| kasan_report+0xd4/0x130 mm/kasan/report.c:572
| kasan_check_range+0x264/0x2a4 mm/kasan/generic.c:187
| __kasan_check_read+0x20/0x30 mm/kasan/shadow.c:31
| do_csum+0x44/0x254 arch/arm64/lib/csum.c:39
| csum_partial+0x30/0x58 lib/checksum.c:128
| gso_make_checksum include/linux/skbuff.h:4928 [inline]
| __udp_gso_segment+0xaf4/0x1bc4 net/ipv4/udp_offload.c:332
| udp6_ufo_fragment+0x540/0xca0 net/ipv6/udp_offload.c:47
| ipv6_gso_segment+0x5cc/0x1760 net/ipv6/ip6_offload.c:119
| skb_mac_gso_segment+0x2b4/0x5b0 net/core/gro.c:141
| __skb_gso_segment+0x250/0x3d0 net/core/dev.c:3401
| skb_gso_segment include/linux/netdevice.h:4859 [inline]
| validate_xmit_skb+0x364/0xdbc net/core/dev.c:3659
| validate_xmit_skb_list+0x94/0x130 net/core/dev.c:3709
| sch_direct_xmit+0xe8/0x548 net/sched/sch_generic.c:327
| __dev_xmit_skb net/core/dev.c:3805 [inline]
| __dev_queue_xmit+0x147c/0x3318 net/core/dev.c:4210
| dev_queue_xmit include/linux/netdevice.h:3085 [inline]
| packet_xmit+0x6c/0x318 net/packet/af_packet.c:276
| packet_snd net/packet/af_packet.c:3081 [inline]
| packet_sendmsg+0x376c/0x4c98 net/packet/af_packet.c:3113
| sock_sendmsg_nosec net/socket.c:724 [inline]
| sock_sendmsg net/socket.c:747 [inline]
| __sys_sendto+0x3b4/0x538 net/socket.c:2144
Extend the early return to reject negative lengths as well, aligning our
implementation with the generic code in lib/checksum.c |
| In the Linux kernel, the following vulnerability has been resolved:
arm64: sme: Use STR P to clear FFR context field in streaming SVE mode
The FFR is a predicate register which can vary between 16 and 256 bits
in size depending upon the configured vector length. When saving the
SVE state in streaming SVE mode, the FFR register is inaccessible and
so commit 9f5848665788 ("arm64/sve: Make access to FFR optional") simply
clears the FFR field of the in-memory context structure. Unfortunately,
it achieves this using an unconditional 8-byte store and so if the SME
vector length is anything other than 64 bytes in size we will either
fail to clear the entire field or, worse, we will corrupt memory
immediately following the structure. This has led to intermittent kfence
splats in CI [1] and can trigger kmalloc Redzone corruption messages
when running the 'fp-stress' kselftest:
| =============================================================================
| BUG kmalloc-1k (Not tainted): kmalloc Redzone overwritten
| -----------------------------------------------------------------------------
|
| 0xffff000809bf1e22-0xffff000809bf1e27 @offset=7714. First byte 0x0 instead of 0xcc
| Allocated in do_sme_acc+0x9c/0x220 age=2613 cpu=1 pid=531
| __kmalloc+0x8c/0xcc
| do_sme_acc+0x9c/0x220
| ...
Replace the 8-byte store with a store of a predicate register which has
been zero-initialised with PFALSE, ensuring that the entire field is
cleared in memory.
[1] https://lore.kernel.org/r/CA+G9fYtU7HsV0R0dp4XEH5xXHSJFw8KyDf5VQrLLfMxWfxQkag@mail.gmail.com |
| In the Linux kernel, the following vulnerability has been resolved:
xsk: fix refcount underflow in error path
Fix a refcount underflow problem reported by syzbot that can happen
when a system is running out of memory. If xp_alloc_tx_descs() fails,
and it can only fail due to not having enough memory, then the error
path is triggered. In this error path, the refcount of the pool is
decremented as it has incremented before. However, the reference to
the pool in the socket was not nulled. This means that when the socket
is closed later, the socket teardown logic will think that there is a
pool attached to the socket and try to decrease the refcount again,
leading to a refcount underflow.
