| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Allocation of resources without limits or throttling issue exists in HMI ViewJet C-more series and HMI GC-A2 series, which may allow a remote unauthenticated attacker to cause a denial-of-service (DoS) condition. |
| Nokia Single RAN baseband software earlier than 24R1-SR 1.0 MP contains administrative shell input validation fault, which authenticated admin user can, in theory, potentially use for injecting arbitrary commands for unprivileged baseband OAM service process execution via special characters added to baseband internal COMA_config.xml file.
This issue has been corrected starting from release 24R1-SR 1.0 MP and later, by adding proper input validation to OAM service process which prevents injecting special characters via baseband internal COMA_config.xml file. |
| A vulnerability in the web application of ctrlX OS allows a remote authenticated (low-privileged) attacker to induce a Denial-of-Service (DoS) condition on the device via multiple crafted HTTP requests. In the worst case, a full power cycle is needed to regain control of the device. |
| A command injection vulnerability exists in the Infinxt iEdge 100 2.1.32 in the Troubleshoot module "MTR" functionality. The vulnerability is due to improper validation of user-supplied input in the mtrIp parameter. An attacker can exploit this flaw to execute arbitrary operating system commands on the underlying system with the same privileges as the web application process. |
| An issue in the component /internals/functions of R-fx Networks Linux Malware Detect v1.6.5 allows attackers to escalate privileges and execute arbitrary code via supplying a file that contains a crafted filename. |
| Johnson Controls Metasys component listed below have Improper Neutralization of Special Elements used in a Command (Command Injection) Vulnerability . Successful exploitation of this vulnerability could allow remote SQL execution This issue affects
* Metasys: Application and Data Server (ADS) installed with SQL Express deployed as part of the Metasys 14.1 and prior installation,
* Extended Application and Data Server (ADX) installed with SQL Express deployed as part of the Metasys 14.1 installation,
* LCS8500 or NAE8500 installed with SQL Express deployed as part of the Metasys installation Releases 12.0 through 14.1,
* System Configuration Tool (SCT) installed with SQL Express deployed as part of the SCT installation 17.1 and prior,
* Controller Configuration Tool (CCT) installed with SQL Express deployed as part of the CCT installation 17.0 and prior. |
| OpenTelemetry dotnet is a dotnet telemetry framework. A vulnerability in OpenTelemetry.Api package 1.10.0 to 1.11.1 could cause a Denial of Service (DoS) when a tracestate and traceparent header is received. Even if an application does not explicitly use trace context propagation, receiving these headers can still trigger high CPU usage. This issue impacts any application accessible over the web or backend services that process HTTP requests containing a tracestate header. Application may experience excessive resource consumption, leading to increased latency, degraded performance, or downtime. This vulnerability is fixed in 1.11.2. |
| SonarQube Server and Cloud is a static analysis solution for continuous code quality and security inspection. In versions 4 to 5.3.0, a command injection vulnerability was discovered in the SonarQube Scan GitHub Action that allows untrusted input arguments to be processed without proper sanitization. Arguments sent to the action are treated as shell expressions, allowing potential execution of arbitrary commands. A fix has been released in SonarQube Scan GitHub Action 5.3.1. |
| A vulnerability, which was classified as critical, has been found in Digital China DCME-520 up to 20250320. This issue affects some unknown processing of the file /usr/local/WWW/function/audit/newstatistics/mon_merge_stat_hist.php. The manipulation of the argument type_name leads to os command injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. Other parameters might be affected as well. |
| A vulnerability classified as critical has been found in Novastar CX40 up to 2.44.0. Affected is the function system/popen of the file /usr/nova/bin/netconfig of the component NetFilter Utility. The manipulation leads to command injection. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| check_by_ssh in Nagios nagios-plugins 2.4.5 allows arbitrary command execution via ProxyCommand, LocalCommand, and PermitLocalCommand with \${IFS}. This has been categorized both as fixed in e8810de, and as intended behavior. |
| bep/imagemeta is a Go library for reading EXIF, IPTC and XMP image meta data from JPEG, TIFF, PNG, and WebP files. The EXIF data format allows for defining excessively large data structures in relatively small payloads. Before v0.10.0, If you didn't trust the input images, this could be abused to construct denial-of-service attacks. v0.10.0 added LimitNumTags (default 5000) and LimitTagSize (default 10000) options. |
| bep/imagemeta is a Go library for reading EXIF, IPTC and XMP image meta data from JPEG, TIFF, PNG, and WebP files. The buffer created for parsing metadata for PNG and WebP images was only bounded by their input data type, which could lead to potentially large memory allocation, and unreasonably high for image metadata. Before v0.11.0, If you didn't trust the input images, this could be abused to construct denial-of-service attacks. v0.11.0 added a 10 MB upper limit. |
| The Apollo Router Core is a configurable, high-performance graph router written in Rust to run a federated supergraph that uses Apollo Federation 2. Prior to 1.61.2 and 2.1.1, a vulnerability in Apollo Router allowed queries with deeply nested and reused named fragments to be prohibitively expensive to query plan, specifically during named fragment expansion. Named fragments were being expanded once per fragment spread during query planning, leading to exponential resource usage when deeply nested and reused fragments were involved. This could lead to excessive resource consumption and denial of service. This has been remediated in apollo-router versions 1.61.2 and 2.1.1. |
| xz is a pure golang package for reading and writing xz-compressed files. Prior to version 0.5.14, it is possible to put data in front of an LZMA-encoded byte stream without detecting the situation while reading the header. This can lead to increased memory consumption because the current implementation allocates the full decoding buffer directly after reading the header. The LZMA header doesn't include a magic number or has a checksum to detect such an issue according to the specification. Note that the code recognizes the issue later while reading the stream, but at this time the memory allocation has already been done. This issue has been patched in version 0.5.14. |
| A JNDI injection issue was discovered in Cloudera JDBC Connector for Hive before 2.6.26 and JDBC Connector for Impala before 2.6.35. Attackers can inject malicious parameters into the JDBC URL, triggering JNDI injection during the process when the JDBC Driver uses this URL to connect to the database. This could lead to remote code execution. JNDI injection is possible via the JDBC connection property krbJAASFile for the Java Authentication and Authorization Service (JAAS). Using untrusted parameters in the krbJAASFile and/or remote host can trigger JNDI injection in the JDBC URL through the krbJAASFile. |
| XMedia Recode 3.4.8.6 contains a denial of service vulnerability that allows attackers to crash the application by loading a specially crafted .m3u playlist file. Attackers can create a malicious .m3u file with an oversized buffer to trigger an application crash when the file is opened. |
| Codemers KLIMS 1.6.DEV allows Python code injection. A user can provide Python code as an input value for a parameter or qualifier (such as for sorting), which will get executed on the server side. |
| The LB-Link routers, including the BL-AC2100_AZ3 V1.0.4, BL-WR4000 v2.5.0, BL-WR9000_AE4 v2.4.9, BL-AC1900_AZ2 v1.0.2, BL-X26_AC8 v1.2.8, and BL-LTE300_DA4 V1.2.3 models, are vulnerable to unauthorized command injection. Attackers can exploit this vulnerability by accessing the /goform/set_serial_cfg interface to gain the highest level of device privileges without authorization, enabling them to remotely execute malicious commands. |
| A vulnerability in the web-based management interface of network access point configuration services could allow an authenticated remote attacker to perform remote command execution. Successful exploitation could allow an attacker to execute arbitrary commands on the underlying operating system. |
