| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/ism: fix concurrency management in ism_cmd()
The s390x ISM device data sheet clearly states that only one
request-response sequence is allowable per ISM function at any point in
time. Unfortunately as of today the s390/ism driver in Linux does not
honor that requirement. This patch aims to rectify that.
This problem was discovered based on Aliaksei's bug report which states
that for certain workloads the ISM functions end up entering error state
(with PEC 2 as seen from the logs) after a while and as a consequence
connections handled by the respective function break, and for future
connection requests the ISM device is not considered -- given it is in a
dysfunctional state. During further debugging PEC 3A was observed as
well.
A kernel message like
[ 1211.244319] zpci: 061a:00:00.0: Event 0x2 reports an error for PCI function 0x61a
is a reliable indicator of the stated function entering error state
with PEC 2. Let me also point out that a kernel message like
[ 1211.244325] zpci: 061a:00:00.0: The ism driver bound to the device does not support error recovery
is a reliable indicator that the ISM function won't be auto-recovered
because the ISM driver currently lacks support for it.
On a technical level, without this synchronization, commands (inputs to
the FW) may be partially or fully overwritten (corrupted) by another CPU
trying to issue commands on the same function. There is hard evidence that
this can lead to DMB token values being used as DMB IOVAs, leading to
PEC 2 PCI events indicating invalid DMA. But this is only one of the
failure modes imaginable. In theory even completely losing one command
and executing another one twice and then trying to interpret the outputs
as if the command we intended to execute was actually executed and not
the other one is also possible. Frankly, I don't feel confident about
providing an exhaustive list of possible consequences. |
| In the Linux kernel, the following vulnerability has been resolved:
vsock/virtio: Validate length in packet header before skb_put()
When receiving a vsock packet in the guest, only the virtqueue buffer
size is validated prior to virtio_vsock_skb_rx_put(). Unfortunately,
virtio_vsock_skb_rx_put() uses the length from the packet header as the
length argument to skb_put(), potentially resulting in SKB overflow if
the host has gone wonky.
Validate the length as advertised by the packet header before calling
virtio_vsock_skb_rx_put(). |
| In the Linux kernel, the following vulnerability has been resolved:
net, hsr: reject HSR frame if skb can't hold tag
Receiving HSR frame with insufficient space to hold HSR tag in the skb
can result in a crash (kernel BUG):
[ 45.390915] skbuff: skb_under_panic: text:ffffffff86f32cac len:26 put:14 head:ffff888042418000 data:ffff888042417ff4 tail:0xe end:0x180 dev:bridge_slave_1
[ 45.392559] ------------[ cut here ]------------
[ 45.392912] kernel BUG at net/core/skbuff.c:211!
[ 45.393276] Oops: invalid opcode: 0000 [#1] SMP DEBUG_PAGEALLOC KASAN NOPTI
[ 45.393809] CPU: 1 UID: 0 PID: 2496 Comm: reproducer Not tainted 6.15.0 #12 PREEMPT(undef)
[ 45.394433] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.3-0-ga6ed6b701f0a-prebuilt.qemu.org 04/01/2014
[ 45.395273] RIP: 0010:skb_panic+0x15b/0x1d0
<snip registers, remove unreliable trace>
[ 45.402911] Call Trace:
[ 45.403105] <IRQ>
[ 45.404470] skb_push+0xcd/0xf0
[ 45.404726] br_dev_queue_push_xmit+0x7c/0x6c0
[ 45.406513] br_forward_finish+0x128/0x260
[ 45.408483] __br_forward+0x42d/0x590
[ 45.409464] maybe_deliver+0x2eb/0x420
[ 45.409763] br_flood+0x174/0x4a0
[ 45.410030] br_handle_frame_finish+0xc7c/0x1bc0
[ 45.411618] br_handle_frame+0xac3/0x1230
[ 45.413674] __netif_receive_skb_core.constprop.0+0x808/0x3df0
[ 45.422966] __netif_receive_skb_one_core+0xb4/0x1f0
[ 45.424478] __netif_receive_skb+0x22/0x170
[ 45.424806] process_backlog+0x242/0x6d0
[ 45.425116] __napi_poll+0xbb/0x630
[ 45.425394] net_rx_action+0x4d1/0xcc0
[ 45.427613] handle_softirqs+0x1a4/0x580
[ 45.427926] do_softirq+0x74/0x90
[ 45.428196] </IRQ>
This issue was found by syzkaller.