I chose this fix as it involved adding just a single line. Another
option would have been to move xp_get_pool() and the assignment of
xs->pool to after the if-statement and using xs_umem->pool instead of
xs->pool in the whole if-statement resulting in somewhat simpler code,
but this would have led to much more churn in the code base perhaps
making it harder to backport. |
| In the Linux kernel, the following vulnerability has been resolved:
NFSD: Avoid calling OPDESC() with ops->opnum == OP_ILLEGAL
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[]. |
| In the Linux kernel, the following vulnerability has been resolved:
octeon_ep: cancel queued works in probe error path
If it fails to get the devices's MAC address, octep_probe exits while
leaving the delayed work intr_poll_task queued. When the work later
runs, it's a use after free.
Move the cancelation of intr_poll_task from octep_remove into
octep_device_cleanup. This does not change anything in the octep_remove
flow, but octep_device_cleanup is called also in the octep_probe error
path, where the cancelation is needed.
Note that the cancelation of ctrl_mbox_task has to follow
intr_poll_task's, because the ctrl_mbox_task may be queued by
intr_poll_task. |
| In the Linux kernel, the following vulnerability has been resolved:
fs: dlm: fix use after free in midcomms commit
While working on processing dlm message in softirq context I experienced
the following KASAN use-after-free warning:
[ 151.760477] ==================================================================
[ 151.761803] BUG: KASAN: use-after-free in dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.763414] Read of size 4 at addr ffff88811a980c60 by task lock_torture/1347
[ 151.765284] CPU: 7 PID: 1347 Comm: lock_torture Not tainted 6.1.0-rc4+ #2828
[ 151.766778] Hardware name: Red Hat KVM/RHEL-AV, BIOS 1.16.0-3.module+el8.7.0+16134+e5908aa2 04/01/2014
[ 151.768726] Call Trace:
[ 151.769277] <TASK>
[ 151.769748] dump_stack_lvl+0x5b/0x86
[ 151.770556] print_report+0x180/0x4c8
[ 151.771378] ? kasan_complete_mode_report_info+0x7c/0x1e0
[ 151.772241] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.773069] kasan_report+0x93/0x1a0
[ 151.773668] ? dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.774514] __asan_load4+0x7e/0xa0
[ 151.775089] dlm_midcomms_commit_mhandle+0x19d/0x4b0
[ 151.775890] ? create_message.isra.29.constprop.64+0x57/0xc0
[ 151.776770] send_common+0x19f/0x1b0
[ 151.777342] ? remove_from_waiters+0x60/0x60
[ 151.778017] ? lock_downgrade+0x410/0x410
[ 151.778648] ? __this_cpu_preempt_check+0x13/0x20
[ 151.779421] ? rcu_lockdep_current_cpu_online+0x88/0xc0
[ 151.780292] _convert_lock+0x46/0x150
[ 151.780893] convert_lock+0x7b/0xc0
[ 151.781459] dlm_lock+0x3ac/0x580
[ 151.781993] ? 0xffffffffc0540000
[ 151.782522] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.783379] ? dlm_scan_rsbs+0xa70/0xa70
[ 151.784003] ? preempt_count_sub+0xd6/0x130
[ 151.784661] ? is_module_address+0x47/0x70
[ 151.785309] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.786166] ? 0xffffffffc0540000
[ 151.786693] ? lockdep_init_map_type+0xc3/0x360
[ 151.787414] ? 0xffffffffc0540000
[ 151.787947] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.789004] ? torture_stop+0x120/0x120 [dlm_locktorture]
[ 151.789858] ? 0xffffffffc0540000
[ 151.790392] ? lock_torture_cleanup+0x20/0x20 [dlm_locktorture]
[ 151.791347] ? delay_tsc+0x94/0xc0
[ 151.791898] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.792735] ? torture_start+0x30/0x30 [dlm_locktorture]
[ 151.793606] lock_torture+0x177/0x270 [dlm_locktorture]
[ 151.794448] ? torture_dlm_lock_sync.isra.3+0x150/0x150 [dlm_locktorture]
[ 151.795539] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.796476] ? do_raw_spin_lock+0x11e/0x1e0
[ 151.797152] ? mark_held_locks+0x34/0xb0
[ 151.797784] ? _raw_spin_unlock_irqrestore+0x30/0x70
[ 151.798581] ? __kthread_parkme+0x79/0x110
[ 151.799246] ? trace_preempt_on+0x2a/0xf0
[ 151.799902] ? __kthread_parkme+0x79/0x110
[ 151.800579] ? preempt_count_sub+0xd6/0x130
[ 151.801271] ? __kasan_check_read+0x11/0x20
