| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Several Kafka deserialization paths read a size or count field from input data and use it directly to allocate an array, collection, or byte buffer, with no check against the bytes actually available. A small crafted input can therefore declare a very large size and force a multi-gigabyte allocation. The affected paths are, in Kafka Streams, ProcessorRecordContext (header count), ChangedDeserializer (varint value length), CombinedKeySchema (foreign-key length, which could also produce a negative size), ProcessorMetadata (key length), and AssignmentInfo group-assignment decoding; and, in the clients library, ListDeserializer (used by ListSerde).
Impact:
An attacker can trigger the oversized allocation and raise an OutOfMemoryError that crashes the affected consumer or Kafka Streams thread; the broker and the rest of the cluster are unaffected. The reachable surface depends on the path: writing a crafted record to a Streams application's internal changelog or repartition topics, or committing crafted offset metadata to its consumer group (Streams internal paths); writing a crafted record to any topic that a consumer reads with ListSerde (ListDeserializer); or, as a member of a Streams consumer group, returning crafted assignment data when elected leader (AssignmentInfo). Because a crafted record remains in its topic, the error can recur on restart. The record size limit (max.message.bytes) does not help, because the allocation is driven by a size field rather than by the input's length.
Mitigation:
Upgrade to Apache Kafka 4.2.2, 4.3.2, or 4.4.0. Where authorization is enabled, restrict write access to each application's internal topics and consumer group to its own principal, and restrict who can produce to topics that are consumed with ListSerde.
Resolution:
From Apache Kafka 4.2.2, 4.3.2, and 4.4.0: these deserialization paths validate the declared size against the remaining input before allocating and reject input that fails the check. |
| A Kafka broker using SASL/OAUTHBEARER with the default validator (sasl.oauthbearer.jwt.validator.class=DefaultJwtValidator) selects its implementation from configuration. When sasl.oauthbearer.jwks.endpoint.url is set, the validator verifies the JWT signature. When that URL is unset (the default) and no verification key resolver is supplied, DefaultJwtValidator silently falls back to ClientJwtValidator, which does not verify the JWT signature, algorithm, or issuer - and the broker starts with no warning or error. This is the residual of CVE-2026-33557, whose fix restored signature verification only on the path where the JWKS endpoint URL is set.
Impact:
A broker in this state accepts any structurally valid JWT, including "alg":"none" tokens. An unauthenticated remote attacker who can reach the listener can forge a token asserting any principal - including configured superusers - and gain full access to the cluster. Only brokers that enable SASL/OAUTHBEARER validation without a JWKS endpoint URL (and without a custom verification key resolver) are affected; brokers that set the URL verify signatures and are not affected. Unlike CVE-2026-110952 (issuer/audience not enforced by default), here no signature is verified at all.
Mitigation (all affected versions, no upgrade required):
Set sasl.oauthbearer.jwks.endpoint.url for every listener/mechanism that uses OAuthBearerValidatorCallbackHandler, or configure a signature-verifying sasl.oauthbearer.jwt.validator.class.
Resolution:
From Apache Kafka 4.2.2, 4.3.1, and 4.4.0: a broker that would fall back to the non-verifying ClientJwtValidator fails to start with a ConfigException instead of running without signature verification (secure by default). |
| A vulnerability was identified in Ndemic Creations Plague Inc Evolved up to 1.24.0.3. The affected element is an unknown function of the component Workshop Scenario Loader. Such manipulation leads to deserialization. The attack may be performed from remote. Upgrading to version 1.24.0.4 is sufficient to fix this issue. It is recommended to upgrade the affected component. |
| Use after free in Windows Message Queuing Queue Manager allows an authorized attacker to execute code locally. |
| Missing Authorization vulnerability in weDevs Happy Addons for Elementor happy-elementor-addons allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects Happy Addons for Elementor: from n/a through 3.50.1. |
| Missing authentication for critical function in Windows Health and Optimized Experiences Service allows an authorized attacker to elevate privileges locally. |
| Improper privilege management in Windows Internet (wininet.dll) allows an authorized attacker to perform spoofing locally. |
| Untrusted pointer dereference in Windows COM+ Event System Service allows an authorized attacker to elevate privileges locally. |
| Out-of-bounds read in Windows Hello allows an authorized attacker to disclose information locally. |
| In the Linux kernel, the following vulnerability has been resolved:
riscv: futex: untag the user pointer before the atomic access
access_ok() checks untagged_addr(uaddr), but arch_futex_atomic_op_inuser()
and futex_atomic_cmpxchg_inatomic() hand the raw uaddr to the inline asm
amoswap/amoadd/.../lr.w+sc.w through the "+m" (*uaddr) operand. When the
tagged address ABI is enabled (CONFIG_RISCV_ISA_SUPM, prctl
PR_SET_TAGGED_ADDR_CTRL with PMLEN != 0), those two addresses differ: a
user pointer whose top PMLEN bits hold a tag passes access_ok() after
untagging, but the atomic is then performed on the still-tagged raw
address.
