| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| An incorrect buffer size calculation in the Windows Interactive Service in OpenVPN 2.7_alpha1 through 2.7.6 allows local authenticated users to cause memory corruption or disclose sensitive information via crafted NRPT inputs. |
| This CVE ID has been rejected as a duplicate. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: algif_aead - Revert to operating out-of-place
This mostly reverts commit 72548b093ee3 except for the copying of
the associated data.
There is no benefit in operating in-place in algif_aead since the
source and destination come from different mappings. Get rid of
all the complexity added for in-place operation and just copy the
AD directly. |
| There is a memory corruption vulnerability recently
discovered in NI LabVIEW that may result in information disclosure or arbitrary
code execution. Successful exploitation requires an attacker to get a
user to open a specially crafted VI. This vulnerability affects NI
LabVIEW 2026 Q3 (26.3.0) and prior versions. |
| A flaw has been found in java-json-tools json-patch up to 1.13. Affected is the function JsonMergePatch.fromJson of the file JsonMergePatchDeserializer.java. Executing a manipulation can lead to stack-based buffer overflow. The attack may be performed from remote. The exploit has been published and may be used. The project was informed of the problem early through an issue report but has not responded yet. |
| A vulnerability has been found in ModelCloud GPTQModel up to 7.2.0. This vulnerability affects unknown code of the file gptqmodel/nn_modules/qlinear/tritonv2.py of the component Triton dequantization kernel. Such manipulation of the argument g_idx leads to out-of-bounds read. The attack can be executed remotely. The exploit has been disclosed to the public and may be used. Upgrading to version 7.3.0 is able to resolve this issue. The name of the patch is 877c732f7d7dccd56a729844c6a5bd20f3aa8bb1. Upgrading the affected component is recommended. |
| A vulnerability was found in Tenda HG10 300001138. This vulnerability affects the function formURL of the file /boaform/admin/formURL. Performing a manipulation of the argument Keywd/urlFQDN results in buffer overflow. The attack may be initiated remotely. The exploit has been made public and could be used. |
| CDT before 1.4.5 contains an out-of-bounds read vulnerability in the opposedVertexInd() function when constraint edge intersections are computed in floating point and round outside adjacent triangles. Attackers can supply nearly-degenerate constraint edges through geometry data to trigger an out-of-bounds array access that crashes the calling process. |
| FreeRDP Windows client before 3.29.0 contains a heap buffer overflow vulnerability in the clipboard virtual channel when processing CLIPRDR_FILE_CONTENTS_RESPONSE PDUs without validating the server-provided size against the destination buffer. A malicious RDP server can send a response with a data payload significantly larger than requested, causing arbitrary heap memory corruption that may enable remote code execution when a user performs a paste operation. |
| A vulnerability was determined in 92181 markdown up to 058cab0cb7fb245a0ccc6b8446963ff8d573558f. Affected by this issue is the function lds of the file md.c. Executing a manipulation can lead to out-of-bounds read. The attack can be executed remotely. This product implements a rolling release for ongoing delivery, which means version information for affected or updated releases is unavailable. This patch is called c000d2f9cf390c315378d3717cf20911cf3e80a6. A patch should be applied to remediate this issue. |
| Illustrator is affected by an out-of-bounds read vulnerability that could lead to disclosure of sensitive memory. An attacker could leverage this vulnerability to disclose sensitive information. Exploitation of this issue requires user interaction in that a victim must open a malicious file. |
| Net::IP::LPM versions before 1.11 for Perl allow a heap out-of-bounds read via an unbounded prefix length.
add() passes the prefix string to the trie builder addPrefixToTrie() without checking it against the address width.
addPrefixToTrie() then walks the prefix buffer by prefix_length bits, reading prefix[byte] for byte up to prefix_len/8, where prefix is the 4-byte (IPv4) or 16-byte (IPv6) packed address. A prefix length greater than 32 for IPv4 or 128 for IPv6, for example add("1.2.3.4/255", $v) or add("2001:db8::/255", $v), reads past the end of the packed address.
