| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
cxl/features: Reject Get Feature count larger than the output buffer
cxlctl_get_feature() sizes its output buffer from the user's
fwctl_rpc.out_len, but the device is told to write
cxl_mbox_get_feat_in.count bytes into rpc_out->payload, which is a
separate user-controlled value. Nothing bounds count against out_len, so
a small out_len with a large count overflows the kvzalloc()'d buffer.
A heap OOB write reachable from FWCTL_RPC.
Reject requests where count exceeds the available payload room, before
allocating. |
| On affected platforms running Arista EOS with IGMP (Internet Group Management Protocol) snooping configured (enabled by default on all VLANs), a network-adjacent unauthenticated attacker can send malformed network packets on an affected VLAN to cause the IGMP snooping agent to terminate unexpectedly. This results in a temporary disruption of multicast traffic management, which may cause multicast traffic to be flooded to all ports of the affected VLAN until the service recovers. Repeated exploitation could result in a prolonged loss of intended multicast forwarding behavior. |
| PLANET IGS-5225-8P2T4S industrial managed switch V1 and V2 firmware versions before 1.2412b260707 and 2.2412b260519 contain a stack-based buffer overflow in the web server. Insufficient bounds checking on data copied into a stack buffer allows a remote authenticated attacker to cause a denial of service or potentially execute arbitrary code on the underlying operating system. |
| libheif is a HEIF and AVIF file format decoder and encoder. Prior to 1.23.2, the public heif_region_item_add_region_inline_mask_data() function in libheif/api/libheif/heif_regions.cc accepts mask_data_len without verifying that it equals the byte count required by width and height. A later heif_region_get_mask_image() call derives the read length from the region geometry, so an undersized stored buffer causes heif_region_get_inline_mask_image() to read beyond the heap allocation and copy adjacent bytes into the returned monochrome mask image. This can disclose heap data or crash an application that constructs region metadata through the writer API, while the file-parsing path is not affected because it validates the canonical mask size. This issue is fixed in version 1.23.2. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Drop scalar id on sign-extending narrowing stack fills
When a spilled scalar is filled back with a sign-extending narrowing load
(BPF_MEMSX), check_stack_read_fixed_off() copies the spilled register
including its scalar id, but coerce_reg_to_size_sx() then sign-extends the
filled register's value. If the same slot is also filled with a plain
zero-extending load (BPF_MEM), both destination registers share the id yet
hold different values. A later 'if <zext-reg> == const' then refines the
sign-extended register through sync_linked_regs() to a value it does not
have at runtime (e.g. the verifier believes 0x80000000 while the register
is 0xffffffff80000000), which can be turned into an out-of-bounds access.
Drop the shared scalar id at the sign-extension site in check_mem_access()
when sign extension actually changes the value, mirroring the BPF_MOVSX
handling in check_alu_op() (no_sext = reg_umax < 2^(size*8-1)). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath12k: fix stride mismatch in mac_phy_caps_parse()
Currently, in ath12k_wmi_mac_phy_caps_parse(), kzalloc() sizes the
mac_phy_caps buffer as tot_phy_id * len, where len is clamped to
min(firmware_len, sizeof(struct ath12k_wmi_mac_phy_caps_params)). The
subsequent memcpy() destination advances by sizeof(full struct) per slot
via C pointer arithmetic, not by the clamped len. When firmware sends
short TLVs, the second and later slots are written past the end of the
allocation.
The reader in ath12k_pull_mac_phy_cap_svc_ready_ext() also indexes the
buffer with full-struct pointer arithmetic, so the allocation must match
that stride.
Fix by using kzalloc_objs(), which derives the element size from the
pointer type, making allocation size and pointer stride provably
consistent regardless of what len the firmware provides.