Supervisor-mode data accesses are not subject to the U-mode pointer
masking (that is governed by menvcfg.PMM, which the kernel does not set),
so hardware does not strip the tag for the kernel's own access. With
Sv57 and PMLEN=16 the tag bits overlap the canonical-address bits, so a
tagged pointer can name a canonical kernel virtual address (e.g. in the
linear map) whose untagged form is a valid user address. An unprivileged
process can thus make FUTEX_WAKE_OP perform an atomic read-modify-write on
an arbitrary kernel address, with the matching FUTEX_OP_CMP_* result
serving as a read oracle.
get_user()/put_user()/raw_copy_{to,from}_user() already untag the pointer
after the access_ok() check; do the same in the futex helpers so the
atomic operates on the address that was actually validated. |
| In the Linux kernel, the following vulnerability has been resolved:
regulator: of: fill in supply names in of_regulator_bulk_get_all()
of_regulator_bulk_get_all() returns an array it allocated itself, and
fills in only the consumer of each entry. Every other way of getting a
bulk array has the supply name set, because the caller provides it, and
the core expects it to be there: regulator_bulk_enable() prints it when
a supply fails to enable, so a caller that hands such an array to it
dereferences uninitialised memory on that path.
Copy each name into the array's own allocation, right behind the
entries, so that it shares the array's lifetime and callers still have
nothing extra to free. That also retires the fixed 64 byte stack buffer
the names were assembled in, which is_supply_name() never bounded the
copy against. |
| In the Linux kernel, the following vulnerability has been resolved:
power: sequencing: pcie-m2: Fix leaking array from of_regulator_bulk_get_all()
of_regulator_bulk_get_all() allocates the consumers array and hands it to
the caller, who is expected to free it at an appropriate time.
pwrseq-pcie-m2.c never did, leading to a memory leak.
Add an explicit kfree() for the consumers array. |
| In the Linux kernel, the following vulnerability has been resolved:
net: team: free skb when broadcast has no txable port
bc_transmit() sends the original skb through the last txable port.
When no port is txable, it returns false without consuming the skb, but
team_xmit() still returns NETDEV_TX_OK. AF_PACKET sends then retain the
skb and its socket write-memory charge.
A TX-enabled, link-down port keeps the broadcast transmit op installed.
Carrier can stay up through a second link-up, TX-disabled port or be
forced on by userspace. Free the original skb on the no-port path while
leaving the existing drop accounting intact.
Discovered by Sashiko during review of previous commit. |
| In the Linux kernel, the following vulnerability has been resolved:
net: skbuff: don't leave stale bytes in skb_copy_and_csum_bits()
When skb_copy_and_csum_bits() reaches unreadable frags it returns 0
after copying only the linear part, and the rest of the caller's buffer
is left as it was. The callers copy into a buffer that is about to go
out on the wire: an ICMP error quoting the offending packet, or a
driver's TX bounce buffer in skb_copy_and_csum_dev(). Neither buffer
is zeroed beforehand, so whatever was in memory there gets sent.
Zero the part of the buffer we didn't fill. The checksum usually
won't match the data any more, so the receiver will usually drop the
packet, but either way it no longer carries anything it shouldn't.
Only zero for a positive @len, a negative one from a broken caller must
not turn into a huge memset(). |
| A flaw was found in OpenStack keystonemiddleware and Keystone. The code incorrectly treats the presence of the X-Service-Token HTTP header as sufficient to skip enforcement of application credential access rules (and can skip related token-binding checks). An attacker who holds an application credential with access_rules can bypass those restrictions by sending any non-empty X-Service-Token value; a valid service token is not required for this bypass when delay_auth_decision is enabled (typical). This allows API calls beyond what the credential was designed to permit within the attacker's existing roles. Only installing fixed keystonemiddleware and Keystone packages remediates the issue. |
| Heap-based buffer overflow in Microsoft Windows Search Component allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Partition Management Driver allows an unauthorized attacker to elevate privileges over a network. |
| Use after free in Windows Bind Filter Driver allows an authorized attacker to elevate privileges locally. |
| Missing Authorization vulnerability in weDevs WP ERP erp allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects WP ERP: from n/a through 1.17.10. |
| Authlib is a Python library which builds OAuth and OpenID Connect servers. Prior to 1.9.0, OpenIDImplicitGrant.validate_authorization_request() checks the client-controlled raw request.payload.scope for openid after the parent grant has filtered allowed scopes into request.scope. A registered client permitted an ID token response type but not the openid scope can add openid to the request, obtain user consent, and receive a signed ID token containing the user's subject and allowed profile claims. Authorization code flow and deployments that allow openid for every client permitted an ID token response are not affected. In authlib/oidc/core/grants/implicit.py, OpenIDImplicitGrant.validate_authorization_request() checks request.payload.scope instead of the filtered request.scope. This issue is fixed in version 1.9.0. |
