Export limit exceeded: 416339 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (416339 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-93847 | 1 Mattermost | 1 Mattermost | 2026-10-26 | 3.5 Low |
| Mattermost versions 11.7.x <= 11.7.10 fail to validate reserved system post types on the scheduled post creation and publication paths which allows an authenticated channel member to publish messages rendering as trusted system events via the scheduled post endpoint.. Mattermost Advisory ID: MMSA-2026-00732 | ||||
| CVE-2026-81039 | 1 Zephyrproject | 1 Zephyr | 2026-10-26 | 4.3 Medium |
| The Bluetooth host pre-allocates a bt_conn object (a "reservation") from the fixed acl_conns[] pool for every connectable advertising set it starts, in le_adv_start_add_conn() in subsys/bluetooth/host/adv.c. When an incoming peripheral connection completes, find_pending_connect() in subsys/bluetooth/host/hci_core.c looked that reservation up using only the identity and the peer address, with a directed-then-undirected fallback, and had no knowledge of which advertising set actually terminated. With CONFIG_BT_EXT_ADV_MAX_ADV_SET > 1, where the LE Enhanced Connection Complete event is cached until the LE Advertising Set Terminated event identifies the set, this lookup can return the reservation belonging to a different, still-running advertising set. The defect is reachable over the air by any adjacent device. If an application runs two connectable extended advertising sets on the same identity — one undirected and one directed at a peer P (the common "directed reconnect to a bonded central while still accepting new centrals" pattern) — a remote initiator whose address maps to P connecting on the undirected set causes the directed set's reservation to be consumed instead. The initiator address is chosen freely by the remote device and is not authenticated at link establishment, so no bonding, pairing or prior relationship is required to trigger the mis-attribution. The undirected set's own reservation is then stranded: its BT_ADV_ENABLED flag has already been cleared, and le_adv_stop_free_conn() — the only path that returns a reservation to the pool — is reached only for sets that are still enabled, so bt_le_ext_adv_stop() returns early and the object is never released. Each occurrence permanently consumes one CONFIG_BT_MAX_CONN slot until bt_disable() or reboot. In application patterns that restart the directed advertising set after each disconnect, an attacker can repeat the sequence until the pool is exhausted, after which connectable advertising fails with -ENOMEM and the device can no longer accept connections. As a side effect the directed set keeps advertising without a reservation, so a genuine connection on it is dropped by bt_hci_disconnect(). The impact is availability only; no memory corruption or information disclosure results, and configurations with a single advertising set are unaffected. | ||||
| CVE-2026-113078 | 1 Google | 1 Chrome | 2026-10-26 | 9.6 Critical |
| Improper input validation in Compositing in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code outside the sandbox via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-115418 | 1 Aws | 1 Aws-cdk Aws-redshift-alpha | 2026-10-26 | 7.3 High |
| SQL injection in the database-query custom resource handlers in the Amazon Web Services (AWS) Cloud Development Kit (CDK) @aws-cdk/aws-redshift-alpha module before 2.274.0-alpha.0 could allow a third party who can influence construct property values to run SQL statements with Amazon Redshift superuser privileges, including granting access to all cluster users. The statements are reachable through crafted user names, comments, or passwords. To remediate this issue, users should upgrade to version 2.274.0-alpha.0 or later and review existing table grants to PUBLIC. | ||||
| CVE-2026-113079 | 1 Google | 1 Chrome | 2026-10-26 | 8.8 High |
| Use after free in SiteIsolation in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to potentially execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Medium) | ||||
| CVE-2026-113080 | 1 Google | 1 Chrome | 2026-10-26 | 8.8 High |
| Use after free in WebAppInstalls in Google Chrome prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-113082 | 2 Google, Microsoft | 2 Chrome, Windows | 2026-10-26 | 6.5 Medium |
| Memory corruption in ANGLE in Google Chrome on on Windows prior to 156.0.8078.47 allowed a remote attacker to potentially read memory inside the sandbox via a crafted HTML page. (Chromium security severity: High) | ||||
| CVE-2026-113083 | 1 Google | 2 Android, Chrome | 2026-10-26 | 8.8 High |
| Memory corruption in Actor in Google Chrome on on Android prior to 156.0.8078.47 allowed a remote attacker to execute arbitrary code inside the sandbox via a crafted HTML page. (Chromium security severity: Low) | ||||