Tested-on: WCN7850 hw2.0 PCI WLAN.HMT.1.1.c7-00108-QCAHMTSWPL_V1.0_V2.0_SILICONZ_UPSTREAM-3 |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 IBM MQ C client could allow a remote attacker to cause a denial of service or potentially execute arbitrary code due to improper validation of queue manager responses when requesting AMS policy data. |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 could allow an authenticated attacker to obtain sensitive information or cause a denial of service due to improper validation of message header offset values. |
| IBM MQ for HPE NonStop 8.1.0 through 8.1.0.40 could allow an authenticated attacker to cause a denial of service or potentially execute arbitrary code during queue manager startup due to improper validation of cluster migration data. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: mt7996: fix out-of-bounds link array access in mt7996_tx()
When mac80211 leaves the link unspecified, mt7996_tx() substitutes the
primary link id of the station or vif. That value is
IEEE80211_LINK_UNSPECIFIED (0xf) until the first link has been added,
and it is then used unchecked to index vif->link_conf[],
mvif->mt76.link[] and sta->link[], all of which hold
IEEE80211_MLD_MAX_NUM_LINKS (15) entries.
Clamp the primary link id to the default link before using it, and use
the clamped value for the link_sta fallback as well. |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: mt76: fix out-of-bounds access in mmio copy helpers
mt76_mmio_write_copy() and mt76_mmio_read_copy() iterate up to
ALIGN(len, 4), so a length that is not a multiple of four reads past the
source buffer (write_copy) or writes past the destination (read_copy).
Copy the aligned body in the loop and handle the remaining tail through a
4-byte bounce buffer, keeping the register access width unchanged. |
| In the Linux kernel, the following vulnerability has been resolved:
drm/bridge: tc358767: clamp the reported AUX read size to the request
tc_aux_transfer() clamps an AUX read to the payload limit:
size_t size = min_t(size_t, DP_AUX_MAX_PAYLOAD_BYTES - 1, msg->size);
After the transfer it replaces size with the byte count the controller
reports in AUX_BYTES:
if (size)
size = FIELD_GET(AUX_BYTES, auxstatus);
AUX_BYTES is GENMASK(15, 8), so it can be up to 255. Nothing clamps it
back to the request. tc_aux_read_data() reads that many bytes into the
16-byte auxrdata stack buffer, then copies them into the caller buffer. A
reported count of 255 makes the read run to 256 bytes and overruns both.
The controller should never report more than it was asked to transfer, so
this is defense in depth rather than a live hole. The reported count is
only lightly trusted, and the check is cheap. Clamp it back to the request,
the same way ti-sn65dsi86 does in commit aca58eac52b8 ("drm/bridge:
ti-sn65dsi86: Never store more than msg->size bytes in AUX xfer"). |
| In the Linux kernel, the following vulnerability has been resolved:
wifi: ath6kl: avoid buffer overreads in WMI event handlers
The following WMI event handlers currently read from the event buffer
without first verifying that the message was large enough to hold the
expected event:
ath6kl_wmi_scan_complete_rx()
ath6kl_wmi_addba_req_event_rx()
ath6kl_wmi_delba_req_event_rx()
Add length checks to prevent overread. |
| In the Linux kernel, the following vulnerability has been resolved:
RDMA/nldev: validate dynamic counter attribute length
RDMA_NLDEV_ATTR_STAT_HWCOUNTERS is a nested attribute whose children are
consumed directly with nla_get_u32(). The top-level policy validates only
the container, so it does not establish the fixed shape of each child.
Require every child payload to be exactly one u32 before reading it. |
| In the Linux kernel, the following vulnerability has been resolved:
crypto: keembay - Fix AEAD unregister count in error path
register_aes_algs() registers the AEAD algorithms before registering the
skcipher algorithms. If skcipher registration fails, the function unwinds
the earlier AEAD registration with crypto_engine_unregister_aeads(), but it
passes ARRAY_SIZE(algs), which is the skcipher table size.