[ 151.801963] ? __kthread_parkme+0xec/0x110
[ 151.802630] ? lock_torture_stats+0x80/0x80 [dlm_locktorture]
[ 151.803569] kthread+0x192/0x1d0
[ 151.804104] ? kthread_complete_and_exit+0x30/0x30
[ 151.804881] ret_from_fork+0x1f/0x30
[ 151.805480] </TASK>
[ 151.806111] Allocated by task 1347:
[ 151.806681] kasan_save_stack+0x26/0x50
[ 151.807308] kasan_set_track+0x25/0x30
[ 151.807920] kasan_save_alloc_info+0x1e/0x30
[ 151.808609] __kasan_slab_alloc+0x63/0x80
[ 151.809263] kmem_cache_alloc+0x1ad/0x830
[ 151.809916] dlm_allocate_mhandle+0x17/0x20
[ 151.810590] dlm_midcomms_get_mhandle+0x96/0x260
[ 151.811344] _create_message+0x95/0x180
[ 151.811994] create_message.isra.29.constprop.64+0x57/0xc0
[ 151.812880] send_common+0x129/0x1b0
[ 151.813467] _convert_lock+0x46/0x150
[ 151.814074] convert_lock+0x7b/0xc0
[ 151.814648] dlm_lock+0x3ac/0x580
[ 151.815199] torture_dlm_lock_sync.isra.3+0xe9/0x150 [dlm_locktorture]
[ 151.816258] torture_ex_iter+0xc3/0xea [dlm_locktorture]
[ 151.817129] lock_t
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
scsi: Revert "scsi: core: Do not increase scsi_device's iorequest_cnt if dispatch failed"
The "atomic_inc(&cmd->device->iorequest_cnt)" in scsi_queue_rq() would
cause kernel panic because cmd->device may be freed after returning from
scsi_dispatch_cmd().
This reverts commit cfee29ffb45b1c9798011b19d454637d1b0fe87d. |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: clean up potential nfsd_file refcount leaks in COPY codepath
There are two different flavors of the nfsd4_copy struct. One is
embedded in the compound and is used directly in synchronous copies. The
other is dynamically allocated, refcounted and tracked in the client
struture. For the embedded one, the cleanup just involves releasing any
nfsd_files held on its behalf. For the async one, the cleanup is a bit
more involved, and we need to dequeue it from lists, unhash it, etc.
There is at least one potential refcount leak in this code now. If the
kthread_create call fails, then both the src and dst nfsd_files in the
original nfsd4_copy object are leaked.
The cleanup in this codepath is also sort of weird. In the async copy
case, we'll have up to four nfsd_file references (src and dst for both
flavors of copy structure). They are both put at the end of
nfsd4_do_async_copy, even though the ones held on behalf of the embedded
one outlive that structure.
Change it so that we always clean up the nfsd_file refs held by the
embedded copy structure before nfsd4_copy returns. Rework
cleanup_async_copy to handle both inter and intra copies. Eliminate
nfsd4_cleanup_intra_ssc since it now becomes a no-op. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: fix kasan splat when generating ipv4 pmtu error
If we try to emit an icmp error in response to a nonliner skb, we get
BUG: KASAN: slab-out-of-bounds in ip_compute_csum+0x134/0x220
Read of size 4 at addr ffff88811c50db00 by task iperf3/1691
CPU: 2 PID: 1691 Comm: iperf3 Not tainted 6.5.0-rc3+ #309
[..]
kasan_report+0x105/0x140
ip_compute_csum+0x134/0x220
iptunnel_pmtud_build_icmp+0x554/0x1020
skb_tunnel_check_pmtu+0x513/0xb80
vxlan_xmit_one+0x139e/0x2ef0
vxlan_xmit+0x1867/0x2760
dev_hard_start_xmit+0x1ee/0x4f0
br_dev_queue_push_xmit+0x4d1/0x660
[..]
ip_compute_csum() cannot deal with nonlinear skbs, so avoid it.
After this change, splat is gone and iperf3 is no longer stuck. |
| In the Linux kernel, the following vulnerability has been resolved:
bus: mhi: host: Range check CHDBOFF and ERDBOFF
If the value read from the CHDBOFF and ERDBOFF registers is outside the
range of the MHI register space then an invalid address might be computed
which later causes a kernel panic. Range check the read value to prevent
a crash due to bad data from the device. |
| In the Linux kernel, the following vulnerability has been resolved:
fprobe: Release rethook after the ftrace_ops is unregistered
While running bpf selftests it's possible to get following fault:
general protection fault, probably for non-canonical address \
0x6b6b6b6b6b6b6b6b: 0000 [#1] PREEMPT SMP DEBUG_PAGEALLOC NOPTI
...