The out-of-bounds read happens during trie construction and is bounded: the prefix length is stored as an unsigned char, so the bit walk reads at most 32 bytes from the start of the packed address, a short distance past the end of the 4-byte or 16-byte buffer. It is detectable under AddressSanitizer, valgrind, or a hardened allocator, where it can abort the process. Lookups and dump() format only the valid address width, so the out-of-bounds bytes are not exposed through the module's API. |
| Net::IP::LPM version 1.10 for Perl does not properly consider leading zero characters in IP CIDR address strings, which could allow attackers to bypass access control that is based on IP addresses.
Leading zeros are used to indicate octal numbers, which can confuse users who are intentionally using octal notation, as well as users who believe they are using decimal notation. |
| In Power HAL, there is a possible out of bounds write due to a missing bounds check. This could lead to local escalation of privilege if a malicious actor has already obtained the System privilege. User interaction is not needed for exploitation. Patch ID: ALPS11165543; Issue ID: MSV-9011. |
| In the Linux kernel, the following vulnerability has been resolved:
nsfs: tighten permission checks for handle opening
Even privileged services should not necessarily be able to see other
privileged service's namespaces so they can't leak information to each
other. Use may_see_all_namespaces() helper that centralizes this policy
until the nstree adapts. |
| In geniezone, there is a possible information disclosure due to a missing bounds check. This could lead to local information disclosure if a malicious actor has already obtained the System privilege. User interaction is needed for exploitation. Patch ID: ALPS10867524 / ALPS10876355; Issue ID: MSV-6674. |
| Tobit Laboratories AG TeamDavid's Webbox application handles password changes using a function triggered by
including the string "(editini)" in the file path, writing the new
password to the specified "Archive.ini" file. However, the application
does not verify that the provided path actually refers to an
"Archive.ini" file. If an attacker specifies a different file with
excessive size, a buffer overflow occurs. This vulnerability allows an
unauthenticated attacker to crash the server, resulting in denial of
service. This issue affects TeamDavid before Rollout 528.
Starting with Rollout 528 (June 30, 2026), the affected functionality is disabled by default and the vulnerabilities are therefore no longer exposed through this functionality. |
| A flaw was found in libtpms, a library that provides software TPM 2.0 emulation. When restoring TPM 2.0 state (for example during a virtual machine's power-on or state/migration restore), a malformed state blob can supply an oversized skip-block length that is not validated against the remaining size of the input buffer. This can drive an internal size counter negative, which bypasses a subsequent bounds check due to an unsafe signed-to-unsigned conversion, causing the parser to read memory outside the bounds of the heap buffer holding the state data. Successful exploitation can crash the process hosting libtpms (such as swtpm), resulting in a denial of service of the emulated TPM device and the virtual machine that depends on it. No data corruption or information disclosure was confirmed. |
| Out-of-bounds read vulnerability in Samsung Opensource rLottie allows Overread Buffers.
This issue affects rLottie: 25648aef19187b3f87f4d9420b8d761453ad4630. |
| YesWiki is a wiki system written in PHP. Prior to version 4.6.6, the recentchanges action (actions/recentchanges.php) accepts a period argument from two disjoint parameter spaces. A whitelist validates only the URL form against ['day','week','month']. The action-argument form takes the else branch with no validation, and the value flows into PageManager::getRecentlyChanged(), where it is interpolated into a WHERE time >= '...' ORDER BY time DESC clause without escaping or parameterization. UNION-based injection succeeds, the leaked rows render into the response page, so any visitor of the trigger page sees the exfiltrated data. The vulnerability provides arbitrary read of the YesWiki database to anyone who can save the trigger page. On a default install (default_write_acl='*'), this includes anonymous users, subject to the hashcash JS check on the page-edit form. Once the trigger page is saved, every subsequent view fires the injection as the SQLi is stored. Stored SQL injection is reachable through the page-edit flow, with arbitrary database read. This issue has been patched in version 4.6.6. |
