Export limit exceeded: 409109 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (409109 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-23341 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix crash when destroying a suspended hardware context If userspace issues an ioctl to destroy a hardware context that has already been automatically suspended, the driver may crash because the mailbox channel pointer is NULL for the suspended context. Fix this by checking the mailbox channel pointer in aie2_destroy_context() before accessing it. | ||||
| CVE-2026-23328 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix NULL pointer dereference of mgmt_chann mgmt_chann may be set to NULL if the firmware returns an unexpected error in aie2_send_mgmt_msg_wait(). This can later lead to a NULL pointer dereference in aie2_hw_stop(). Fix this by introducing a dedicated helper to destroy mgmt_chann and by adding proper NULL checks before accessing it. | ||||
| CVE-2026-108066 | 2026-10-15 | 2.7 Low | ||
| The WP 2FA WordPress plugin before 4.2.0 does not perform an object-level capability check before removing a user's two-factor authentication configuration, allowing a site administrator on WordPress Multisite to remove the 2FA configuration of users outside their own site, including accounts they are not permitted to edit. On single-site installs an administrator can already manage all users, so this crosses a trust boundary only on Multisite. | ||||
| CVE-2026-106469 | 2026-10-15 | 6.8 Medium | ||
| The Gutenverse Form WordPress plugin before 3.0.11 does not sanitize SVG icon markup stored in its form blocks before it is decoded and inserted into the page in the browser, allowing authenticated users with Contributor-level access and above to store malicious SVG that executes JavaScript in the session of any user who views or previews the affected form, such as an administrator reviewing a pending post. | ||||
| CVE-2026-106031 | 2026-10-15 | 6.5 Medium | ||
| The Spin Wheel WordPress plugin before 2.2.1 does not verify that a visitor actually performed a legitimate spin before returning and consuming a configured prize coupon, allowing unauthenticated users to disclose and drain the stored coupon codes of any campaign, including unpublished ones. | ||||
| CVE-2026-104643 | 2026-10-15 | 4.2 Medium | ||
| The Easy HTTPS Redirection (SSL) WordPress plugin before 2.0.2 does not perform capability checks in some of its AJAX actions, allowing any authenticated user, such as a Subscriber, to read URLs its content scanner collected from private and draft posts and from site options, and to trigger a site-wide rewrite of those URLs, once an administrator has run a scan. | ||||
| CVE-2026-103324 | 2026-10-15 | 5.3 Medium | ||
| The Cardinity Payment Gateway for WooCommerce WordPress plugin before 3.4.2 does not properly verify the authenticity of the payment notifications it receives, as the secret used to sign them is empty by default, allowing unauthenticated attackers to forge an approved-payment notification and mark arbitrary orders as paid, or force them to failed. | ||||
| CVE-2026-103304 | 2026-10-15 | 5.3 Medium | ||
| The eaSYNC Booking WordPress plugin before 1.3.31 does not perform authorization or nonce checks on several of its cancellation-related AJAX actions, allowing unauthenticated users to create booking cancellation requests, trigger booking notification emails, and overwrite the content of the emails the site sends. | ||||
| CVE-2025-71313 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: PCI: endpoint: Add missing NULL check for alloc_workqueue() alloc_workqueue() can return NULL on memory allocation failure. Without proper error checking, this may lead to a NULL pointer dereference when queue_work() is later called with the NULL workqueue pointer in epf_ntb_epc_init(). Add a NULL check immediately after alloc_workqueue() and return -ENOMEM on failure to prevent the driver from loading with an invalid workqueue pointer. | ||||
| CVE-2025-71308 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix potential NULL pointer dereference in context cleanup aie_destroy_context() is invoked during error handling in aie2_create_context(). However, aie_destroy_context() assumes that the context's mailbox channel pointer is non-NULL. If mailbox channel creation fails, the pointer remains NULL and calling aie_destroy_context() can lead to a NULL pointer dereference. In aie2_create_context(), replace aie_destroy_context() with a function which request firmware to remove the context created previously. | ||||
| CVE-2025-71303 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 4.7 Medium |
| In the Linux kernel, the following vulnerability has been resolved: accel/amdxdna: Fix race condition when checking rpm_on When autosuspend is triggered, driver rpm_on flag is set to indicate that a suspend/resume is already in progress. However, when a userspace application submits a command during this narrow window, amdxdna_pm_resume_get() may incorrectly skip the resume operation because the rpm_on flag is still set. This results in commands being submitted while the device has not actually resumed, causing unexpected behavior. The set_dpm() is called by suspend/resume, it relied on rpm_on flag to avoid calling into rpm suspend/resume recursivly. So to fix this, remove the use of the rpm_on flag entirely. Instead, introduce aie2_pm_set_dpm() which explicitly resumes the device before invoking set_dpm(). With this change, set_dpm() is called directly inside the suspend or resume execution path. Otherwise, aie2_pm_set_dpm() is called. | ||||