The panic happens in br_dev_queue_push_xmit() once it receives a
corrupted skb with ETH header already pushed in linear data. When it
attempts the skb_push() call, there's not enough headroom and
skb_push() panics.
The corrupted skb is put on the queue by HSR layer, which makes a
sequence of unintended transformations when it receives a specific
corrupted HSR frame (with incomplete TAG).
Fix it by dropping and consuming frames that are not long enough to
contain both ethernet and hsr headers.
Alternative fix would be to check for enough headroom before skb_push()
in br_dev_queue_push_xmit().
In the reproducer, this is injected via AF_PACKET, but I don't easily
see why it couldn't be sent over the wire from adjacent network.
Further Details:
In the reproducer, the following network interface chain is set up:
┌────────────────┐ ┌────────────────┐
│ veth0_to_hsr ├───┤ hsr_slave0 ┼───┐
└────────────────┘ └────────────────┘ │
│ ┌──────┐
├─┤ hsr0 ├───┐
│ └──────┘ │
┌────────────────┐ ┌────────────────┐ │ │┌────────┐
│ veth1_to_hsr ┼───┤ hsr_slave1 ├───┘ └┤ │
└────────────────┘ └────────────────┘ ┌┼ bridge │
││ │
│└────────┘
│
┌───────┐ │
│ ... ├──────┘
└───────┘
To trigger the events leading up to crash, reproducer sends a corrupted
HSR fr
---truncated--- |
| In the Linux kernel, the following vulnerability has been resolved:
ipv6: sr: Fix MAC comparison to be constant-time
To prevent timing attacks, MACs need to be compared in constant time.
Use the appropriate helper function for this. |
| In the Linux kernel, the following vulnerability has been resolved:
fs/buffer: fix use-after-free when call bh_read() helper
There's issue as follows:
BUG: KASAN: stack-out-of-bounds in end_buffer_read_sync+0xe3/0x110
Read of size 8 at addr ffffc9000168f7f8 by task swapper/3/0
CPU: 3 UID: 0 PID: 0 Comm: swapper/3 Not tainted 6.16.0-862.14.0.6.x86_64
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<IRQ>
dump_stack_lvl+0x55/0x70
print_address_description.constprop.0+0x2c/0x390
print_report+0xb4/0x270
kasan_report+0xb8/0xf0
end_buffer_read_sync+0xe3/0x110
end_bio_bh_io_sync+0x56/0x80
blk_update_request+0x30a/0x720
scsi_end_request+0x51/0x2b0
scsi_io_completion+0xe3/0x480
? scsi_device_unbusy+0x11e/0x160
blk_complete_reqs+0x7b/0x90
handle_softirqs+0xef/0x370
irq_exit_rcu+0xa5/0xd0
sysvec_apic_timer_interrupt+0x6e/0x90
</IRQ>
Above issue happens when do ntfs3 filesystem mount, issue may happens
as follows:
mount IRQ
ntfs_fill_super
read_cache_page
do_read_cache_folio
filemap_read_folio
mpage_read_folio
do_mpage_readpage
ntfs_get_block_vbo
bh_read
submit_bh
wait_on_buffer(bh);
blk_complete_reqs
scsi_io_completion
scsi_end_request
blk_update_request
end_bio_bh_io_sync
end_buffer_read_sync
__end_buffer_read_notouch
unlock_buffer
wait_on_buffer(bh);--> return will return to caller
put_bh
--> trigger stack-out-of-bounds
In the mpage_read_folio() function, the stack variable 'map_bh' is
passed to ntfs_get_block_vbo(). Once unlock_buffer() unlocks and
wait_on_buffer() returns to continue processing, the stack variable
is likely to be reclaimed. Consequently, during the end_buffer_read_sync()
process, calling put_bh() may result in stack overrun.
