| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
sctp: discard the rest of the packet on a stale-cookie error
When an association is in COOKIE-ECHOED state and the peer sends a
bundled [ERROR(Stale Cookie)][DATA] packet from one of its non-primary
addresses, processing the ERROR chunk takes the non-fatal stale-cookie
retry path sctp_sf_do_5_2_6_stale(), which queues
SCTP_CMD_DEL_NON_PRIMARY while keeping the association alive.
sctp_cmd_del_non_primary() removes every non-primary transport -
including the very transport this packet arrived on, which is still
referenced by the receive lookup and shared by all chunks of the
packet via chunk->transport.
sctp_assoc_rm_peer() does redirect asoc->peer.last_data_from away from
the removed transport, but right afterwards the bundled DATA chunk
makes sctp_assoc_bh_rcv() re-register
asoc->peer.last_data_from = chunk->transport unconditionally, undoing
the redirection with the just-removed transport.
Once the packet is done, the receive reference is dropped and the
transport is RCU-freed, while the surviving association keeps the
dangling last_data_from. A later FWD-TSN (or the delayed SACK timer)
makes sctp_gen_sack() dereference it (->param_flags and friends), and
sctp_make_sack()/sctp_outq_select_transport() may write to the freed
object and link it into the live transport list. This is a
use-after-free triggerable by any malicious SCTP peer (or a local
unprivileged user acting as one) with no capabilities required:
BUG: KASAN: slab-use-after-free in sctp_do_sm+0x498a/0x5660
Read of size 4 at addr ffff88800e1e356c by task poc/115
Call Trace: sctp_do_sm <- sctp_assoc_bh_rcv <- sctp_inq_push <-
sctp_rcv <- ip_protocol_deliver_rcu <- ip_rcv
Allocated: sctp_transport_new <- sctp_assoc_add_peer <-
sctp_process_init (INIT-ACK processing)
Freed: kfree <- sctp_transport_destroy_rcu <- rcu_core
(call_rcu queued by sctp_transport_put at end of sctp_rcv)
The buggy address is located 364 bytes inside of freed 1024-byte
region [ffff88800e1e3400, ffff88800e1e3800), cache kmalloc-1k
Note that commit 03a9d10ecf71 ("sctp: drop a chunk if its transport
was removed") only covers the window between the receive lookup and
the chunk processing (e.g. an ASCONF DEL-IP racing the socket backlog);
here the transport is removed *while* the packet is being processed,
by an earlier chunk of the same packet, so the drop in sctp_inq_push()
does not reach this path. Verified with the bundled [ERROR(Stale
Cookie)][DATA] + FWD-TSN reproducer: the KASAN report above still
fires with that commit applied, and is gone with this patch on top.
Fix it by discarding the rest of the packet on this path, as suggested
by Xin. After the stale-cookie ERROR has sent the association back to
COOKIE-WAIT and removed the non-primary transports, the remaining
chunks of the packet can only run against the restarted handshake
while referencing the removed arrival transport through
chunk->transport: besides the last_data_from registration above,
sctp_cmd_setup_t2() and the sctp_make_*() reply builders would also
copy that pointer into association-lifetime state that
sctp_assoc_rm_peer() has already sanitized. Let the peer retransmit
them, in line with what sctp_inq_push() does for chunks whose
transport was removed before processing. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: reject invalid and unexpected GRP_ACK_MSG to prevent bc_ackers underflow
Commit 48a5fe38772b ("tipc: fix bc_ackers underflow on duplicate
GRP_ACK_MSG") rejected duplicate/stale ACKs in tipc_group_proto_rcv()
by returning early when less_eq(acked, m->bc_acked).
However, that check remains incomplete in two ways:
1. When grp->bc_ackers is zero (e.g. on a quiet group, when replicast
ACKs were not requested, or after all expected members have already
acknowledged), an unexpected GRP_ACK_MSG with acked > m->bc_acked
passes less_eq() and unconditionally decrements grp->bc_ackers.
