| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Release of invalid pointer or reference in Windows Modern Device Management (MDM) allows an authorized attacker to elevate privileges locally. |
| In the Linux kernel, the following vulnerability has been resolved:
ext4: free the sbi after a grace period
ext4_get_link() follows a symlink that keeps its target in a data block
in rcu pathwalk mode with ext4_getblk(EXT4_GET_BLOCKS_CACHED_NOWAIT).
That reads s_mount_state in the ASSERT() of ext4_getblk() and again in
ext4_es_lookup_extent(), and the lookup bumps the extent status hit or
miss counter, all through sb->s_fs_info.
ext4_put_super() destroys those counters, clears sb->s_fs_info and frees
the sbi without waiting for a grace period. A pathwalk that is still in
ext4_get_link() when the last reference to the mount goes away then
dereferences a NULL s_fs_info, the freed sbi or the destroyed percpu
counters.
With a pathwalk held up in ext4_get_link() while the last reference
goes away:
KASAN: null-ptr-deref in range [0x00000000000000a8-0x00000000000000af]
RIP: 0010:ext4_getblk+0xf0/0x640
Call Trace:
<TASK>
ext4_get_link+0x26c/0x410
pick_link+0xf96/0x1780
step_into_slowpath+0x9b8/0x1250
path_lookupat+0x484/0xb00
filename_lookup+0x1f1/0x5b0
vfs_statx+0xd7/0x3b0
vfs_fstatat+0x4d/0x90
__do_sys_newfstatat+0xa0/0x100
do_syscall_64+0x10e/0x5e0
entry_SYSCALL_64_after_hwframe+0x77/0x7f
So far that has been hard to hit. umount(2) waits for a grace period in
namespace_unlock() before it drops the mount, so only a mount whose last
reference goes away elsewhere, like the close of a file or a chdir out of
a lazily unmounted directory, can race a walker.
Keep sb->s_fs_info and free the sbi together with the extent status
counters after a grace period. Split the counters out of
ext4_es_unregister_shrinker() for that. The shrinker still gets wasted
in ext4_put_super(), the counters go with the sbi. |
| In the Linux kernel, the following vulnerability has been resolved:
KVM: nVMX: Reset MMU back to the root MMU if loading L2 state fails for !VM-Entry
Reset the vCPU's MMU pointer back to the root MMU if loading L2 state fails
in the "not from VM-Entry" case, i.e. when emulating RSM or handling
KVM_SET_NESTED_STATE. Failure to unwind the MMU pointer results in KVM
trying to run L1 with a nested MMU, and is especially problematic if the
vCPU manages to free its nested state before the VM crashes. Constructing
the root for a nested EPT MMU goes through vmcs12, which is dynamically
allocated/freed when nVMX is enabled/disabled. And so if the nested state
is freed with the MMU still pointing at the nested MMU, KVM will hit a NULL
pointer deref when attempting to get L1=>L2 EPTP.
BUG: kernel NULL pointer dereference, address: 0000000000000078
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 114a2d067 P4D 111743067 PUD 11141f067 PMD 0
Oops: Oops: 0000 [#1] SMP
CPU: 20 UID: 1000 PID: 1272 Comm: nested_tdp_faul Not tainted 7.3.0-rc4-8c89f11d1a99b-sink-vm #1914 PREEMPTLAZY
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 0.0.0 02/06/2015
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
Call Trace:
<TASK>
kvm_mmu_load+0xcd/0x870 [kvm]
kvm_arch_vcpu_ioctl_run+0x18f5/0x1f80 [kvm]
kvm_vcpu_ioctl+0x2c7/0x970 [kvm]
__x64_sys_ioctl+0x90/0xd0
do_syscall_64+0x9c/0x4d0
entry_SYSCALL_64_after_hwframe+0x4b/0x53
RIP: 0033:0x47491b
</TASK>
Modules linked in: kvm_intel kvm irqbypass
CR2: 0000000000000078
---[ end trace 0000000000000000 ]---
RIP: 0010:nested_ept_get_eptp+0xb/0x10 [kvm_intel]
[sean: write changelog] |
| Use after free in Windows Autopilot allows an authorized attacker to elevate privileges locally. |
| Heap-based buffer overflow in Windows Hyper-V allows an authorized attacker to elevate privileges locally. |
| Improper Neutralization of Input During Web Page Generation ('Cross-site Scripting') vulnerability in WP Grids EasyTest – Simplify A/B Testing convertpro allows DOM-Based XSS.This issue affects EasyTest – Simplify A/B Testing: from n/a through 1.0.1. |
| Missing Authorization vulnerability in WP Grids EasyTest – Simplify A/B Testing convertpro allows Exploiting Incorrectly Configured Access Control Security Levels.This issue affects EasyTest – Simplify A/B Testing: from n/a through 1.0.1. |
| Exposure of sensitive system information to an unauthorized control sphere in Windows iSCSI allows an authorized attacker to disclose information locally. |
| Improper verification of cryptographic signature in Windows Key Distribution Center allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Program Compatibility Assistant Service allows an authorized attacker to elevate privileges locally. |
| Use after free in Windows Storage allows an authorized attacker to elevate privileges locally. |
| Improper certificate validation in PkixNameConstraintValidator in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows an attacker who controls, or can obtain certificates from, a name-constrained intermediate CA to have certificates accepted during PKIX certification path validation for email addresses, DNS names or URI hosts that lie within excluded subtrees applying to that CA, via an rfc822Name, dNSName or uniformResourceIdentifier name whose host ends with a dot, because names and constraints were compared without first removing the RFC 1034 root-label trailing dot, so a fully qualified host name did not match an excluded subtree for the same host written without the dot. |
| In the Linux kernel, the following vulnerability has been resolved:
ksmbd: fill in FileSysIdentifier in FS_POSIX_INFORMATION
smb2_get_info_filesystem() reports 56 bytes for FS_POSIX_INFORMATION,
that is the whole of FILE_SYSTEM_POSIX_INFO, but never assigns
FileSysIdentifier. Those eight bytes go to the client as they are found
in the response buffer.