If the bh is not allocated on the stack, it belongs to a folio. Freeing
a buffer head which belongs to a folio is done by drop_buffers() which
will fail to free buffers which are still locked. So it is safe to call
put_bh() before __end_buffer_read_notouch(). |
| In the Linux kernel, the following vulnerability has been resolved:
nfsd: allow SC_STATUS_FREEABLE when searching via nfs4_lookup_stateid()
The pynfs DELEG8 test fails when run against nfsd. It acquires a
delegation and then lets the lease time out. It then tries to use the
deleg stateid and expects to see NFS4ERR_DELEG_REVOKED, but it gets
bad NFS4ERR_BAD_STATEID instead.
When a delegation is revoked, it's initially marked with
SC_STATUS_REVOKED, or SC_STATUS_ADMIN_REVOKED and later, it's marked
with the SC_STATUS_FREEABLE flag, which denotes that it is waiting for
s FREE_STATEID call.
nfs4_lookup_stateid() accepts a statusmask that includes the status
flags that a found stateid is allowed to have. Currently, that mask
never includes SC_STATUS_FREEABLE, which means that revoked delegations
are (almost) never found.
Add SC_STATUS_FREEABLE to the always-allowed status flags, and remove it
from nfsd4_delegreturn() since it's now always implied. |
| In the Linux kernel, the following vulnerability has been resolved:
net/sched: Fix backlog accounting in qdisc_dequeue_internal
This issue applies for the following qdiscs: hhf, fq, fq_codel, and
fq_pie, and occurs in their change handlers when adjusting to the new
limit. The problem is the following in the values passed to the
subsequent qdisc_tree_reduce_backlog call given a tbf parent:
When the tbf parent runs out of tokens, skbs of these qdiscs will
be placed in gso_skb. Their peek handlers are qdisc_peek_dequeued,
which accounts for both qlen and backlog. However, in the case of
qdisc_dequeue_internal, ONLY qlen is accounted for when pulling
from gso_skb. This means that these qdiscs are missing a
qdisc_qstats_backlog_dec when dropping packets to satisfy the
new limit in their change handlers.
One can observe this issue with the following (with tc patched to
support a limit of 0):
export TARGET=fq
tc qdisc del dev lo root
tc qdisc add dev lo root handle 1: tbf rate 8bit burst 100b latency 1ms
tc qdisc replace dev lo handle 3: parent 1:1 $TARGET limit 1000
echo ''; echo 'add child'; tc -s -d qdisc show dev lo
ping -I lo -f -c2 -s32 -W0.001 127.0.0.1 2>&1 >/dev/null
echo ''; echo 'after ping'; tc -s -d qdisc show dev lo
tc qdisc change dev lo handle 3: parent 1:1 $TARGET limit 0
echo ''; echo 'after limit drop'; tc -s -d qdisc show dev lo
tc qdisc replace dev lo handle 2: parent 1:1 sfq
echo ''; echo 'post graft'; tc -s -d qdisc show dev lo
The second to last show command shows 0 packets but a positive
number (74) of backlog bytes. The problem becomes clearer in the
last show command, where qdisc_purge_queue triggers
qdisc_tree_reduce_backlog with the positive backlog and causes an
underflow in the tbf parent's backlog (4096 Mb instead of 0).
To fix this issue, the codepath for all clients of qdisc_dequeue_internal
has been simplified: codel, pie, hhf, fq, fq_pie, and fq_codel.
qdisc_dequeue_internal handles the backlog adjustments for all cases that
do not directly use the dequeue handler.
The old fq_codel_change limit adjustment loop accumulated the arguments to
the subsequent qdisc_tree_reduce_backlog call through the cstats field.
However, this is confusing and error prone as fq_codel_dequeue could also
potentially mutate this field (which qdisc_dequeue_internal calls in the
non gso_skb case), so we have unified the code here with other qdiscs. |
| In the Linux kernel, the following vulnerability has been resolved:
ppp: fix race conditions in ppp_fill_forward_path
ppp_fill_forward_path() has two race conditions:
1. The ppp->channels list can change between list_empty() and
list_first_entry(), as ppp_lock() is not held. If the only channel
is deleted in ppp_disconnect_channel(), list_first_entry() may
access an empty head or a freed entry, and trigger a panic.
