Export limit exceeded: 408316 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (36348 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-31590 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: KVM: SEV: Drop WARN on large size for KVM_MEMORY_ENCRYPT_REG_REGION Drop the WARN in sev_pin_memory() on npages overflowing an int, as the WARN is comically trivially to trigger from userspace, e.g. by doing: struct kvm_enc_region range = { .addr = 0, .size = -1ul, }; __vm_ioctl(vm, KVM_MEMORY_ENCRYPT_REG_REGION, &range); Note, the checks in sev_mem_enc_register_region() that presumably exist to verify the incoming address+size are completely worthless, as both "addr" and "size" are u64s and SEV is 64-bit only, i.e. they _can't_ be greater than ULONG_MAX. That wart will be cleaned up in the near future. if (range->addr > ULONG_MAX || range->size > ULONG_MAX) return -EINVAL; Opportunistically add a comment to explain why the code calculates the number of pages the "hard" way, e.g. instead of just shifting @ulen. | ||||
| CVE-2026-31560 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: spi-dw-dma: fix print error log when wait finish transaction If an error occurs, the device may not have a current message. In this case, the system will crash. In this case, it's better to use dev from the struct ctlr (struct spi_controller*). | ||||
| CVE-2026-31476 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.2 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: do not expire session on binding failure When a multichannel session binding request fails (e.g. wrong password), the error path unconditionally sets sess->state = SMB2_SESSION_EXPIRED. However, during binding, sess points to the target session looked up via ksmbd_session_lookup_slowpath() -- which belongs to another connection's user. This allows a remote attacker to invalidate any active session by simply sending a binding request with a wrong password (DoS). Fix this by skipping session expiration when the failed request was a binding attempt, since the session does not belong to the current connection. The reference taken by ksmbd_session_lookup_slowpath() is still correctly released via ksmbd_user_session_put(). | ||||
| CVE-2026-31409 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 8.8 High |
| In the Linux kernel, the following vulnerability has been resolved: ksmbd: unset conn->binding on failed binding request When a multichannel SMB2_SESSION_SETUP request with SMB2_SESSION_REQ_FLAG_BINDING fails ksmbd sets conn->binding = true but never clears it on the error path. This leaves the connection in a binding state where all subsequent ksmbd_session_lookup_all() calls fall back to the global sessions table. This fix it by clearing conn->binding = false in the error path. | ||||
| CVE-2026-23371 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: sched/deadline: Fix missing ENQUEUE_REPLENISH during PI de-boosting Running stress-ng --schedpolicy 0 on an RT kernel on a big machine might lead to the following WARNINGs (edited). sched: DL de-boosted task PID 22725: REPLENISH flag missing WARNING: CPU: 93 PID: 0 at kernel/sched/deadline.c:239 dequeue_task_dl+0x15c/0x1f8 ... (running_bw underflow) Call trace: dequeue_task_dl+0x15c/0x1f8 (P) dequeue_task+0x80/0x168 deactivate_task+0x24/0x50 push_dl_task+0x264/0x2e0 dl_task_timer+0x1b0/0x228 __hrtimer_run_queues+0x188/0x378 hrtimer_interrupt+0xfc/0x260 ... The problem is that when a SCHED_DEADLINE task (lock holder) is changed to a lower priority class via sched_setscheduler(), it may fail to properly inherit the parameters of potential DEADLINE donors if it didn't already inherit them in the past (shorter deadline than donor's at that time). This might lead to bandwidth accounting corruption, as enqueue_task_dl() won't recognize the lock holder as boosted. The scenario occurs when: 1. A DEADLINE