The buffer is zeroed on allocation, so a standalone request leaks
nothing. A compound request can leak: the offset of the next response
is advanced by the length pinned for the previous one, so a reply that
was written into the buffer and then dropped in favour of the short
error response of smb2_set_err_rsp() stays there, and the next reply is
laid over it with only the header cleared.
Report the file system id statfs() returned, which is what the field is
for. FileSysIdentifier is __le64 and f_fsid is a pair of ints, so
assemble the value first, val[0] as the low half, and convert it on the
way out. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/amdgpu/userq: actually validate userq BOs
This was supposed to loop over the individual evicted list, as the
kernel and always_valid evicted lists were already handled in
amdgpu_vm_validate.
Without this, BOs that were created and evicted before a userq was made
would never end up in an eviction fence rearm.
Also add the missing ref to the BO before drm_exec locks and refs it.
(cherry picked from commit 18decfc9e8cc0fa70b6de9944cc27a37729edfbd) |
| In the Linux kernel, the following vulnerability has been resolved:
s390/pci: Fix leak of uninitialized kernel data in SCLP report
While report_error_write() checks that the provided buffer is at least
as large as the header struct, but not that it is large enough to
contain the report with the length claimed by report->length. If
user-space provides a short buffer, meaning a larger report->length than
the actually written payload, up to around 4K of kernel data from past
the kmalloc(len + 1) sized buffer allocated in kernfs_fop_write_iter()
will leak into the SCLP report.
However, as the entity processing the SCLP is privileged and able to
access at least the page including the report, this does not leak data
that entity could not access but it is still an out of bounds read and
a malformed error report that should be rejected. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix hist trigger timestamps for buffered events
Syzkaller triggered a WARN_ON_ONCE(!nest) warning:
WARNING: kernel/trace/ring_buffer.c:821 at ring_buffer_event_time_stamp
Call trace:
ring_buffer_event_time_stamp
hist_field_timestamp
hist_fn_call
event_hist_trigger
event_triggers_call
__event_trigger_test_discard
trace_event_buffer_commit
do_trace_event_raw_event_sched_switch
trace_event_raw_event_sched_switch
The warning is probabilistically reproducible and is related to syzkaller
executing the following commands:
echo 'prev_pid == 999999' > events/sched/sched_switch/filter
echo 'hist:keys=common_timestamp' > events/sched/sched_switch/trigger
The specific triggering process is as follows:
CPU 0 CPU 1
(context switching) (echo 'hist:keys=common_timestamp' > \
events/sched/sched_switch/trigger)
do_trace_event_raw_event_##call
trace_event_buffer_lock_reserve
if (!tr->no_filter_buffering_ref &&
trace_file->flags & EVENT_FILE_FL_FILTERED)
return entry; // return directly
event_hist_trigger_parse
hist_register_trigger
tracing_set_filter_buffering(file->tr, true);
tr->no_filter_buffering_ref++;
__trace_buffer_lock_reserve
rb_start_commit
local_inc(&cpu_buffer->committing); // skipped and not executed
trace_event_buffer_commit
__event_trigger_test_discard
event_triggers_call
event_hist_trigger
hist_fn_call
hist_field_timestamp
ring_buffer_event_time_stamp
nest = local_read(&cpu_buffer->committing);
WARN_ON_ONCE(!nest) // trigger warning
The root cause is that when an event file has a filter attached and the
hist trigger has not yet been attached, trace_event_buffer_lock_reserve()
writes the event into the per-CPU trace_buffered_event temp buffer instead
of reserving it in the ring buffer, so cpu_buffer->committing is not
incremented. When the event is later processed at commit time by a hist
trigger, hist_field_timestamp() -> ring_buffer_event_time_stamp() sees a
zero committing count, triggering WARN_ON_ONCE(!nest).