| CVE-2026-98119 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: break unbuffered write when netfs_alloc_subrequest() fails syzbot reported a null-ptr-deref below [1] following a fault injection in netfs_alloc_subrequest(). [0] When netfs_alloc_subrequest() fails, subreq is NULL. Later, netfs_prepare_write() tries to initialize members of subreq(e.g., source), the issue in [1] is triggered. Let's handle the error of netfs_prepare_write() properly. [0] FAULT_INJECTION: forcing a failure. name failslab, interval 1, probability 0, space 0, times 0 Call Trace: netfs_alloc_subrequest+0x116/0x3f0 netfs_prepare_write+0x76/0x7b0 netfs_unbuffered_write+0x75c/0x2020 netfs_unbuffered_write_iter_locked+0x7d6/0xa80 netfs_unbuffered_write_iter+0x442/0x720 v9fs_file_write_iter+0xbf/0x100 vfs_write+0x6ac/0x1050 [1] KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af] RIP: 0010:netfs_prepare_write+0xbc/0x7b0 fs/netfs/write_issue.c:173 Call Trace: netfs_unbuffered_write+0x75c/0x2020 fs/netfs/direct_write.c:111 netfs_unbuffered_write_iter_locked+0x7d6/0xa80 fs/netfs/direct_write.c:290 netfs_unbuffered_write_iter+0x442/0x720 fs/netfs/direct_write.c:382 v9fs_file_write_iter+0xbf/0x100 fs/9p/vfs_file.c:409 new_sync_write fs/read_write.c:595 [inline] | ||||
| CVE-2026-98120 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: netfs: Fix subreq ref leak Fix a subrequest ref leak in netfs_unbuffered_write() in the event that subreq->io_iter ends up zero length during preparation. | ||||
| CVE-2026-98140 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: ntfs: fix kmap_local leak in write_mft_record_nolock() error paths write_mft_record_nolock() maps the MFT record folio with kmap_local_folio(), but the pre_write_mst_fixup() and bio_add_folio() failure paths jump to the error label without unmapping it. kmap_local mappings are stack-ordered per task, so leaking one corrupts the nesting for any outer mapping. Unmap the folio on those error paths too. | ||||
| CVE-2026-98143 | 1 Linux | 1 Linux Kernel | 2026-10-26 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: accel: ethosu: Don't read the U65 rounding mode as a storage mode Bits 15:14 of NPU_SET_{IFM,OFM}_PRECISION select the activation storage mode on U85 only. On U65 the same field holds the rounding mode, and the command stream parser has read it as a storage mode since the driver was added. That went unnoticed while unknown values fell through the switch, but now that they are rejected, every U65 command stream that asks for natural rounding (2) fails CMDSTREAM_BO_CREATE with -EINVAL. Mesa emits it for average pooling, concatenation, split, unpack, strided slice, LUT and argmax, which is 72 failures of the Teflon test suite on an i.MX93. Truncating rounding (1) is misread as well: it picks the two-tile address path and computes a bogus feature map size from tile bases the command stream never set. Read the field as a storage mode only on the hardware where it is one. | ||||
| CVE-2026-111404 | 2 Villatheme, Wordpress-extensions | 2 Photo Reviews For Woocommerce, Photo Reviews For Woocommerce | 2026-10-26 | 3.7 Low |
| Concurrent Execution using Shared Resource with Improper Synchronization ('Race Condition') vulnerability in VillaTheme Photo Reviews for WooCommerce woo-photo-reviews allows Leveraging Race Conditions.This issue affects Photo Reviews for WooCommerce: from n/a through 1.2.31. | ||||
| CVE-2026-105765 | 1 Hashicorp | 2 Consul, Consul Enterprise | 2026-10-26 | 7.5 High |
| HashiCorp Consul and Consul Enterprise 1.17.0 up to 2.0.4 are vulnerable to an authorization bypass in the agent's service mesh leaf certificate API that may allow an attacker without a valid ACL token to retrieve a cached service leaf certificate and its private key. This vulnerability (CVE-2026-105765) is fixed in Consul Community Edition 2.1.0 and Consul Enterprise 2.1.0 and 1.21.19. | ||||
| CVE-2026-115910 | 1 Python-social-auth | 1 Social-core | 2026-10-26 | 6.8 Medium |
| Python Social Auth is a social authentication and registration mechanism. Prior to 6.2.0, OpenIdConnectAuth in social_core/backends/open_id_connect.py uses get_and_store_nonce to place the OpenID Connect nonce in a shared OpenIdConnectAssociation table, and get_nonce and validate_claims verify only that the nonce exists and has not expired rather than binding it to the browser session and OAuth state that initiated the login. An attacker who obtains a victim's unused authorization code can start a separate login to obtain valid state for the attacker's browser, submit the victim's code with that state, and pass nonce validation because the victim nonce is globally available. With DEFAULT_USE_PKCE disabled in the default OpenIdConnectAuth configuration, the attacker can be logged in as the victim. This issue is fixed in version 6.2.0. | ||||
| CVE-2026-116471 | 1 Bkwld | 1 Decoy | 2026-10-26 | 4.3 Medium |
| A security flaw has been discovered in BKWLD Decoy up to 5.11.1. The impacted element is an unknown function of the file Policy.php of the component Authorization Policy. The manipulation of the argument role results in improper privilege management. The attack may be performed from remote. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. | ||||
| CVE-2026-93441 | 1 Ibm | 1 Qradar Security Information And Event Management | 2026-10-26 | 8.6 High |