Because bc_ackers is a u16, this wraps to 65535, causing
tipc_group_bc_cong() to permanently report congestion and blocking
all future group broadcasts on the socket.
2. During an active broadcast round (grp->bc_ackers > 0), the sender
transmits packet S and advances grp->bc_snd_nxt to S + 1. Receivers
increment their expected counter to S + 1 upon consuming packet S,
so the only valid ACK value for the current round is strictly
acked == grp->bc_snd_nxt.
However, tipc_group_update_bc_members() initializes each member's
m->bc_acked to prev = grp->bc_snd_nxt - 1 (S - 1 before increment).
This leaves a 2-sequence gap (S - 1 to S + 1) in sequence space.
An incoming ACK is therefore neither rejected as duplicate nor
prevented from decrementing grp->bc_ackers if an unexpected or stale
value (such as S) is received. A member sending acked = S followed
by acked = S + 1 could decrement grp->bc_ackers twice in the same
round, prematurely clearing bc_ackers or underflowing it.
Fix this by:
- Dropping GRP_ACK_MSG immediately if grp->bc_ackers is zero.
- Requiring acked == grp->bc_snd_nxt and rejecting duplicates where
m->bc_acked == acked. Because replicast broadcast rounds are strictly
sequential, only grp->bc_snd_nxt can be acknowledged, and each member
can acknowledge at most once per round.
Note that a related pre-existing issue in tipc_group_delete_member()
(where grp->bc_ackers decrementing to zero upon member departure does
not restore *grp->open or trigger a socket wakeup) will be addressed
in a separate patch. |
| In the Linux kernel, the following vulnerability has been resolved:
vlan: ensure sufficient headroom in vlan_dev_hard_header()
Callers that only reserve ETH_HLEN or less (such as llc_alloc_frame()),
or skbs allocated before dynamic device/headroom changes (e.g. toggling
VLAN_FLAG_REORDER_HDR or bonding/team switching slaves), can reach
vlan_dev_hard_header() with insufficient headroom and trigger
skb_under_panic().
Use skb_cow_head() in vlan_dev_hard_header() when VLAN_FLAG_REORDER_HDR
is not set to ensure sufficient headroom for the VLAN header(s) and the
underlying device hard header.
Use READ_ONCE() to read dev->hard_header_len and dev->needed_headroom as
they can be updated concurrently under RTNL (e.g. in
vlan_transfer_features()) while vlan_dev_hard_header() runs locklessly on
the transmit path. Also avoid LL_RESERVED_SPACE(dev) here so that the
extra HH_DATA_MOD alignment padding does not trigger unnecessary
pskb_expand_head() reallocations on inner stacked VLAN devices after the
outer VLAN header has been pushed. |
| In the Linux kernel, the following vulnerability has been resolved:
net: libwx: fix races in Tx timestamp handling
wx->ptp_tx_skb is shared between the Tx path, the PTP auxiliary
worker and the timestamp cleanup paths. The
WX_STATE_PTP_TX_IN_PROGRESS bit prevents multiple Tx paths from
submitting timestamp requests, but does not serialize the worker
against cleanup.
As a result, wx_ptp_clear_tx_timestamp() can free an skb after
wx_ptp_tx_hwtstamp_work() has obtained its pointer. The worker may
then pass the freed skb to skb_tstamp_tx() and release the same
reference again.
The cleanup path may also clear the in-progress bit while the worker
is still processing the old skb. This allows the Tx path to publish a
new skb which the worker can subsequently overwrite with NULL,
leaking its reference.
Add a dedicated spinlock to protect publication and consumption of
the Tx timestamp skb. Detach the skb and clear the in-progress bit
while holding the lock, then deliver the timestamp and release the skb
after dropping it. Use the same locked cleanup in the quiesce path,
but keep the detach there free of register accesses: quiesce runs
during PCIe error recovery, where MMIO is not reliable, and it
deliberately did not touch the device before. The lock is taken with
interrupts disabled, because netpoll can call ndo_start_xmit() with
hard interrupts already off.