Call Trace:
<TASK>
fprobe_handler+0xc1/0x270
? __pfx_bpf_testmod_init+0x10/0x10
? __pfx_bpf_testmod_init+0x10/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_fentry_test1+0x5/0x10
? bpf_testmod_init+0x22/0x80
? do_one_initcall+0x63/0x2e0
? rcu_is_watching+0xd/0x40
? kmalloc_trace+0xaf/0xc0
? do_init_module+0x60/0x250
? __do_sys_finit_module+0xac/0x120
? do_syscall_64+0x37/0x90
? entry_SYSCALL_64_after_hwframe+0x72/0xdc
</TASK>
In unregister_fprobe function we can't release fp->rethook while it's
possible there are some of its users still running on another cpu.
Moving rethook_free call after fp->ops is unregistered with
unregister_ftrace_function call. |
| In the Linux kernel, the following vulnerability has been resolved:
net: bcmgenet: Add a check for oversized packets
Occasionnaly we may get oversized packets from the hardware which
exceed the nomimal 2KiB buffer size we allocate SKBs with. Add an early
check which drops the packet to avoid invoking skb_over_panic() and move
on to processing the next packet. |
| In the Linux kernel, the following vulnerability has been resolved:
jbd2: check 'jh->b_transaction' before removing it from checkpoint
Following process will corrupt ext4 image:
Step 1:
jbd2_journal_commit_transaction
__jbd2_journal_insert_checkpoint(jh, commit_transaction)
// Put jh into trans1->t_checkpoint_list
journal->j_checkpoint_transactions = commit_transaction
// Put trans1 into journal->j_checkpoint_transactions
Step 2:
do_get_write_access
test_clear_buffer_dirty(bh) // clear buffer dirty，set jbd dirty
__jbd2_journal_file_buffer(jh, transaction) // jh belongs to trans2
Step 3:
drop_cache
journal_shrink_one_cp_list
jbd2_journal_try_remove_checkpoint
if (!trylock_buffer(bh)) // lock bh, true
if (buffer_dirty(bh)) // buffer is not dirty
__jbd2_journal_remove_checkpoint(jh)
// remove jh from trans1->t_checkpoint_list
Step 4:
jbd2_log_do_checkpoint
trans1 = journal->j_checkpoint_transactions
// jh is not in trans1->t_checkpoint_list
jbd2_cleanup_journal_tail(journal) // trans1 is done
Step 5: Power cut, trans2 is not committed, jh is lost in next mounting.
Fix it by checking 'jh->b_transaction' before remove it from checkpoint. |
| In the Linux kernel, the following vulnerability has been resolved:
virtio_net: Fix error unwinding of XDP initialization
When initializing XDP in virtnet_open(), some rq xdp initialization
may hit an error causing net device open failed. However, previous
rqs have already initialized XDP and enabled NAPI, which is not the
expected behavior. Need to roll back the previous rq initialization
to avoid leaks in error unwinding of init code.
Also extract helper functions of disable and enable queue pairs.
Use newly introduced disable helper function in error unwinding and
virtnet_close. Use enable helper function in virtnet_open. |
| In the Linux kernel, the following vulnerability has been resolved:
ubi: ubi_wl_put_peb: Fix infinite loop when wear-leveling work failed
Following process will trigger an infinite loop in ubi_wl_put_peb():
ubifs_bgt ubi_bgt
ubifs_leb_unmap
ubi_leb_unmap
ubi_eba_unmap_leb
ubi_wl_put_peb wear_leveling_worker
e1 = rb_entry(rb_first(&ubi->used)
e2 = get_peb_for_wl(ubi)
ubi_io_read_vid_hdr // return err (flash fault)
out_error:
ubi->move_from = ubi->move_to = NULL
wl_entry_destroy(ubi, e1)
ubi->lookuptbl[e->pnum] = NULL
retry:
e = ubi->lookuptbl[pnum]; // return NULL
if (e == ubi->move_from) { // NULL == NULL gets true
goto retry; // infinite loop !!!
$ top
PID USER PR NI VIRT RES SHR S %CPU %MEM COMMAND
7676 root 20 0 0 0 0 R 100.0 0.0 ubifs_bgt0_0
Fix it by:
1) Letting ubi_wl_put_peb() returns directly if wearl leveling entry has
been removed from 'ubi->lookuptbl'.
2) Using 'ubi->wl_lock' protecting wl entry deletion to preventing an
use-after-free problem for wl entry in ubi_wl_put_peb().