task (donor) blocks on a PI mutex held by another DEADLINE task (holder), but the holder doesn't inherit parameters (e.g., it already has a shorter deadline) 2. sched_setscheduler() changes the holder from DEADLINE to a lower class while still holding the mutex 3. The holder should now inherit DEADLINE parameters from the donor and be enqueued with ENQUEUE_REPLENISH, but this doesn't happen Fix the issue by introducing __setscheduler_dl_pi(), which detects when a DEADLINE (proper or boosted) task gets setscheduled to a lower priority class. In case, the function makes the task inherit DEADLINE parameters of the donoer (pi_se) and sets ENQUEUE_REPLENISH flag to ensure proper bandwidth accounting during the next enqueue operation. | ||||
| CVE-2025-40005 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: spi: cadence-quadspi: Implement refcount to handle unbind during busy driver support indirect read and indirect write operation with assumption no force device removal(unbind) operation. However force device removal(removal) is still available to root superuser. Unbinding driver during operation causes kernel crash. This changes ensure driver able to handle such operation for indirect read and indirect write by implementing refcount to track attached devices to the controller and gracefully wait and until attached devices remove operation completed before proceed with removal operation. | ||||
| CVE-2025-38626 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: f2fs: fix to trigger foreground gc during f2fs_map_blocks() in lfs mode w/ "mode=lfs" mount option, generic/299 will cause system panic as below: ------------[ cut here ]------------ kernel BUG at fs/f2fs/segment.c:2835! Call Trace: <TASK> f2fs_allocate_data_block+0x6f4/0xc50 f2fs_map_blocks+0x970/0x1550 f2fs_iomap_begin+0xb2/0x1e0 iomap_iter+0x1d6/0x430 __iomap_dio_rw+0x208/0x9a0 f2fs_file_write_iter+0x6b3/0xfa0 aio_write+0x15d/0x2e0 io_submit_one+0x55e/0xab0 __x64_sys_io_submit+0xa5/0x230 do_syscall_64+0x84/0x2f0 entry_SYSCALL_64_after_hwframe+0x76/0x7e RIP: 0010:new_curseg+0x70f/0x720 The root cause of we run out-of-space is: in f2fs_map_blocks(), f2fs may trigger foreground gc only if it allocates any physical block, it will be a little bit later when there is multiple threads writing data w/ aio/dio/bufio method in parallel, since we always use OPU in lfs mode, so f2fs_map_blocks() does block allocations aggressively. In order to fix this issue, let's give a chance to trigger foreground gc in prior to block allocation in f2fs_map_blocks(). | ||||
| CVE-2025-21845 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: mtd: spi-nor: sst: Fix SST write failure 'commit 18bcb4aa54ea ("mtd: spi-nor: sst: Factor out common write operation to `sst_nor_write_data()`")' introduced a bug where only one byte of data is written, regardless of the number of bytes passed to sst_nor_write_data(), causing a kernel crash during the write operation. Ensure the correct number of bytes are written as passed to sst_nor_write_data(). Call trace: [ 57.400180] ------------[ cut here ]------------ [ 57.404842] While writing 2 byte written 1 bytes [ 57.409493] WARNING: CPU: 0 PID: 737 at drivers/mtd/spi-nor/sst.c:187 sst_nor_write_data+0x6c/0x74 [ 57.418464] Modules linked in: [ 57.421517] CPU: 0 UID: 0 PID: 737 Comm: mtd_debug Not tainted 6.12.0-g5ad04afd91f9 #30 [ 57.429517] Hardware name: Xilinx Versal A2197 Processor board revA - x-prc-02 revA (DT) [ 57.437600] pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 57.444557] pc : sst_nor_write_data+0x6c/0x74 [ 57.448911] lr : sst_nor_write_data+0x6c/0x74 [ 57.453264] sp : ffff80008232bb40 [ 57.456570] x29: ffff80008232bb40 x28: 0000000000010000 x27: 0000000000000001 [ 57.463708] x26: 000000000000ffff x25: 0000000000000000 x24: 0000000000000000 [ 57.470843] x23: 0000000000010000 x22: ffff80008232bbf0 x21: ffff000816230000 [ 57.477978] x20: ffff0008056c0080 x19: 0000000000000002 x18: 0000000000000006 [ 57.485112] x17: 0000000000000000 x16: 0000000000000000 x15: ffff80008232b580 [ 57.492246] x14: 0000000000000000 x13: ffff8000816d1530 x12: 00000000000004a4 [ 57.499380] x11: 000000000000018c x10: ffff8000816fd530 x9 : ffff8000816d1530 [ 57.506515] x8 : 00000000fffff7ff x7 : ffff8000816fd530 x6 : 0000000000000001 [ 57.513649] x5 : 0000000000000000 x4 : 0000000000000000 x3 : 0000000000000000 [ 57.520782] x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff0008049b0000 [ 57.527916] Call trace: [ 57.530354] sst_nor_write_data+0x6c/0x74 [ 57.534361] sst_nor_write+0xb4/0x18c [ 57.538019] mtd_write_oob_std+0x7c/0x88 [ 57.541941] mtd_write_oob+0x70/0xbc [ 57.545511] mtd_write+0x68/0xa8 [ 57.548733] mtdchar_write+0x10c/0x290 [ 57.552477] vfs_write+0xb4/0x3a8 [ 57.555791] ksys_write+0x74/0x10c [ 57.559189] __arm64_sys_write+0x1c/0x28 [ 57.563109] invoke_syscall+0x54/0x11c [ 57.566856] el0_svc_common.constprop.0+0xc0/0xe0 [ 57.571557] do_el0_svc+0x1c/0x28 [ 57.574868] el0_svc+0x30/0xcc [ 57.577921] el0t_64_sync_handler+0x120/0x12c [ 57.582276] el0t_64_sync+0x190/0x194 [ 57.585933] ---[ end trace 0000000000000000 ]--- [pratyush@kernel.org: add Cc stable tag] | ||||
| CVE-2026-23254 | 1 Linux | 1 Linux Kernel | 2026-06-01 | 5.5 Medium |
| In the Linux kernel, the following vulnerability has been resolved: net: gro: fix outer network offset The udp GRO complete stage assumes that all the packets inserted the RX have the `encapsulation` flag zeroed. Such assumption is not true, as a few H/W NICs can set such flag when H/W offloading the checksum for an UDP encapsulated traffic, the tun driver can inject GSO packets with UDP encapsulation and the problematic layout can also be created via a veth based setup. Due to the above, in the problematic scenarios, udp4_gro_complete() uses the wrong network offset (inner instead of outer) to compute the outer UDP header pseudo checksum, leading to csum validation errors later on in packet processing. Address the issue always clearing the encapsulation flag at GRO completion time. Such flag will be set again as needed for encapsulated packets by udp_gro_complete(). | ||||
| CVE-2026-48906 | 2 Tassos, Tassos.gr | 16 Advanced Custom Fields, Convert Forms, Engagebox and 13 more | 2026-06-01 | 8.1 High |
| The vulnerability in the Tassos Framework Plugin allows users to delete arbitrary files on the affected sites. | ||||
| CVE-2026-32244 | 1 Discourse | 1 Discourse | 2026-06-01 | 5.3 Medium |
| Discourse is an open-source discussion platform. In versions prior to 2026.1.4, 2026.3.1, 2026.4.1 and 2026.5.0-latest.1, outdated cached AI summaries can leak removed content to anonymous and unprivileged users who cannot regenerate summaries. This issue has been fixed in versions 2026.1.4, 2026.3.1, 2026.4.1 and 2026.5.0-latest.1. To work around this issue, restrict summary generation by tightening the allowed groups on the summarization Personas. | ||||
| CVE-2023-3271 | 2 Sick, Sick Ag | 3 Icr890-4, Icr890-4 Firmware, Icr890-4 | 2026-06-01 | 8.2 High |
| Improper Access Control in the SICK ICR890-4 could allow an unauthenticated remote attacker to gather information about the system and download data via the REST API by accessing unauthenticated endpoints. | ||||
| CVE-2023-3273 | 2 Sick, Sick Ag | 3 Icr890-4, Icr890-4 Firmware, Icr890-4 | 2026-06-01 | 7.5 High |
| Improper Access Control in the SICK ICR890-4 could allow an unauthenticated remote attacker to affect the availability of the device by changing settings of the device such as the IP address based on missing access control. | ||||