When handling a Tx DMA mapping failure, keep the transmit path
reference until after comparing the skb under the lock. This prevents
skb address reuse from making the error path mistake a newer timestamp
request for the failed one. |
| In the Linux kernel, the following vulnerability has been resolved:
vxlan: use one headroom snapshot for neighbour replies
vxlan_na_create() samples LL_RESERVED_SPACE() to size the reply skb and then
samples it again to reserve headroom. A concurrent vxlan_changelink() can
update needed_headroom between the two reads, creating a TOCTOU race. The
second value can exceed the allocation and make the Ethernet header write out
of bounds.
The race is reproducible on the unpatched kernel. It occurred when
vxlan_na_create() generated a neighbour reply while vxlan_changelink() changed
the link headroom. KASAN caught a four-byte write two bytes beyond a 704-byte
skbuff_small_head allocation.
Snapshot the headroom once and use that value for both allocation and
reservation. |
| In the Linux kernel, the following vulnerability has been resolved:
nfc: st21nfca: validate ISO15693 inventory length
The ISO15693 inventory helper removes a two-byte prefix without checking
that it exists, then accepts a one-byte remainder before reading data[1] as
the DSFID.
Require the prefix and at least two remaining bytes before copying the UID
data and reading the DSFID. |
| Incorrect object recycling and re-use vulnerability in Apache Tomcat affecting HTTP/2 processing of asynchronous servlets can trigger request and/or response mix-up between users.
This issue affects Apache Tomcat: from 11.0.22 through 11.0.26, from 10.1.55 through 10.1.60, from 9.0.118 through 9.0.122.
Users are recommended to upgrade to version 11.0.27, 10.1.61 or 9.0.123, which fixes the issue. |
| A Stored Cross-Site Scripting vulnerability exists in the SNS VPN log monitoring screen. |
| virtualenv is a tool for creating isolated virtual python environments. Prior to 21.14.9, the stdlib venv creator reads generated pyvenv.cfg with str.splitlines() and merges parsed keys over virtualenv's selected configuration. An untrusted caller who influences the destination pathname can include a line-boundary character such as U+2028 to inject keys including home and include-system-site-packages, causing path data to change configuration structure before final output. Setting include-system-site-packages to true weakens environment isolation, while an altered home can change which standard-library files the interpreter loads if the attacker also controls that location. The builtin creator does not use this readback path. This issue is fixed in version 21.14.9. |
| Use of Externally-Controlled Input to Select Classes or Code ('Unsafe Reflection') vulnerability in Apache Johnzon.
ClassConverter loads & static-initializes an attacker-named class from untrusted JSON.
This issue affects Apache Johnzon: from 1.0.0 before 2.2.0.
Users are recommended to upgrade to version 1.3.1 (javax namespace) or 2.2.0 (jakarta specification namespace), which fixes the issue. |
| A security vulnerability has been detected in grandnode grandnode2 up to 2.3.0. This impacts the function ProductImportDataObject.PrepareProductPictures of the component Excel Import. The manipulation of the argument Picture1/Picture2/Picture3 leads to path traversal. The attack can be initiated remotely. Upgrading to version 2.4.0 will fix this issue. The identifier of the patch is 2abbaed232080ad74949c6f35581f0351e309972. It is suggested to upgrade the affected component. The vendor was contacted early about this disclosure. |
| A vulnerability has been found in Wuxi Wubang Security Software Wubang Five-in-One Safety Production Management Information System up to 3.5. Affected is the function xp_cmdshell of the file /ws.asmx. The manipulation of the argument sql leads to sql injection. The attack may be initiated remotely. The exploit has been disclosed to the public and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| Apache Airflow Amazon provider: the AWS auth manager's SAML login flow does not bind the authentication response to the browser that began it. The login handler discards the AuthnRequest ID and the callback validates the assertion without requiring a matching InResponseTo, so an unauthenticated attacker who can cause a victim to load a page can complete a SAML login in the victim's browser using the attacker's own assertion, silently logging the victim into the attacker's Airflow account. Subsequent work the victim performs lands in a session the attacker controls.