Fetch a reproducer in [Link]. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: improve error handling from ext4_dirhash()
The ext4_dirhash() will *almost* never fail, especially when the hash
tree feature was first introduced. However, with the addition of
support of encrypted, casefolded file names, that function can most
certainly fail today.
So make sure the callers of ext4_dirhash() properly check for
failures, and reflect the errors back up to their callers. |
| In the Linux kernel, the following vulnerability has been resolved:
skbuff: Fix a race between coalescing and releasing SKBs
Commit 1effe8ca4e34 ("skbuff: fix coalescing for page_pool fragment
recycling") allowed coalescing to proceed with non page pool page and page
pool page when @from is cloned, i.e.
to->pp_recycle --> false
from->pp_recycle --> true
skb_cloned(from) --> true
However, it actually requires skb_cloned(@from) to hold true until
coalescing finishes in this situation. If the other cloned SKB is
released while the merging is in process, from_shinfo->nr_frags will be
set to 0 toward the end of the function, causing the increment of frag
page _refcount to be unexpectedly skipped resulting in inconsistent
reference counts. Later when SKB(@to) is released, it frees the page
directly even though the page pool page is still in use, leading to
use-after-free or double-free errors. So it should be prohibited.
The double-free error message below prompted us to investigate:
BUG: Bad page state in process swapper/1 pfn:0e0d1
page:00000000c6548b28 refcount:-1 mapcount:0 mapping:0000000000000000
index:0x2 pfn:0xe0d1
flags: 0xfffffc0000000(node=0|zone=1|lastcpupid=0x1fffff)
raw: 000fffffc0000000 0000000000000000 ffffffff00000101 0000000000000000
raw: 0000000000000002 0000000000000000 ffffffffffffffff 0000000000000000
page dumped because: nonzero _refcount
CPU: 1 PID: 0 Comm: swapper/1 Tainted: G E 6.2.0+
Call Trace:
<IRQ>
dump_stack_lvl+0x32/0x50
bad_page+0x69/0xf0
free_pcp_prepare+0x260/0x2f0
free_unref_page+0x20/0x1c0
skb_release_data+0x10b/0x1a0
napi_consume_skb+0x56/0x150
net_rx_action+0xf0/0x350
? __napi_schedule+0x79/0x90
__do_softirq+0xc8/0x2b1
__irq_exit_rcu+0xb9/0xf0
common_interrupt+0x82/0xa0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:default_idle+0xb/0x20 |
| In the Linux kernel, the following vulnerability has been resolved:
veth: Fix use after free in XDP_REDIRECT
Commit 718a18a0c8a6 ("veth: Rework veth_xdp_rcv_skb in order
to accept non-linear skb") introduced a bug where it tried to
use pskb_expand_head() if the headroom was less than
XDP_PACKET_HEADROOM. This however uses kmalloc to expand the head,
which will later allow consume_skb() to free the skb while is it still
in use by AF_XDP.
Previously if the headroom was less than XDP_PACKET_HEADROOM we
continued on to allocate a new skb from pages so this restores that
behavior.
BUG: KASAN: use-after-free in __xsk_rcv+0x18d/0x2c0
Read of size 78 at addr ffff888976250154 by task napi/iconduit-g/148640
CPU: 5 PID: 148640 Comm: napi/iconduit-g Kdump: loaded Tainted: G O 6.1.4-cloudflare-kasan-2023.1.2 #1
Hardware name: Quanta Computer Inc. QuantaPlex T41S-2U/S2S-MB, BIOS S2S_3B10.03 06/21/2018
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x48
print_report+0x170/0x473
? __xsk_rcv+0x18d/0x2c0
kasan_report+0xad/0x130
? __xsk_rcv+0x18d/0x2c0
kasan_check_range+0x149/0x1a0
memcpy+0x20/0x60
__xsk_rcv+0x18d/0x2c0
__xsk_map_redirect+0x1f3/0x490
? veth_xdp_rcv_skb+0x89c/0x1ba0 [veth]
xdp_do_redirect+0x5ca/0xd60
veth_xdp_rcv_skb+0x935/0x1ba0 [veth]
? __netif_receive_skb_list_core+0x671/0x920
? veth_xdp+0x670/0x670 [veth]
veth_xdp_rcv+0x304/0xa20 [veth]
? do_xdp_generic+0x150/0x150
? veth_xdp_rcv_one+0xde0/0xde0 [veth]
? _raw_spin_lock_bh+0xe0/0xe0
? newidle_balance+0x887/0xe30
? __perf_event_task_sched_in+0xdb/0x800