2. pch->chan can be NULL. When ppp_unregister_channel() is called,
pch->chan is set to NULL before pch is removed from ppp->channels.
Fix these by using a lockless RCU approach:
- Use list_first_or_null_rcu() to safely test and access the first list
entry.
- Convert list modifications on ppp->channels to their RCU variants and
add synchronize_net() after removal.
- Check for a NULL pch->chan before dereferencing it. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/mm: Do not map lowcore with identity mapping
Since the identity mapping is pinned to address zero the lowcore is always
also mapped to address zero, this happens regardless of the relocate_lowcore
command line option. If the option is specified the lowcore is mapped
twice, instead of only once.
This means that NULL pointer accesses will succeed instead of causing an
exception (low address protection still applies, but covers only parts).
To fix this never map the first two pages of physical memory with the
identity mapping. |
| In the Linux kernel, the following vulnerability has been resolved:
io_uring/net: commit partial buffers on retry
Ring provided buffers are potentially only valid within the single
execution context in which they were acquired. io_uring deals with this
and invalidates them on retry. But on the networking side, if
MSG_WAITALL is set, or if the socket is of the streaming type and too
little was processed, then it will hang on to the buffer rather than
recycle or commit it. This is problematic for two reasons:
1) If someone unregisters the provided buffer ring before a later retry,
then the req->buf_list will no longer be valid.
2) If multiple sockers are using the same buffer group, then multiple
receives can consume the same memory. This can cause data corruption
in the application, as either receive could land in the same
userspace buffer.
Fix this by disallowing partial retries from pinning a provided buffer
across multiple executions, if ring provided buffers are used. |
| In the Linux kernel, the following vulnerability has been resolved:
iommufd: Prevent ALIGN() overflow
When allocating IOVA the candidate range gets aligned to the target
alignment. If the range is close to ULONG_MAX then the ALIGN() can
wrap resulting in a corrupted iova.
Open code the ALIGN() using get_add_overflow() to prevent this.
This simplifies the checks as we don't need to check for length earlier
either.
Consolidate the two copies of this code under a single helper.
This bug would allow userspace to create a mapping that overlaps with some
other mapping or a reserved range. |
| In the Linux kernel, the following vulnerability has been resolved:
netfilter: nf_tables: reject duplicate device on updates
A chain/flowtable update with duplicated devices in the same batch is
possible. Unfortunately, netdev event path only removes the first
device that is found, leaving unregistered the hook of the duplicated
device.
Check if a duplicated device exists in the transaction batch, bail out
with EEXIST in such case.
WARNING is hit when unregistering the hook:
[49042.221275] WARNING: CPU: 4 PID: 8425 at net/netfilter/core.c:340 nf_hook_entry_head+0xaa/0x150
[49042.221375] CPU: 4 UID: 0 PID: 8425 Comm: nft Tainted: G S 6.16.0+ #170 PREEMPT(full)
[...]
[49042.221382] RIP: 0010:nf_hook_entry_head+0xaa/0x150 |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Disable migration in nf_hook_run_bpf().
syzbot reported that the netfilter bpf prog can be called without
migration disabled in xmit path.
Then the assertion in __bpf_prog_run() fails, triggering the splat
below. [0]
Let's use bpf_prog_run_pin_on_cpu() in nf_hook_run_bpf().
