| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Fix wrong return code to engine in asynch callbacks
When crypto_finalize_hash_request() or
crypto_finalize_skcipher_request() explicitly completes a request, the
do_one_request callback must return 0 to indicate successful
handling. Returning a negative error code causes the crypto engine to
assume the driver failed to take ownership and triggers a second
completion via crypto_request_complete(), resulting in a double
completion. This pattern occurs in paes_s390.c 4 times and once in
phmac_s390.c.
Fixed in phmac_do_one_request() and all four paes do_one_request
callbacks (ecb, cbc, ctr, xts) by returning 0 after explicit
finalization instead of propagating the error code. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Limit firmware log name prints to field size
The name in struct vpu_tracing_buffer_header is a fixed-size array
populated by the NPU firmware. It is expected to be NUL-terminated,
but nothing on the host side enforces this, so printing it with an
unbounded string conversion would read past the field if the
terminator is ever missing and expose adjacent bytes of the shared
tracing BO through dmesg and the debugfs FW log output.
Print at most as many characters as the name field holds, so the output
never runs past it even if the string is not NUL-terminated. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate firmware log buffer metadata
The tracing log headers parsed by fw_log_print_buffer() reside in
DMA-shared BOs that the NPU firmware can write to.
fw_log_from_bo() validated log->header_size and log->size, but
fw_log_print_buffer() re-read those same fields from shared memory
afterwards, allowing a TOCTOU where firmware changes them between the
check and the use, and making the host dereference out-of-bounds
addresses while printing logs.
Snapshot the validated values once with READ_ONCE() and pass them down
explicitly in a new struct ivpu_fw_log_desc instead of re-reading them
from the shared struct. |
| In the Linux kernel, the following vulnerability has been resolved:
x86/alternatives: Exclude text poking against change_page_attr()
From time to time, the following BUG can be observed
in the x86 alternatives patching code [0]:
> kernel BUG at arch/x86/kernel/alternative.c:2576!
> Oops: invalid opcode: 0000 [#1] SMP NOPTI
> CPU: 0 UID: 0 PID: 355 Comm: (udev-worker) Not tainted 7.1.3-1-default #1 PREEMPT(full) openSUSE Tumbleweed 8c1795b03ec64f997e57a8ad38b1161e3b98da64
> Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS unknown 02/02/2022
> RIP: 0010:__text_poke+0x2aa/0x450
> Call Trace:
> <TASK>
> smp_text_poke_batch_finish+0x2a7/0x320
> __static_call_transform+0xb7/0x220
> arch_static_call_transform+0x5b/0xb0
> __static_call_init+0xe9/0x270
> static_call_module_notify+0x11f/0x150
> notifier_call_chain+0x61/0xe0
> blocking_notifier_call_chain_robust+0x63/0xc0
> load_module+0x1c92/0x20c0
> init_module_from_file+0xd8/0x140
> idempotent_init_module+0x100/0x2f0
> __x64_sys_finit_module+0x71/0xe0
> do_syscall_64+0xe1/0x610
> entry_SYSCALL_64_after_hwframe+0x76/0x7e
which matches the following BUG_ON() in alternative.c:
/*
* If something went wrong, crash and burn since recovery paths are not
* implemented.
*/
BUG_ON(!pages[0] || (cross_page_boundary && !pages[1]));
This can happen if vmalloc_to_page() fails, for any reason. Such can happen
if text poking races with CPA, which can possibly result in the collapsing
of page tables (or breaking of PMD hugepages). It is not a problem for most
users of vmalloc_to_page() (they solely own the vmalloc'd range) but, when
CONFIG_ARCH_HAS_EXECMEM_ROX=y, various modules own a single execmem vmalloc
range, and can call set_memory_*() in parallel on it. This can happen to
race against __text_poke and cause havoc in vmalloc_to_page().
Fix it by excluding against CPA using the init_mm mmap read lock.
[ dhansen: Fix up SoB ordering. The actual code flow here was:
Pedro=>Lorenzo=>Mike=>Me which is reflected in the SoB chain
now. I *believe* Mike simply picked up Lorenzo's update to
Pedro's post from the Link ] |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: btqcomsmd: destroy RPMsg endpoints before freeing hci_dev
The command and ACL RPMsg endpoints store struct btqcomsmd as their
callback private data. The receive callbacks dereference btq->hdev
without taking an hci_dev reference.
The current teardown order frees the hci_dev before destroying the RPMsg
endpoints in both the hci_register_dev() error path and the driver remove
path. If WCNSS delivers data in that window, the endpoint callback can
run with an already freed hci_dev and pass it to the Bluetooth core.
For qcom_smd endpoints, rpmsg_destroy_ept() closes the channel and clears
the callback under the channel recv_lock. The receive path holds the same
lock while invoking the callback, so destroying the endpoints first both
prevents new callbacks and serializes with any callback already running.