veth_poll+0x139/0x571 [veth]
? veth_xdp_rcv+0xa20/0xa20 [veth]
? _raw_spin_unlock+0x39/0x70
? finish_task_switch.isra.0+0x17e/0x7d0
? __switch_to+0x5cf/0x1070
? __schedule+0x95b/0x2640
? io_schedule_timeout+0x160/0x160
__napi_poll+0xa1/0x440
napi_threaded_poll+0x3d1/0x460
? __napi_poll+0x440/0x440
? __kthread_parkme+0xc6/0x1f0
? __napi_poll+0x440/0x440
kthread+0x2a2/0x340
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x22/0x30
</TASK>
Freed by task 148640:
kasan_save_stack+0x23/0x50
kasan_set_track+0x21/0x30
kasan_save_free_info+0x2a/0x40
____kasan_slab_free+0x169/0x1d0
slab_free_freelist_hook+0xd2/0x190
__kmem_cache_free+0x1a1/0x2f0
skb_release_data+0x449/0x600
consume_skb+0x9f/0x1c0
veth_xdp_rcv_skb+0x89c/0x1ba0 [veth]
veth_xdp_rcv+0x304/0xa20 [veth]
veth_poll+0x139/0x571 [veth]
__napi_poll+0xa1/0x440
napi_threaded_poll+0x3d1/0x460
kthread+0x2a2/0x340
ret_from_fork+0x22/0x30
The buggy address belongs to the object at ffff888976250000
which belongs to the cache kmalloc-2k of size 2048
The buggy address is located 340 bytes inside of
2048-byte region [ffff888976250000, ffff888976250800)
The buggy address belongs to the physical page:
page:00000000ae18262a refcount:2 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x976250
head:00000000ae18262a order:3 compound_mapcount:0 compound_pincount:0
flags: 0x2ffff800010200(slab|head|node=0|zone=2|lastcpupid=0x1ffff)
raw: 002ffff800010200 0000000000000000 dead000000000122 ffff88810004cf00
raw: 0000000000000000 0000000080080008 00000002ffffffff 0000000000000000
page dumped because: kasan: bad access detected
Memory state around the buggy address:
ffff888976250000: fa fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888976250080: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
> ffff888976250100: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
^
ffff888976250180: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb
ffff888976250200: fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb fb |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: fix UaF in listener shutdown
As reported by Christoph after having refactored the passive
socket initialization, the mptcp listener shutdown path is prone
to an UaF issue.
BUG: KASAN: use-after-free in _raw_spin_lock_bh+0x73/0xe0
Write of size 4 at addr ffff88810cb23098 by task syz-executor731/1266
CPU: 1 PID: 1266 Comm: syz-executor731 Not tainted 6.2.0-rc59af4eaa31c1f6c00c8f1e448ed99a45c66340dd5 #6
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.13.0-0-gf21b5a4aeb02-prebuilt.qemu.org 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x6e/0x91
print_report+0x16a/0x46f
kasan_report+0xad/0x130
kasan_check_range+0x14a/0x1a0
_raw_spin_lock_bh+0x73/0xe0
subflow_error_report+0x6d/0x110
sk_error_report+0x3b/0x190
tcp_disconnect+0x138c/0x1aa0
inet_child_forget+0x6f/0x2e0
inet_csk_listen_stop+0x209/0x1060
__mptcp_close_ssk+0x52d/0x610
mptcp_destroy_common+0x165/0x640
mptcp_destroy+0x13/0x80
__mptcp_destroy_sock+0xe7/0x270
__mptcp_close+0x70e/0x9b0
mptcp_close+0x2b/0x150
inet_release+0xe9/0x1f0
__sock_release+0xd2/0x280
sock_close+0x15/0x20
__fput+0x252/0xa20
task_work_run+0x169/0x250
exit_to_user_mode_prepare+0x113/0x120
syscall_exit_to_user_mode+0x1d/0x40
do_syscall_64+0x48/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
The msk grace period can legitly expire in between the last
reference count dropped in mptcp_subflow_queue_clean() and
the later eventual access in inet_csk_listen_stop()
After the previous patch we don't need anymore special-casing
msk listener socket cleanup: the mptcp worker will process each
of the unaccepted msk sockets.
Just drop the now unnecessary code.
Please note this commit depends on the two parent ones:
mptcp: refactor passive socket initialization
mptcp: use the workqueue to destroy unaccepted sockets |
