| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| A vulnerability in the application software of multiple Radiometer products may allow remote code execution and unauthorized device management when specific internal conditions are met. Exploitation requires that a remote connection is established with additional information obtained through other means. The issue is caused by a weakness in the analyzer’s application software. Other related CVE's are CVE-2025-14095 & CVE-2025-14096. Affected customers have been informed about this vulnerability. This CVE is being published to provide transparency.
Required Configuration for Exposure: Affected application software version is in use and remote support feature is enabled in the analyzer. Temporary work Around: If the network is not considered secure, please remove the analyzer from the network. Permanent solution:
Customers should ensure the following:
• The network is secure, and access follows best practices.
Local Radiometer representatives will contact all affected customers to discuss a permanent solution.
Exploit Status:
Researchers have provided working proof-of-concept (PoC). Radiometer is not aware of any publicly available exploits at the time of this publication. |
| Hugging Face Diffusers CogView4 Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Hugging Face Diffusers. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of checkpoints. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27424. |
| Hugging Face Accelerate Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Hugging Face Accelerate. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of checkpoints. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27985. |
| Hugging Face smolagents Remote Python Executor Deserialization of Untrusted Data Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Hugging Face smolagents. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the parsing of pickle data. The issue results from the lack of proper validation of user-supplied data, which can result in deserialization of untrusted data. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-28312. |
| Trimble SketchUp SKP File Parsing Use-After-Free Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Trimble SketchUp. User interaction is required to exploit this vulnerability in that the target must visit a malicious page or open a malicious file.
The specific flaw exists within the parsing of SKP files. The issue results from the lack of validating the existence of an object prior to performing operations on the object. An attacker can leverage this vulnerability to execute code in the context of the current process. Was ZDI-CAN-27769. |
| Ollama MCP Server execAsync Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Ollama MCP Server. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the implementation of the execAsync method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-27683. |
| Framelink Figma MCP Server fetchWithRetry Command Injection Remote Code Execution Vulnerability. This vulnerability allows remote attackers to execute arbitrary code on affected installations of Framelink Figma MCP Server. Authentication is not required to exploit this vulnerability.
The specific flaw exists within the implementation of the fetchWithRetry method. The issue results from the lack of proper validation of a user-supplied string before using it to execute a system call. An attacker can leverage this vulnerability to execute code in the context of the service account. Was ZDI-CAN-27877. |
| The Ready_ application's Profile section allows users to upload files of any type and extension without restriction. If the server is misconfigured, as it was by default when installed at the turn of 2021 and 2022, it can result in Remote Code Execution. Refer to the Required Configuration for Exposure section for more information. |
| A critical remote code execution (RCE) vulnerability exists in the web-based management interface of GatesAir Maxiva UAXT, VAXT transmitters when debugging mode is enabled. An attacker with a valid session ID (sess_id) can send specially crafted POST requests to the /json endpoint, enabling arbitrary command execution on the underlying system. This vulnerability can lead to full system compromise, including unauthorized access, privilege escalation, and potentially full device takeover. |
| A Use After Free vulnerability on UniFi Protect Cameras could allow a Remote Code Execution (RCE) by a malicious actor with access to UniFi Protect Cameras management network. |
| An Improper Neutralization of Escape Sequences vulnerability could allow an Authentication Bypass with a Remote Code Execution (RCE) by a malicious actor with access to UniFi Protect Cameras adjacent network. |
| A Remote Code Execution Vulnerability exists in the product and version listed above. The vulnerability is due to lack of input sanitation and could allow a remote attacker to run commands or code as a high privileged user. |
| Path traversal may allow remote code execution using privileged account
(requires device admin account, cannot be performed by a regular user).
In combination with the 'Upload' functionality this could be used to
execute an arbitrary script or possibly an uploaded binary. Remediation
in Version 6.7.0, release date: 20-Oct-24. |
| The Honeywell Experion PKS
and OneWireless WDM
contains an Integer Underflow
vulnerability
in the component Control Data Access (CDA). An attacker could potentially exploit this vulnerability, leading to a Communication Channel Manipulation, which could result in a failure during subtraction allowing remote code execution.
Honeywell recommends updating to the most recent version of
Honeywell Experion PKS:520.2 TCU9 HF1 and 530.1 TCU3 HF1 and OneWireless: 322.5 and 331.1.
The affected Experion PKS products are C300 PCNT02, C300 PCNT05, FIM4, FIM8, UOC, CN100, HCA, C300PM, and C200E. The Experion PKS versions affected are from 520.1 through 520.2 TCU9 and from 530 through 530 TCU3. The OneWireless WDM affected versions are 322.1 through 322.4 and 330.1 through 330.3. |
| NETGEAR XR1000 before 1.0.0.74, XR1000v2 before 1.1.0.22, and XR500 before 2.3.2.134 allow remote code execution by unauthenticated users. |
| Crayfish is a collection of Islandora 8 microservices, one of which, Homarus, provides FFmpeg as a microservice. Prior to Crayfish version 4.1.0, remote code execution may be possible in web-accessible installations of Homarus in certain configurations. The issue has been patched in `islandora/crayfish:4.1.0`. Some workarounds are available. The exploit requires making a request against the Homarus's `/convert` endpoint; therefore, the ability to exploit is much reduced if the microservice is not directly accessible from the Internet, so: Prevent general access from the Internet from hitting Homarus. Alternatively or additionally, configure auth in Crayfish to be more strongly required, such that requests with `Authorization` headers that do not validate are rejected before the problematic CLI interpolation occurs. |
| The ICTBroadcast application unsafely passes session cookie data to shell processing, allowing an attacker to inject shell commands into a session cookie that get executed on the server. This results in unauthenticated remote code execution in the session handling.
Versions 7.4 and below are known to be vulnerable. |
| A vulnerability in the file creation process on the command line interface of AOS-8 Instant and AOS-10 AP could allow an authenticated remote attacker to perform remote code execution (RCE). Successful exploitation could allow an attacker to execute arbitrary operating system commands on the underlying operating system leading to potential system compromise. |
| binance-trading-bot is an automated Binance trading bot with trailing buy/sell strategy. Authenticated users of binance-trading-bot can achieve Remote Code Execution on the host system due to a command injection vulnerability in the `/restore` endpoint. The restore endpoint of binance-trading-bot is vulnerable to command injection via the `/restore` endpoint. The name of the uploaded file is passed to shell.exec without sanitization other than path normalization, resulting in Remote Code Execution. This may allow any authorized user to execute code in the context of the host machine. This issue has been addressed in version 0.0.100 and all users are advised to upgrade. There are no known workarounds for this vulnerability. |
| Sitecore Experience Manager (XM) and Experience Platform (XP) 10.4 before KB1002844 allow remote code execution through insecure deserialization. |