Destroy the command and ACL endpoints before hci_free_dev(). Keep
hci_unregister_dev() first during remove so the HCI core stops issuing
operations before the transport endpoints are shut down. In the full
registration-error cleanup path, return directly after freeing the hci_dev
to avoid falling through to the partial-construction labels and destroying
the endpoints twice. |
| In the Linux kernel, the following vulnerability has been resolved:
accel/ivpu: Validate full buffer range in ivpu_to_cpu_addr
Add a size parameter to ivpu_to_cpu_addr() and validate that the
whole [vpu_addr, vpu_addr + size) range stays within the BO. |
| In the Linux kernel, the following vulnerability has been resolved:
iommu/s390: Fix NULL dereference in iova_to_phys() with ZPCI_TABLE_TYPE_RFX
When using a 5-level translation table via ZPCI_TABLE_TYPE_RFX
get_rso_from_iova() returns NULL when the region-first entry is invalid.
Yet in get_rto_from_iova() the region-second origin rso is not checked
to be non-NULL before accessing rso[rsx] leading to a NULL pointer
dereference instead of a NULL return when iova_to_phys() is called on
a unmapped IOVA. Fix this by adding the missing NULL check. |
| In the Linux kernel, the following vulnerability has been resolved:
s390/crypto: Map EBUSY to EIO when key conversion fails repeatedly
When hardware persistently returns -EBUSY after exhausting retries,
the error propagates to crypto_finalize_*_request(). The crypto API's
completion wrapper treats -EBUSY as a queueing status and swallows it,
preventing the completion callback from firing. This causes callers
using crypto_wait_req() to block indefinitely.
Translate persistent -EBUSY to -EIO after retry exhaustion to ensure
proper error propagation and callback invocation. |
| In the Linux kernel, the following vulnerability has been resolved:
net: dsa: tag_brcm: legacy FCS: request needed tailroom
The legacy FCS tagger calculates the CRC over skb->len bytes starting at
skb->data. When a nonlinear skb reaches the tagger, this reads past the
linear head into unrelated slab memory.
The tagger appends an Ethernet FCS but does not declare that tailroom. As a
result, DSA leaves NETIF_F_SG and NETIF_F_FRAGLIST enabled on the user
port, and nonlinear skbs can reach the CRC calculation.
Declare the required tailroom. DSA will then clear those features and the
networking core will linearize skbs before the tagger runs.
A KASAN-enabled dsa_loop test using this tagger reports:
BUG: KASAN: slab-out-of-bounds in crc32_le
Read of size 1 at addr ffff8880397086c0 by task exp/135
Call Trace:
crc32_le (lib/crc/crc32-main.c:38)
brcm_leg_fcs_tag_xmit (net/dsa/tag_brcm.c:343)
dsa_user_xmit (net/dsa/user.c:942)
dev_hard_start_xmit (net/core/dev.c:3937)
__dev_queue_xmit (net/core/dev.c:4926)
packet_sendmsg (net/packet/af_packet.c:3110)
__sys_sendto (net/socket.c:2281)
The buggy address belongs to the object at ffff888039708400
which belongs to the cache skbuff_small_head of size 704
The buggy address is located 0 bytes to the right of
allocated 704-byte region [ffff888039708400, ffff8880397086c0) |
| In the Linux kernel, the following vulnerability has been resolved:
accel/amdxdna: put the chained BO when its mapping fails
amdxdna_cmd_set_error() looks up the first BO of a command chain, which
takes a reference, and drops it at the end of the function. The mapping of
that BO is established in between, and the failure path returns without the
put, so the reference is leaked.
Ordinary use does not reach it. The chain has been submitted before any of
this runs, so aie2_cmdlist_fill_slot() has already called
amdxdna_cmd_get_op() on that BO and amdxdna_gem_vmap() has cached its
address. What makes it reachable is that the BO is resolved again by
handle here, and the handle is userspace's to recycle: closing it after
submission and importing a dma-buf whose exporter implements no vmap onto
the same id leaves amdxdna_gem_get_obj() returning an object this cannot
map, since prime_import() types every import AMDXDNA_BO_SHARE. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Fix percpu map update indexing with sparse CPU IDs
Per-CPU array, hash, and cgroup storage map updates without BPF_F_CPU
or BPF_F_ALL_CPUS use a value buffer whose per-CPU slots are packed in
possible-CPU order. The buffer is sized as:
round_up(value_size, 8) * num_possible_cpus()
The update paths iterate over possible CPUs, but use the logical CPU ID
to calculate the source offset:
value + size * cpu
This only works when possible CPU IDs are contiguous starting at zero.
