| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| wlc is a Weblate command-line client using Weblate's REST API. Prior to 2.0.1, automatically discovered configuration from .weblate, .weblate.ini, or weblate.ini can select the API URL while an unscoped API token is supplied through WLC_KEY or --key without a matching WLC_URL or --url. When wlc runs in an untrusted repository, pull request checkout, or directory with untrusted ancestor configuration, it can send the token to an attacker-controlled project-configured URL. URL-scoped keys in [keys] are not affected. This issue is fixed in version 2.0.1. |
| In the Linux kernel, the following vulnerability has been resolved:
tipc: Dont send random pad bytes in RESET/ACTIVATE messages
The interface name is passed in a fixed length (TIPC_MAX_IF_NAME) buffer.
Replace the strcpy(data, l->if_name) with memcpy() so that the
pad bytes are actually written (l->if_name[] is zero padded)
rather than sending random bytes from the skb to the remote system.
Replace two other strcpy() with strscpy(). |
| Apache Airflow's `/assets/events` API returned asset events for every Dag in the deployment, with no filter restricting them to the Dags the caller is authorized to read. Any authenticated user holding asset-read access could therefore enumerate asset events — including the source Dag ID, task ID, run ID and event timestamps — for Dags they have no permission to see. Because the filter was also absent from the count query, `total_entries` and pagination disclosed the existence of hidden Dags even without inspecting individual rows. Deployments are affected whenever per-Dag access control is used to separate teams or tenants; no special configuration is required. Upgrade to apache-airflow 3.3.2 or later. |
| A vulnerability in the API endpoint of HPE Networking EdgeConnect SD-WAN Orchestrator could allow an unauthenticated remote attacker to obtain sensitive information. Successful exploitation could result in the disclosure of security-relevant configuration details and security feature status, which could be used to facilitate further attacks. |
| A vulnerability in the API of EdgeConnect SD-WAN Orchestrator could allow an authenticated remote attacker with low privileges to access sensitive information beyond what is authorized by the user's existing privilege level. Successful exploitation could allow an attacker to retrieve information which could be used to potentially gain further access to network services supported by EdgeConnect SD-WAN Orchestrator. |
| A vulnerability exists in the SD-WAN Orchestrator that may lead to the exposure of sensitive configuration information. An authenticated remote attacker with read-only privileges could exploit this vulnerability by sending a specially crafted request to the cache synchronization endpoint. Successful exploitation could result in the disclosure of sensitive third-party API tokens and credentials, potentially enabling lateral movement to external security platforms. |
| InvenTree is an Open Source Inventory Management System. Prior to 1.4.0, privileged staff users who can author report or label templates can cause WeasyPrint report rendering to retrieve attacker-selected resources through the HTTP and HTTPS URL schemes or the local file URI scheme. The HTML(string=html).write_pdf() path does not provide a restricted url_fetcher, and attach_to_model=True stores the original generated PDF before later processing, allowing fetched local files or internal HTTP response bodies to be recovered from embedded attachments. This enables full-read server-side request forgery, arbitrary local file disclosure including application credentials, and possible compromise of a superuser account. This issue is fixed in version 1.4.0. |
| punchin-email is a Cloudflare Email Worker that provides two-way role aliases while relaying mail to a private inbox. Prior to 1.5.0, handleInbound delivers inbound alias mail with message.forward(), which silently drops the added Reply-To header intended to route responses through the relay. When a correspondent sends mail to an alias and the operator replies, the mail client can send directly to the correspondent from the private FORWARD_TO inbox address, exposing that address. The disclosure is limited to the operator's own email address and does not expose third-party data or provide code execution or authentication bypass. This issue is fixed in version 1.5.0. |
| authentik is an open-source identity provider. Prior to 2026.2.7, 2026.5.7, and 2026.8.2, authentik API serializers return stored credentials when an account has view permission on an affected configuration, even when that account is not authorized to change the configuration or read its secrets. Affected configurations include one-time code delivery by mail or SMS, outbound provisioning targets, device trust integrations, identity sources, the Kubernetes outpost integration, applications using a client or shared secret, and applications using a proxy provider. Deployments are affected when view permission is granted to accounts that are not intended to read these credentials; deployments where every viewer is permitted to read them are not affected. This issue is fixed in versions 2026.2.7, 2026.5.7, and 2026.8.2. |
| Sensitive data exposure leading to admin/WLAN credential leak in ZTE ZXHN H298A 1.1 and H108N 2.6. A crafted request to the router web interface can expose sensitive device and account information. In affected builds, the response may include the administrator password and WLAN PSK, enabling authentication bypass and network compromise. Some firmware versions may expose only partial identifiers (e.g., serial number, ESSID, MAC addresses). |
| Unauthenticated credential disclosure in the wizard interface in ZTE ZXHN H188A V6.0.10P2_TE and V6.0.10P3N3_TE allows unauthenticated attackers on the local network to retrieve sensitive credentials from the router's web management interface, including the default administrator password, WLAN PSK, and PPPoE credentials. In some observed cases, configuration changes may also be performed without authentication. |
| Exposure of Sensitive Information to an Unauthorized Actor vulnerability in Erlang OTP ssh (ssh_sftpd module) allows File Discovery.