| CVE-2025-40158 | 1 Linux | 1 Linux Kernel | 2026-10-15 | 8.1 High |
| In the Linux kernel, the following vulnerability has been resolved: ipv6: use RCU in ip6_output() Use RCU in ip6_output() in order to use dst_dev_rcu() to prevent possible UAF. We can remove rcu_read_lock()/rcu_read_unlock() pairs from ip6_finish_output2(). | ||||
| CVE-2025-38204 | 2 Debian, Linux | 2 Debian Linux, Linux Kernel | 2026-10-15 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: jfs: fix array-index-out-of-bounds read in add_missing_indices stbl is s8 but it must contain offsets into slot which can go from 0 to 127. Added a bound check for that error and return -EIO if the check fails. Also make jfs_readdir return with error if add_missing_indices returns with an error. | ||||
| CVE-2025-2586 | 1 Redhat | 1 Openshift Lightspeed | 2026-10-15 | 7.5 High |
| A flaw was found in the OpenShift Lightspeed Service, which is vulnerable to unauthenticated API request flooding. Repeated queries to non-existent endpoints inflate metrics storage and processing, consuming excessive resources. This issue can lead to monitoring system degradation, increased disk usage, and potential service unavailability. Since the issue does not require authentication, an external attacker can exhaust CPU, RAM, and disk space, impacting both application and cluster stability. | ||||
| CVE-2026-85321 | 1 Microsoft | 10 Windows Server 2012 R2, Windows Server 2012 R2, Windows Server 2012 R2 (server Core Installation) and 7 more | 2026-10-15 | 7.5 High |
| Allocation of resources without limits or throttling in Active Directory Federation Services (AD FS) allows an unauthorized attacker to deny service over a network. | ||||
| CVE-2026-39781 | 2 Dan Rossiter, Wordpress-extensions | 2 Document Gallery, Document Gallery | 2026-10-15 | 7.1 High |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in Dan Rossiter Document Gallery document-gallery allows Reflected XSS.This issue affects Document Gallery: from n/a through 5.1.1. | ||||
| CVE-2026-103224 | 2026-10-15 | N/A | ||
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the MySQL message decoder aggregates inbound multi-packet payloads into a composite direct-memory buffer without any cumulative size limit. A malicious, compromised, or man-in-the-middle MySQL server can send a continuous stream of packets with the maximum payload length (0xFFFFFF), preventing the end-of-message condition from being reached, causing unbounded direct-memory allocation on the client and leading to an out-of-memory crash. This occurs before authentication completes. The impacted component is io.vertx:vertx-mysql-client. | ||||
| CVE-2026-102461 | 2026-10-15 | N/A | ||
| In Eclipse Vert.x versions [4.0.0, 4.5.34] or [5.0.0,5.0.12] or [5.1.0,5.1.9] or [5.2.0, 5.2.0], the uniqueItems keyword validation uses an O(n²) pairwise comparison loop with no short-circuit or size limit. A remote unauthenticated attacker can submit a moderately-sized JSON array that consumes disproportionate CPU time, leading to denial of service. The impacted component is io.vertx:vertx-json-schema. The following Vert.x modules depend on vertx-json-schema and are also affected: io.vertx:vertx-web-openapi-router io.vertx:vertx-web-validation io.vertx:vertx-openapi | ||||
| CVE-2026-46449 | 2026-10-15 | 6.7 Medium | ||
| The Akamai Guardicore Platform Agent (GPA) before 7.4 for macOS is affected by a local privilege escalation vulnerability within the wapptunneld component. The vulnerability is caused by a lack of input validation when the service uses network interface names to execute system utilities, resulting in command injection. An unprivileged local user with permissions to modify network interface names can exploit this by renaming a network interface to include a malicious shell payload via System Settings. When the "Log out from your IdP" action is subsequently triggered, the wapptunneld service processes the poisoned interface name, leading to the execution of arbitrary commands with root privileges. | ||||
| CVE-2025-62850 | 2 Qnap, Qnap Systems | 2 Quts Hero, Quts Hero | 2026-10-15 | 7.2 High |
| A NULL pointer dereference vulnerability has been reported to affect QTS, QVP, QuTS cloud and QuTS hero. If a remote attacker gains an administrator account, they can then exploit the vulnerability to launch a denial-of-service (DoS) attack. We have already fixed the vulnerability in the following version: QTS 5.2.9.3410 build 20260214 and later QVP 2.7.4 and later QuTS cloud c5.2.9.3468 build 20260413 and later QuTS hero h5.2.9.3410 build 20260214 and later QuTS hero h5.3.4.3500 build 20260520 and later QuTS hero h6.0.0.3459 build 20260409 and later | ||||