[0]:
BUG: assuming non migratable context at ./include/linux/filter.h:703
in_atomic(): 0, irqs_disabled(): 0, migration_disabled() 0 pid: 5829, name: sshd-session
3 locks held by sshd-session/5829:
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: lock_sock include/net/sock.h:1667 [inline]
#0: ffff88807b4e4218 (sk_lock-AF_INET){+.+.}-{0:0}, at: tcp_sendmsg+0x20/0x50 net/ipv4/tcp.c:1395
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#1: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: __ip_queue_xmit+0x69/0x26c0 net/ipv4/ip_output.c:470
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_lock_acquire include/linux/rcupdate.h:331 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: rcu_read_lock include/linux/rcupdate.h:841 [inline]
#2: ffffffff8e5c4e00 (rcu_read_lock){....}-{1:3}, at: nf_hook+0xb2/0x680 include/linux/netfilter.h:241
CPU: 0 UID: 0 PID: 5829 Comm: sshd-session Not tainted 6.16.0-rc6-syzkaller-00002-g155a3c003e55 #0 PREEMPT(full)
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 05/07/2025
Call Trace:
<TASK>
__dump_stack lib/dump_stack.c:94 [inline]
dump_stack_lvl+0x16c/0x1f0 lib/dump_stack.c:120
__cant_migrate kernel/sched/core.c:8860 [inline]
__cant_migrate+0x1c7/0x250 kernel/sched/core.c:8834
__bpf_prog_run include/linux/filter.h:703 [inline]
bpf_prog_run include/linux/filter.h:725 [inline]
nf_hook_run_bpf+0x83/0x1e0 net/netfilter/nf_bpf_link.c:20
nf_hook_entry_hookfn include/linux/netfilter.h:157 [inline]
nf_hook_slow+0xbb/0x200 net/netfilter/core.c:623
nf_hook+0x370/0x680 include/linux/netfilter.h:272
NF_HOOK_COND include/linux/netfilter.h:305 [inline]
ip_output+0x1bc/0x2a0 net/ipv4/ip_output.c:433
dst_output include/net/dst.h:459 [inline]
ip_local_out net/ipv4/ip_output.c:129 [inline]
__ip_queue_xmit+0x1d7d/0x26c0 net/ipv4/ip_output.c:527
__tcp_transmit_skb+0x2686/0x3e90 net/ipv4/tcp_output.c:1479
tcp_transmit_skb net/ipv4/tcp_output.c:1497 [inline]
tcp_write_xmit+0x1274/0x84e0 net/ipv4/tcp_output.c:2838
__tcp_push_pending_frames+0xaf/0x390 net/ipv4/tcp_output.c:3021
tcp_push+0x225/0x700 net/ipv4/tcp.c:759
tcp_sendmsg_locked+0x1870/0x42b0 net/ipv4/tcp.c:1359
tcp_sendmsg+0x2e/0x50 net/ipv4/tcp.c:1396
inet_sendmsg+0xb9/0x140 net/ipv4/af_inet.c:851
sock_sendmsg_nosec net/socket.c:712 [inline]
__sock_sendmsg net/socket.c:727 [inline]
sock_write_iter+0x4aa/0x5b0 net/socket.c:1131
new_sync_write fs/read_write.c:593 [inline]
vfs_write+0x6c7/0x1150 fs/read_write.c:686
ksys_write+0x1f8/0x250 fs/read_write.c:738
do_syscall_x64 arch/x86/entry/syscall_64.c:63 [inline]
do_syscall_64+0xcd/0x4c0 arch/x86/entry/syscall_64.c:94
entry_SYSCALL_64_after_hwframe+0x77/0x7f
RIP: 0033:0x7fe7d365d407
Code: 48 89 fa 4c 89 df e8 38 aa 00 00 8b 93 08 03 00 00 59 5e 48 83 f8 fc 74 1a 5b c3 0f 1f 84 00 00 00 00 00 48 8b 44 24 10 0f 05 <5b> c3 0f 1f 80 00 00 00 00 83 e2 39 83 fa 08 75 de e8 23 ff ff ff
RSP: |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath11k: clear initialized flag for deinit-ed srng lists
In a number of cases we see kernel panics on resume due
to ath11k kernel page fault, which happens under the
following circumstances:
1) First ath11k_hal_dump_srng_stats() call
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 22511ms before
ath11k_pci 0000:01:00.0: group_id 1 14440788ms before
[..]
ath11k_pci 0000:01:00.0: failed to receive control response completion, polling..
ath11k_pci 0000:01:00.0: Service connect timeout
ath11k_pci 0000:01:00.0: failed to connect to HTT: -110
ath11k_pci 0000:01:00.0: failed to start core: -110
ath11k_pci 0000:01:00.0: firmware crashed: MHI_CB_EE_RDDM
ath11k_pci 0000:01:00.0: already resetting count 2
ath11k_pci 0000:01:00.0: failed to wait wlan mode request (mode 4): -110
ath11k_pci 0000:01:00.0: qmi failed to send wlan mode off: -110
ath11k_pci 0000:01:00.0: failed to reconfigure driver on crash recovery
[..]