The SSH_FXP_READLINK handler in ssh_sftpd sends the raw result of file:read_link/2 to the client without calling chroot_filename/2 to strip the backend root prefix. An authenticated SFTP client can create a symlink inside the chroot pointing to /; ssh_sftpd resolves the target to the absolute backend root and stores it on disk. Reading the symlink back via SSH_FXP_READLINK returns that absolute path, for example /data/sftp, instead of the chrooted value /.
The information disclosed is the absolute filesystem path of the SFTP root directory and of any symlink targets within it. No file contents, credentials, or access to paths outside the root directory are obtainable through this issue alone.
This vulnerability is associated with program files lib/ssh/src/ssh_sftpd.erl.
This issue affects OTP from OTP 17.0 before OTP 27.3.4.13, OTP 28.5.0.2, and OTP 29.0.2, corresponding to ssh from 3.0.1 before 5.2.11.8, 5.5.2.1, and 6.0.1. Whether OTP before OTP 17.0, corresponding to ssh before 3.0.1, is affected is unknown. |
| phpMyFAQ is an open source FAQ web application. Prior to version 4.2.0-alpha, an authenticated SQL LIKE wildcard injection vulnerability in phpMyFAQ’s chat user search allows any logged-in user to bypass the intended display-name search filter and enumerate active users. The endpoint escapes SQL string syntax but does not escape `%` and `_`, which remain active `LIKE` wildcards. Version 4.2.0-alpha patches the issue. |
| A security vulnerability has been detected in O2OA up to 9.5.3/10.0.2. This vulnerability affects the function list of the file o2server/x_base_core_project/src/main/java/com/x/base/core/project/connection/CipherConnectionAction.java of the component Cipher Connection Handler. Such manipulation of the argument fileUrl leads to information disclosure. It is possible to launch the attack remotely. The exploit has been disclosed publicly and may be used. The vendor was contacted early about this disclosure but did not respond in any way. |
| A security flaw has been discovered in Intelliants Subrion CMS up to 4.2.1. This affects an unknown part of the file /actions.json?action=assign-owner. The manipulation of the argument q results in information disclosure. The attack can be executed remotely. The exploit has been released to the public and may be used for attacks. The vendor was contacted early about this disclosure but did not respond in any way. |
| Cinnamon's Kotaemon (all versions up to and including v0.12.0) multi-user chat interface contains multiple vulnerabilities due to incorrect authorization and improper access controls. There are four handler methods in `libs/ktem/ktem/pages/chat/control.py` that load a Conversation record by its ID without comparing the requester's `user_id` to the conversation's owner `Conversation.user`. This allows any authenticated user to perform the following actions:
1. Read other user's chat transcripts, RAG retrieval history, AI-generated plots, and chat suggestions.
2. Permanently delete another user's conversation.
3. Rename another user's conversation.
4. Overwrite another user's conversation's chat suggestion list. |
| A vulnerability was found in SPON Communications IP Network Audio Device XC-9603 1.2.3_20181106 Build 107. This affects the function loadCfg of the file /ini/sys_cfg.txt of the component Configuration File Download. The manipulation results in information disclosure. The attack can be launched remotely. The vendor was contacted early about this disclosure but did not respond in any way. |
| The Events Manager WordPress plugin before 7.4.5 does not force the scope of its logged-in event and location search when a caller supplies their own owner value, letting a low-privileged user read other accounts' unpublished, pending or trashed event and venue content, including full street addresses. |
| A vulnerability has been found in D-Link DIR-X1860Z up to 1.0.2.220120.165402. Affected is the function routerd.wificfg_get/routerd.get_rand_key of the component ubus JSON-RPC interface. Such manipulation leads to information disclosure. The attack must be carried out from within the local network. Upgrading to version 1.0.7.260821.161908 is able to address this issue. It is suggested to upgrade the affected component. This vulnerability only affects products that are no longer supported by the maintainer. |
| The Spectra Legacy – Gutenberg Blocks plugin for WordPress is vulnerable to Sensitive Information Exposure in all versions up to, and including, 2.20.0 via the editor_assets function, which exposes the uag_insta_linked_accounts option through the uagb_blocks_info object without a capability check. This makes it possible for authenticated attackers, with Contributor-level access and above, to extract sensitive data including raw Instagram Graph API access tokens configured by an administrator. Exploitation requires the Spectra Pro plugin to be active with a linked Instagram account. |