Affects deployments using the AWS auth manager with SAML authentication. The victim needs only to visit an attacker-controlled page; no Airflow account or credential is required of the attacker. This is the same login-CSRF class fixed in the Keycloak auth manager as CVE-2026-40948.
Users of apache-airflow-providers-amazon are recommended to upgrade to version 9.38.0, which fixes the issue. |
| A Stored Cross-Site Scripting vulnerability exists in the SNS enrollment Portal.
Through the captive portal an attacker can inject an XSS when requesting certificate creation for user. The stored XSS can only be triggered during validation by the administrator. |
| Cachet is an open-source status page system. Versions 2.4.1 and earlier have a stored Cross-Site Scripting (XSS) vulnerability in the incident creation form, allowing an authenticated attacker to inject malicious HTML/JavaScript that executes in the browser of any user who views the status page, potentially leading to session token theft and account takeover. Commits 57b44a8bac0b250b0d5751e93e0349070d14606e and 23adbb88ffa819f92be4a905ff1d812670d980a2 in `cachethq/core` patch the issue. |
| Thunderbird did not escape attribute values when serializing outgoing XMPP stanzas. Because values from incoming requests were echoed back in automatic replies, a remote XMPP user could send a crafted request that caused Thunderbird to inject arbitrary stanzas into the user's connection, which the server would then process as if sent by the user. This could be used to send messages or change contact and subscription settings on behalf of the user, without any interaction. This bug only affects Thunderbird's chat feature with XMPP accounts. This vulnerability was fixed in Thunderbird 158.0.1 and Thunderbird 153.5.1. |
| Nginx UI is a web user interface for the Nginx web server. From 2.3.8 until 2.5.0, an authenticated administrator with an active secure session can submit attacker-controlled portable backup key material and a matching manifest to POST /api/restore. The restore flow trusts the supplied key, decrypts attacker-controlled contents, and replaces the live app.ini, including protected nginx command settings such as TestConfigCmd. Triggering POST /api/nginx/test then executes the restored command in the Nginx UI runtime context, affecting confidentiality, integrity, and availability. This issue is fixed in version 2.5.0. |
| @fastify/middie is the Express-style middleware engine for Fastify. In versions from 9.0.0 through 9.3.5, the use() function joined a path-scoped middleware's mount path to the plugin scope prefix in a way that could diverge from the path Fastify's router serves, most often when the scope prefix ended in a slash, and also for array mount paths and for mount paths written without a leading slash. When the two paths disagreed, the middleware was silently skipped while the route handler still ran, so path-scoped middleware such as authentication, authorization, or rate limiting could be bypassed by a single unauthenticated request. The issue is fixed in @fastify/middie 9.3.6, and users should upgrade to 9.3.6 or later. As a workaround, enforce authorization in a Fastify hook such as preHandler that runs after the router has resolved the request. |
| FreeRDP 3.0.0-beta4 before 3.32.0 contains a NULL pointer dereference in arm_handle_request_ok when an ARM endpoint returns an empty HTTP 200 body. Attackers controlling the configured ARM gateway can return a zero-length body to pass NULL to strnlen and crash the connecting client. |
| Incorrect privilege assignment in the IAM policy of AWS CICD-toolchain-for-serverless-applications 1.0.7 through 1.0.10 allows remote authenticated users with push access to the application source repository to escalate privileges and access or modify resources outside the application stack in the same AWS account via application templates deployed by the toolchain pipeline.
To remediate this issue, users should upgrade existing toolchain stacks to version 1.0.11 or later. |