| CVE-2026-45878 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 The address watch clear code receives watch_id as an unsigned value (u32), but some helper functions were using a signed int and checked bits by shifting with watch_id. If a very large watch_id is passed from userspace, it can be converted to a negative value. This can cause invalid shifts and may access memory outside the watch_points array. drm/amdkfd: Fix watch_id bounds checking in debug address watch v2 Fix this by checking that watch_id is within MAX_WATCH_ADDRESSES before using it. Also use BIT(watch_id) to test and clear bits safely. This keeps the behavior unchanged for valid watch IDs and avoids undefined behavior for invalid ones. Fixes the below: drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c:448 kfd_dbg_trap_clear_dev_address_watch() error: buffer overflow 'pdd->watch_points' 4 <= u32max user_rl='0-3,2147483648-u32max' uncapped drivers/gpu/drm/amd/amdgpu/../amdkfd/kfd_debug.c 433 int kfd_dbg_trap_clear_dev_address_watch(struct kfd_process_device *pdd, 434 uint32_t watch_id) 435 { 436 int r; 437 438 if (!kfd_dbg_owns_dev_watch_id(pdd, watch_id)) kfd_dbg_owns_dev_watch_id() doesn't check for negative values so if watch_id is larger than INT_MAX it leads to a buffer overflow. (Negative shifts are undefined). 439 return -EINVAL; 440 441 if (!pdd->dev->kfd->shared_resources.enable_mes) { 442 r = debug_lock_and_unmap(pdd->dev->dqm); 443 if (r) 444 return r; 445 } 446 447 amdgpu_gfx_off_ctrl(pdd->dev->adev, false); --> 448 pdd->watch_points[watch_id] = pdd->dev->kfd2kgd->clear_address_watch( 449 pdd->dev->adev, 450 watch_id); v2: (as per, Jonathan Kim) - Add early watch_id >= MAX_WATCH_ADDRESSES validation in the set path to match the clear path. - Drop the redundant bounds check in kfd_dbg_owns_dev_watch_id(). | ||||
| CVE-2026-46115 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 9.8 Critical |
| In the Linux kernel, the following vulnerability has been resolved: block: add pgmap check to biovec_phys_mergeable biovec_phys_mergeable() is used by the request merge, DMA mapping, and integrity merge paths to decide if two physically contiguous bvec segments can be coalesced into one. It currently has no check for whether the segments belong to different dev_pagemaps. When zone device memory is registered in multiple chunks, each chunk gets its own dev_pagemap. A single bio can legitimately contain bvecs from different pgmaps -- iov_iter_extract_bvecs() breaks at pgmap boundaries but the outer loop in bio_iov_iter_get_pages() continues filling the same bio. If such bvecs are physically contiguous, biovec_phys_mergeable() will coalesce them, making it impossible to recover the correct pgmap for the merged segment via page_pgmap(). Add a zone_device_pages_have_same_pgmap() check to prevent merging bvec segments that span different pgmaps. | ||||
| CVE-2026-46105 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: scsi: mpt3sas: Limit NVMe request size to 2 MiB The HBA firmware reports NVMe MDTS values based on the underlying drive capability. However, because the driver allocates a fixed 4K buffer for the PRP list, accommodating at most 512 entries, the driver supports a maximum I/O transfer size of 2 MiB. Limit max_hw_sectors to the smaller of the reported MDTS and the 2 MiB driver limit to prevent issuing oversized I/O that may lead to a kernel oops. | ||||
| CVE-2026-46100 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: fs: afs: revert mmap_prepare() change Partially reverts commit 9d5403b1036c ("fs: convert most other generic_file_*mmap() users to .mmap_prepare()"). This is because the .mmap invocation establishes a refcount, but .mmap_prepare is called at a point where a merge or an allocation failure might happen after the call, which would leak the refcount increment. Functionality is being added to permit the use of .mmap_prepare in this case, but in the interim, we need to fix this. | ||||
| CVE-2026-46085 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.5 High |