2) At this point reconfiguration fails (we have 2 resets) and
ath11k_core_reconfigure_on_crash() calls ath11k_hal_srng_deinit()
which destroys srng lists. However, it does not reset per-list
->initialized flag.
3) Second ath11k_hal_dump_srng_stats() call sees stale ->initialized
flag and attempts to dump srng stats:
Last interrupt received for each group:
ath11k_pci 0000:01:00.0: group_id 0 66785ms before
ath11k_pci 0000:01:00.0: group_id 1 14485062ms before
ath11k_pci 0000:01:00.0: group_id 2 14485062ms before
ath11k_pci 0000:01:00.0: group_id 3 14485062ms before
ath11k_pci 0000:01:00.0: group_id 4 14780845ms before
ath11k_pci 0000:01:00.0: group_id 5 14780845ms before
ath11k_pci 0000:01:00.0: group_id 6 14485062ms before
ath11k_pci 0000:01:00.0: group_id 7 66814ms before
ath11k_pci 0000:01:00.0: group_id 8 68997ms before
ath11k_pci 0000:01:00.0: group_id 9 67588ms before
ath11k_pci 0000:01:00.0: group_id 10 69511ms before
BUG: unable to handle page fault for address: ffffa007404eb010
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 100000067 P4D 100000067 PUD 10022d067 PMD 100b01067 PTE 0
Oops: 0000 [#1] PREEMPT SMP NOPTI
RIP: 0010:ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k]
Call Trace:
<TASK>
? __die_body+0xae/0xb0
? page_fault_oops+0x381/0x3e0
? exc_page_fault+0x69/0xa0
? asm_exc_page_fault+0x22/0x30
? ath11k_hal_dump_srng_stats+0x2b4/0x3b0 [ath11k (HASH:6cea 4)]
ath11k_qmi_driver_event_work+0xbd/0x1050 [ath11k (HASH:6cea 4)]
worker_thread+0x389/0x930
kthread+0x149/0x170
Clear per-list ->initialized flag in ath11k_hal_srng_deinit(). |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_sync: fix double free in 'hci_discovery_filter_clear()'
Function 'hci_discovery_filter_clear()' frees 'uuids' array and then
sets it to NULL. There is a tiny chance of the following race:
'hci_cmd_sync_work()'
'update_passive_scan_sync()'
'hci_update_passive_scan_sync()'
'hci_discovery_filter_clear()'
kfree(uuids);
<-------------------------preempted-------------------------------->
'start_service_discovery()'
'hci_discovery_filter_clear()'
kfree(uuids); // DOUBLE FREE
<-------------------------preempted-------------------------------->
uuids = NULL;
To fix it let's add locking around 'kfree()' call and NULL pointer
assignment. Otherwise the following backtrace fires:
[ ] ------------[ cut here ]------------
[ ] kernel BUG at mm/slub.c:547!
[ ] Internal error: Oops - BUG: 00000000f2000800 [#1] PREEMPT SMP
[ ] CPU: 3 UID: 0 PID: 246 Comm: bluetoothd Tainted: G O 6.12.19-kernel #1
[ ] Tainted: [O]=OOT_MODULE
[ ] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--)
[ ] pc : __slab_free+0xf8/0x348
[ ] lr : __slab_free+0x48/0x348
...
[ ] Call trace:
[ ] __slab_free+0xf8/0x348
[ ] kfree+0x164/0x27c
[ ] start_service_discovery+0x1d0/0x2c0
[ ] hci_sock_sendmsg+0x518/0x924
[ ] __sock_sendmsg+0x54/0x60
[ ] sock_write_iter+0x98/0xf8
[ ] do_iter_readv_writev+0xe4/0x1c8
[ ] vfs_writev+0x128/0x2b0
[ ] do_writev+0xfc/0x118
[ ] __arm64_sys_writev+0x20/0x2c
[ ] invoke_syscall+0x68/0xf0
[ ] el0_svc_common.constprop.0+0x40/0xe0
[ ] do_el0_svc+0x1c/0x28
[ ] el0_svc+0x30/0xd0
[ ] el0t_64_sync_handler+0x100/0x12c
[ ] el0t_64_sync+0x194/0x198
[ ] Code: 8b0002e6 eb17031f 54fffbe1 d503201f (d4210000)
[ ] ---[ end trace 0000000000000000 ]--- |
| In the Linux kernel, the following vulnerability has been resolved:
padata: Fix pd UAF once and for all
There is a race condition/UAF in padata_reorder that goes back
to the initial commit. A reference count is taken at the start
of the process in padata_do_parallel, and released at the end in
padata_serial_worker.