For example, with a possible CPU mask of 0,2-3, the buffer contains
three slots corresponding to CPUs 0, 2, and 3. CPU2 is therefore
expected to use slot 1 and CPU3 slot 2. Instead, the current code uses
slots 2 and 3 respectively, causing incorrect per-CPU values and an
out-of-bounds read from the update buffer for CPU3.
The corresponding lookup paths already use a dense offset while
iterating over possible CPUs. Do the same for the array, hash, and
cgroup storage update paths, advancing the source offset once for each
possible CPU. BPF_F_ALL_CPUS continues to use the same value for every
CPU. |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zoned: finish active block group cleanup if call_zone_finish() fails
do_zone_finish() clears BLOCK_GROUP_FLAG_ZONE_IS_ACTIVE before finishing
the zones. If call_zone_finish() then fails it returned early, leaving the
now inactive block group on fs_info->zone_active_bgs, leaking its
reference, the BTRFS_FS_NEED_ZONE_FINISH waiters are never woken, and as
its alloc_offset equals the zone capacity btrfs_zone_finish_one_bg() keeps
selecting it, spinning btrfs_zoned_activate_one_bg().
Fall through to the cleanup on failure too and return the error, but keep
the block group read-only as its zones are left inconsistent. |
| In the Linux kernel, the following vulnerability has been resolved:
ASoC: fsl_micfil: balance mclk enable/disable
hw_params() enables mclk unconditionally and hw_free() disables it
unconditionally, but the PCM core does not guarantee 1:1 pairing:
hw_free() can run without hw_params(), and hw_params() can be called
multiple times from the SETUP state. This triggers an "already
disabled" WARN() in the first case and leaks an enable reference in
the second, leaving the clock ungateable.
Guard both sides with the existing mclk_flag, as fsl_sai.c does with
mclk_streams. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Dont send random pad bytes in RESET/ACTIVATE messages
The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer.
Replace the strcpy(data, l->if_name) with memcpy() so that the
pad bytes are actually written (l->if_name[] is zero padded)
rather than sending random bytes from the skb to the remote system.
Replace two other strcpy() with strscpy(). |
| In the Linux kernel, the following vulnerability has been resolved:
xfs: lock the healthmon when inserting unmount event
LOLLM complains that xfs_healthmon_unmount does an unlocked insert of
the unmount event into the health monitor's event list. Fix that. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/gud: validate GUD_ROTATION_0 is present in supported rotations
The rotation argument to drm_plane_create_rotation_property() is set to
DRM_MODE_ROTATE_0, and the device reported rotation bitmask is used as
the supported_rotations argument. The driver never validates that
GUD_ROTATION_0 is present, so a device that omits it from its
GUD_PROPERTY_ROTATION triggers the
WARN_ON(rotation & ~supported_rotations) in
drm_plane_create_rotation_property()
Fix this by skipping the creation of rotation property if the device
doesn't have the GUD_ROTATION_0 bit |
| In the Linux kernel, the following vulnerability has been resolved:
btrfs: zstd: fix lost wakeup when waiting for a workspace
A writer can sleep forever in zstd_get_workspace() even though a workspace
is free. When zstd_alloc_workspace() fails, the task is queued on
zwsm->wait and schedules unconditionally, never re-testing the pool.
zstd_put_workspace() publishes the workspace and then calls cond_wake_up(),
which only wakes when a sleeper is already visible, so a workspace returned
between the failed allocation and prepare_to_wait() wakes nobody. The
window is wide: zstd_alloc_workspace() goes through kvmalloc() and may
enter reclaim.
Only a max level workspace triggers the wakeup and one is deliberately kept
allocated as the fallback every waiter waits for, so once its wakeup is
lost the writer stays in TASK_UNINTERRUPTIBLE until some other task happens
to return one. Re-check the pool after prepare_to_wait() has published the
waiter, and use the workspace if one turned up. |
| In the Linux kernel, the following vulnerability has been resolved:
netfs: Fix subreq ref leak
Fix a subrequest ref leak in netfs_unbuffered_write() in the event that
subreq->io_iter ends up zero length during preparation. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: hci_qca: fix NULL pointer dereference in qca_setup() for non-serdev device
hu->serdev is NULL for hci_uart attached via non-serdev paths, but
qca_setup() unconditionally calls serdev_device_get_drvdata(hu->serdev)
and dereferences the result, causing a NULL pointer dereference.
Fix by guarding the dereference with a NULL check, consistent with the
rest of qca_setup(). |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: fix kmap_local leak in write_mft_record_nolock() error paths
write_mft_record_nolock() maps the MFT record folio with
kmap_local_folio(), but the pre_write_mst_fixup() and
bio_add_folio() failure paths jump to the error label without
unmapping it. kmap_local mappings are stack-ordered per task, so
leaking one corrupts the nesting for any outer mapping.
Unmap the folio on those error paths too. |