| In the Linux kernel, the following vulnerability has been resolved: rxrpc: Fix rxkad crypto unalignment handling Fix handling of a packet with a misaligned crypto length. Also handle non-ENOMEM errors from decryption by aborting. Further, remove the WARN_ON_ONCE() so that it can't be remotely triggered (a trace line can still be emitted). | ||||
| CVE-2026-46076 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.9 High |
| In the Linux kernel, the following vulnerability has been resolved: KVM: nSVM: Raise #UD if unhandled VMMCALL isn't intercepted by L1 Explicitly synthesize a #UD for VMMCALL if L2 is active, L1 does NOT want to intercept VMMCALL, nested_svm_l2_tlb_flush_enabled() is true, and the hypercall is something other than one of the supported Hyper-V hypercalls. When all of the above conditions are met, KVM will intercept VMMCALL but never forward it to L1, i.e. will let L2 make hypercalls as if it were L1. The TLFS says a whole lot of nothing about this scenario, so go with the architectural behavior, which says that VMMCALL #UDs if it's not intercepted. Opportunistically do a 2-for-1 stub trade by stub-ifying the new API instead of the helpers it uses. The last remaining "single" stub will soon be dropped as well. [sean: rewrite changelog and comment, tag for stable, remove defunct stubs] | ||||
| CVE-2026-45933 | 1 Linux | 1 Linux Kernel | 2026-05-30 | 7.8 High |
| In the Linux kernel, the following vulnerability has been resolved: bpf: Preserve id of register in sync_linked_regs() sync_linked_regs() copies the id of known_reg to reg when propagating bounds of known_reg to reg using the off of known_reg, but when known_reg was linked to reg like: known_reg = reg ; both known_reg and reg get same id known_reg += 4 ; known_reg gets off = 4, and its id gets BPF_ADD_CONST now when a call to sync_linked_regs() happens, let's say with the following: if known_reg >= 10 goto pc+2 known_reg's new bounds are propagated to reg but now reg gets BPF_ADD_CONST from the copy. This means if another link to reg is created like: another_reg = reg ; another_reg should get the id of reg but assign_scalar_id_before_mov() sees BPF_ADD_CONST on reg and assigns a new id to it. As reg has a new id now, known_reg's link to reg is broken. If we find new bounds for known_reg, they will not be propagated to reg. This can be seen in the selftest added in the next commit: 0: (85) call bpf_get_prandom_u32#7 ; R0=scalar() 1: (57) r0 &= 255 ; R0=scalar(smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 2: (bf) r1 = r0 ; R0=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) R1=scalar(id=1,smin=smin32=0,smax=umax=smax32=umax32=255,var_off=(0x0; 0xff)) 3: (07) r1 += 4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=4,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 4: (a5) if r1 < 0xa goto pc+4 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=10,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 5: (bf) r2 = r0 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) R2=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=255) 6: (a5) if r1 < 0xe goto pc+2 ; R1=scalar(id=1+4,smin=umin=smin32=umin32=14,smax=umax=smax32=umax32=259,var_off=(0x0; 0x1ff)) 7: (35) if r0 >= 0xa goto pc+1 ; R0=scalar(id=2,smin=umin=smin32=umin32=6,smax=umax=smax32=umax32=9,var_off=(0x0; 0xf)) 8: (37) r0 /= 0 div by zero When 4 is verified, r1's bounds are propagated to r0 but r0 also gets BPF_ADD_CONST (bug). When 5 is verified, r0 gets a new id (2) and its link with r1 is broken. After 6 we know r1 has bounds [14, 259] and therefore r0 should have bounds [10, 255], therefore the branch at 7 is always taken. But because r0's id was changed to 2, r1's new bounds are not propagated to r0. The verifier still thinks r0 has bounds [6, 255] before 7 and execution can reach div by zero. Fix this by preserving id in sync_linked_regs() like off and subreg_def. | ||||