This reference count is (and only is) required for padata_replace
to function correctly. If padata_replace is never called then
there is no issue.
In the function padata_reorder which serves as the core of padata,
as soon as padata is added to queue->serial.list, and the associated
spin lock released, that padata may be processed and the reference
count on pd would go away.
Fix this by getting the next padata before the squeue->serial lock
is released.
In order to make this possible, simplify padata_reorder by only
calling it once the next padata arrives. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject %p% format string in bprintf-like helpers
static const char fmt[] = "%p%";
bpf_trace_printk(fmt, sizeof(fmt));
The above BPF program isn't rejected and causes a kernel warning at
runtime:
Please remove unsupported %\x00 in format string
WARNING: CPU: 1 PID: 7244 at lib/vsprintf.c:2680 format_decode+0x49c/0x5d0
This happens because bpf_bprintf_prepare skips over the second %,
detected as punctuation, while processing %p. This patch fixes it by
not skipping over punctuation. %\x00 is then processed in the next
iteration and rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
smb: client: fix use-after-free in cifs_oplock_break
A race condition can occur in cifs_oplock_break() leading to a
use-after-free of the cinode structure when unmounting:
cifs_oplock_break()
_cifsFileInfo_put(cfile)
cifsFileInfo_put_final()
cifs_sb_deactive()
[last ref, start releasing sb]
kill_sb()
kill_anon_super()
generic_shutdown_super()
evict_inodes()
dispose_list()
evict()
destroy_inode()
call_rcu(&inode->i_rcu, i_callback)
spin_lock(&cinode->open_file_lock) <- OK
[later] i_callback()
cifs_free_inode()
kmem_cache_free(cinode)
spin_unlock(&cinode->open_file_lock) <- UAF
cifs_done_oplock_break(cinode) <- UAF
The issue occurs when umount has already released its reference to the
superblock. When _cifsFileInfo_put() calls cifs_sb_deactive(), this
releases the last reference, triggering the immediate cleanup of all
inodes under RCU. However, cifs_oplock_break() continues to access the
cinode after this point, resulting in use-after-free.
Fix this by holding an extra reference to the superblock during the
entire oplock break operation. This ensures that the superblock and
its inodes remain valid until the oplock break completes. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe/pf: Clear all LMTT pages on alloc
Our LMEM buffer objects are not cleared by default on alloc
and during VF provisioning we only setup LMTT PTEs for the
actually provisioned LMEM range. But beyond that valid range
we might leave some stale data that could either point to some
other VFs allocations or even to the PF pages.
Explicitly clear all new LMTT page to avoid the risk that a
malicious VF would try to exploit that gap.
While around add asserts to catch any undesired PTE overwrites
and low-level debug traces to track LMTT PT life-cycle.