| IBM QRadar SIEM could allow a remote attacker to cause a denial of service due to uncontrolled resource consumption. | ||||
| CVE-2026-92824 | 2 Red Hat, Redhat | 6 Enterprise Linux, Enterprise Linux, Hardened Images and 3 more | 2026-10-26 | 6.2 Medium |
| A flaw was found in libmodulemd. In the module stream v2 rpm-map emission path, an inner loop incorrectly uses the count of digest algorithms as its bound instead of the number of checksums in the current digest table. Crafted modulemd v2 metadata with multiple digest types can trigger an out-of-bounds read during YAML serialization, typically causing a crash and resulting in a denial of service. | ||||
| CVE-2026-82390 | 1 Zephyrproject | 1 Zephyr | 2026-10-26 | 3.7 Low |
| The Espressif AES driver drivers/crypto/crypto_esp32_aes.c advertises a multi-session cipher API — it hands out up to CONFIG_ESP32_CRYPTO_AES_SESSIONS_MAX (default 4) independent sessions, each carrying its own key and direction. The AES peripheral, however, has a single chip-global set of key and mode registers, and aes_begin_session() programmed them exactly once, at session start, outside the aes_lock mutex that serialises the transforms. The per-operation handlers aes_ecb_op(), aes_cbc_op() and aes_ctr_op() then ran aes_hal_transform_block() against whatever key and direction the registers happened to hold. As a result, once a second session is opened with a different key, every subsequent operation on the first session silently uses the second session's key and direction, and no error is reported. Because the key programming happened outside the lock, the correct usage pattern of "each thread does begin, then op, then free on its own session" also races: a second thread's cipher_begin_session() landing between the first thread's begin and its operation makes that operation run under the second thread's key. An attacker who can induce session creation on the device — for example a protocol peer whose connection causes a session key to be installed — can influence which key is resident when a victim operation runs. The impact is a cryptographic failure rather than memory corruption: data the application believed it was protecting under one key is encrypted or decrypted under another. Where the resident key is one the attacker knows or supplied, the affected plaintext becomes recoverable by that attacker, and the operation's direction (encrypt versus decrypt) can likewise be inverted. Exposure requires an application that holds two or more concurrent sessions with different keys against this driver; no in-tree Zephyr subsystem does so today (the 802.15.4 security layer, which does open two sessions, uses CCM mode, which this driver rejects), so the risk falls on application code that uses the documented multi-session API. The fix removes all hardware access from aes_begin_session() and reprograms the key and direction at the top of every operation, inside aes_lock, so the chip-global registers can no longer be observed stale by another session. | ||||
| CVE-2026-82389 | 1 Zephyrproject | 1 Zephyr | 2026-10-26 | 6.5 Medium |
| In the Bluetooth Classic Hands-Free Profile Audio Gateway role, hfp_ag_create() in subsys/bluetooth/host/classic/hfp_ag.c starts an SDP discovery toward the peer, which links the embedded ag->sdp_param._node into the SDP client's pending request list in subsys/bluetooth/host/classic/sdp.c. If the subsequent bt_rfcomm_dlc_connect() call fails, bt_hfp_ag_connect() cleaned up by memset()-ing the entire AG object while that node was still linked, and while ag->slc_work could still be queued on the system work queue. An in-flight SDP discovery cannot be cancelled — bt_sdp_discover_cancel() is declared in the public header but has no implementation — so the request stays in the list with its func, pool and uuid pointers zeroed. The RFCOMM channel passed to bt_hfp_ag_connect() is taken from the peer's own SDP Hands-Free service record in the normal AG flow (bt_sdp_get_proto_param() performs no range validation, and samples/bluetooth/classic/handsfree_ag feeds the value straight through), so a remote BR/EDR device in radio range that advertises an RFCOMM channel outside the valid range 0x01..0x1e deterministically forces bt_rfcomm_dlc_connect() to fail and reach the wipe. Reading the peer's SDP record requires no pairing, and the peer can also trigger the failure by dropping the ACL or racing an RFCOMM DLC on the same DLCI at the right moment. When the SDP client next advances its request list, sdp_client_discover() dereferences the zeroed parameters — net_buf_alloc(param->pool, …) with a NULL pool and param->uuid->type — and the result-notification paths call through the NULL params->func. Zeroing a linked node also truncates the request list behind a stale tail pointer, and re-arming the freed AG slot re-appends the same node and can produce a self-looping list that hangs the Bluetooth RX thread. The impact is a crash or hang of the Bluetooth stack; the written value is a constant zero at a fixed static address, so no attacker-controlled write is available. Only builds with CONFIG_BT_CLASSIC and CONFIG_BT_HFP_AG that use the Audio Gateway role are affected. | ||||