tracing_event_time_stamp() was added by commit d8279bfc5e959 ("tracing:
Add tracing_event_time_stamp() API") for exactly this case: if the event
is the per-CPU trace_buffered_event, it returns the current ring buffer
timestamp. But it never gained a caller. Use it in hist_field_timestamp(),
so that a hist trigger that races onto a buffered event records the
current time, which is only marginally later than when the event was
recorded, instead of warning and recording a bogus timestamp. |
| In the Linux kernel, the following vulnerability has been resolved:
tracing: Fix crash in print_graph_function_event()
tracing_set_tracer() assigns the flags of the newly selected tracer
with:
tr->current_trace_flags = t->flags ? : t->tracer->flags;
If the new tracer defines neither static flags nor default flags, like
hwlat, irqsoff or wakeup, add_tracer() has no per instance flags copy
for it, and both operands are NULL, so tr->current_trace_flags ends up
being NULL as well.
The ring buffer is not cleared when switching tracers: it is reset
inside tracer_init(), after current_trace_flags was already assigned.
If the buffer still holds function_graph entries of the previous
tracer, printing one of them dereferences the NULL pointer. This was
hit by cat trace during an ftrace stress test:
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor read access in kernel mode
RIP: 0010:print_graph_function_event+0xe/0x20
Call Trace:
s_show+0x4d/0x110
seq_read_iter+0x2d4/0x490
seq_read+0x130/0x170
vfs_read+0xb5/0x370
ksys_read+0x6d/0xe0
do_syscall_64+0xbc/0x450
The snapshot buffer is not reset at all, so this can be reproduced
without a race:
echo function_graph > /sys/kernel/tracing/current_tracer
echo 1 > /sys/kernel/tracing/snapshot
echo hwlat > /sys/kernel/tracing/current_tracer
cat /sys/kernel/tracing/snapshot
Rather than teaching every user of tr->current_trace_flags about this
corner case, make sure it is never NULL: when the newly selected
tracer has no flags at all, tracing_set_tracer() falls back to a
static empty no_tracer_flags. run_tracer_selftest() can hit the same
case, so the same fallback is added there too. The existing users
already handle opts == NULL, so these tracers keep behaving as before. |
| In the Linux kernel, the following vulnerability has been resolved:
sched_ext: Fix use-after-free of a destroyed user DSQ by a deferred reenqueue
A deferred reenqueue can read a freed user DSQ. The request stays on its
CPU's deferred list until run_deferred() takes it, and the RCU callback that
frees the DSQ assumes that the grace period has flushed it, so exit_dsq()
checks the per-CPU node without the deferred list lock. A grace period waits
for readers in flight, not for a pending run_deferred(). A run_deferred()
which starts after the grace period began can detach the request right
before the callback looks and then read the freed DSQ's id.
Cancel the pending requests before the grace period instead. The irq work
that frees the DSQ unlinks every CPU's request under the per-CPU deferred
list lock, and schedule_dsq_reenq() ignores a new request under the same
lock once the id is invalid. Only a run_deferred() that started before the
grace period can hold a request, and it runs with IRQs disabled, so the
grace period waits for it and nothing touches the DSQ after the callback. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/xe: Don't transfer shrinker pages for pinned bos on purgeable state change
Pinned bos have their pages removed from the shrinker's shrinkable /
purgeable counts on pin, and added back on unpin according to the
bo's purgeable state at that time.
However, xe_bo_set_purgeable_shrinker() unconditionally transfers
pages between the shrinkable and purgeable counts. If the purgeable
state of a pinned bo changes, for example by userspace madvising
DONTNEED on a VMA of a bo that is also pinned as a scanout buffer,
this underflows one count and, after unpin, leaves the other one
permanently inflated.
Only update the purgeable flag for pinned bos, and leave the page
accounting to unpin.
(cherry picked from commit afe6bc012034123fd838328668e609bf57e46bd3) |
| Memory allocation with excessive size value in the HSS/LMS signature code (HssPublicKeyParameters, HssSignature) in Legion of the Bouncy Castle Inc. bc-csharp before 2.7.0 allows a remote unauthenticated attacker who can supply both an HSS public key and a signature to cause a denial of service through memory exhaustion via a public key encoding with an excessive level count, because the level count L read when parsing an HSS public key was not checked against the RFC 8554 maximum of 8, and signature parsing then allocated an array of L - 1 entries before reading any further signature data. A single verification can commit up to about 17 GB of memory or fail with an OutOfMemoryException. |