(cherry picked from commit 3fae6918a3e27cce20ded2551f863fb05d4bef8d) |
| In the Linux kernel, the following vulnerability has been resolved:
mptcp: make fallback action and fallback decision atomic
Syzkaller reported the following splat:
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 __mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 check_fully_established net/mptcp/options.c:982 [inline]
WARNING: CPU: 1 PID: 7704 at net/mptcp/protocol.h:1223 mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Modules linked in:
CPU: 1 UID: 0 PID: 7704 Comm: syz.3.1419 Not tainted 6.16.0-rc3-gbd5ce2324dba #20 PREEMPT(voluntary)
Hardware name: QEMU Ubuntu 24.04 PC (i440FX + PIIX, 1996), BIOS 1.16.3-debian-1.16.3-2 04/01/2014
RIP: 0010:__mptcp_do_fallback net/mptcp/protocol.h:1223 [inline]
RIP: 0010:mptcp_do_fallback net/mptcp/protocol.h:1244 [inline]
RIP: 0010:check_fully_established net/mptcp/options.c:982 [inline]
RIP: 0010:mptcp_incoming_options+0x21a8/0x2510 net/mptcp/options.c:1153
Code: 24 18 e8 bb 2a 00 fd e9 1b df ff ff e8 b1 21 0f 00 e8 ec 5f c4 fc 44 0f b7 ac 24 b0 00 00 00 e9 54 f1 ff ff e8 d9 5f c4 fc 90 <0f> 0b 90 e9 b8 f4 ff ff e8 8b 2a 00 fd e9 8d e6 ff ff e8 81 2a 00
RSP: 0018:ffff8880a3f08448 EFLAGS: 00010246
RAX: 0000000000000000 RBX: ffff8880180a8000 RCX: ffffffff84afcf45
RDX: ffff888090223700 RSI: ffffffff84afdaa7 RDI: 0000000000000001
RBP: ffff888017955780 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: 0000000000000000
R13: ffff8880180a8910 R14: ffff8880a3e9d058 R15: 0000000000000000
FS: 00005555791b8500(0000) GS:ffff88811c495000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 000000110c2800b7 CR3: 0000000058e44000 CR4: 0000000000350ef0
Call Trace:
<IRQ>
tcp_reset+0x26f/0x2b0 net/ipv4/tcp_input.c:4432
tcp_validate_incoming+0x1057/0x1b60 net/ipv4/tcp_input.c:5975
tcp_rcv_established+0x5b5/0x21f0 net/ipv4/tcp_input.c:6166
tcp_v4_do_rcv+0x5dc/0xa70 net/ipv4/tcp_ipv4.c:1925
tcp_v4_rcv+0x3473/0x44a0 net/ipv4/tcp_ipv4.c:2363
ip_protocol_deliver_rcu+0xba/0x480 net/ipv4/ip_input.c:205
ip_local_deliver_finish+0x2f1/0x500 net/ipv4/ip_input.c:233
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_local_deliver+0x1be/0x560 net/ipv4/ip_input.c:254
dst_input include/net/dst.h:469 [inline]
ip_rcv_finish net/ipv4/ip_input.c:447 [inline]
NF_HOOK include/linux/netfilter.h:317 [inline]
NF_HOOK include/linux/netfilter.h:311 [inline]
ip_rcv+0x514/0x810 net/ipv4/ip_input.c:567
__netif_receive_skb_one_core+0x197/0x1e0 net/core/dev.c:5975
__netif_receive_skb+0x1f/0x120 net/core/dev.c:6088
process_backlog+0x301/0x1360 net/core/dev.c:6440
__napi_poll.constprop.0+0xba/0x550 net/core/dev.c:7453
napi_poll net/core/dev.c:7517 [inline]
net_rx_action+0xb44/0x1010 net/core/dev.c:7644
handle_softirqs+0x1d0/0x770 kernel/softirq.c:579
do_softirq+0x3f/0x90 kernel/softirq.c:480
</IRQ>
<TASK>
__local_bh_enable_ip+0xed/0x110 kernel/softirq.c:407
local_bh_enable include/linux/bottom_half.h:33 [inline]
inet_csk_listen_stop+0x2c5/0x1070 net/ipv4/inet_connection_sock.c:1524
mptcp_check_listen_stop.part.0+0x1cc/0x220 net/mptcp/protocol.c:2985
mptcp_check_listen_stop net/mptcp/mib.h:118 [inline]
__mptcp_close+0x9b9/0xbd0 net/mptcp/protocol.c:3000
mptcp_close+0x2f/0x140 net/mptcp/protocol.c:3066
inet_release+0xed/0x200 net/ipv4/af_inet.c:435
inet6_release+0x4f/0x70 net/ipv6/af_inet6.c:487
__sock_release+0xb3/0x270 net/socket.c:649
sock_close+0x1c/0x30 net/socket.c:1439
__fput+0x402/0xb70 fs/file_table.c:465
task_work_run+0x150/0x240 kernel/task_work.c:227
resume_user_mode_work include/linux/resume_user_mode.h:50 [inline]
exit_to_user_mode_loop+0xd4
---truncated--- |