Use ARRAY_SIZE(algs_aead) for the AEAD unwind path so the unregister helper
iterates over the same table that was registered. Also clarify the nearby
comment: the crypto registration helpers clean up algorithms registered
within the same call, while this function must still unwind earlier
successful registration steps. |
| In the Linux kernel, the following vulnerability has been resolved:
HID: roccat: bound device-supplied profile index
kone_keep_values_up_to_date() and kone_profile_activated() use an
8-bit, device-supplied profile value as an index into the 5-element
kone->profiles[] array without a range check. A malicious USB device
claiming the Roccat Kone id can send a switch-profile event (or a
startup_profile read at probe) with an out-of-range value and make the
driver read out of bounds; the result is exposed via the actual_dpi
sysfs attribute.
Reject out-of-range indices in both paths.
This was found with static analysis and confirmed with the KUnit test
added in the following patch (KASAN: slab-out-of-bounds). |
| In the Linux kernel, the following vulnerability has been resolved:
usb: ljca: bound bank_num in ljca_enumerate_gpio()
ljca_enumerate_gpio() reads desc->bank_num from the device and loops
valid_pin[i] = get_unaligned_le32(...) for i < bank_num. valid_pin[]
holds only LJCA_MAX_GPIO_NUM / 32 = 2 entries.
Two checks run before the loop. The reply length must match
struct_size(desc, bank_desc, bank_num). The product
pins_per_bank * bank_num must not exceed LJCA_MAX_GPIO_NUM. Neither one
bounds bank_num against the size of valid_pin[]. The reply is capped at
LJCA_MAX_PAYLOAD_SIZE (60) bytes, so the struct_size check limits
bank_num to 9. A device that reports bank_num 9 with pins_per_bank 7
still passes both checks. gpio_num is 63 and the reply is 56 bytes. The
loop then writes nine u32 into the two entry array and overruns
valid_pin[] on the stack.
A broken or malicious LJCA device can therefore overflow the stack.
Reject a bank_num that does not fit valid_pin[]. |
| In the Linux kernel, the following vulnerability has been resolved:
bpf: Reject arena frees below the arena base
bpf_arena_free_pages() accepts scalar arena addresses. The runtime
masks the address to the low 32 bits and reconstructs a full user
address from the arena base before returning the range to the arena
free tree.
When the scalar value is below the low 32 bits of the arena base,
full_uaddr falls below user_vm_start. The existing upper-end clipping
then turns this into an out-of-range free-tree offset. A later
allocation can reuse that offset and return an address below the arena
mapping.
Reject such frees before computing the clipped range. |
| In the Linux kernel, the following vulnerability has been resolved:
dax/fsdev: clear vmemmap_shift when binding static pgmap
Clear pgmap->vmemmap_shift for static DAX devices. When rebinding a static
device from device_dax (which may set vmemmap_shift based on alignment) to
fsdev_dax, the stale vmemmap_shift persists on the shared pgmap. Explicitly
zero it before devm_memremap_pages() so the vmemmap is built for order-0
folios as fsdev requires. |
| In the Linux kernel, the following vulnerability has been resolved:
IB/isert: reject login PDUs declaring more data than was received
isert_login_recv_done() records how many bytes the HCA actually placed in
the login buffer, but nothing compares that against the length the login
PDU's BHS declares. isert_rx_login_req() copies min(login_req_len,
MAX_KEY_VALUE_PAIRS) bytes into login->req_buf, and the login code then
reads the declared length back out of that buffer - for the first PDU in
iscsi_target_locate_portal(),
payload_length = ntoh24(login_req->dlength);
tmpbuf = kmemdup_nul(login->req_buf, payload_length, GFP_KERNEL);
and for the ones after it in iscsi_decode_text_input(), reached from
iscsi_target_do_login().
login->req_buf is a fixed MAX_KEY_VALUE_PAIRS (8192) byte allocation, so
an initiator that declares more than it sends reads off the end of it,
before authentication and with the length under its control:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff8881056a8000 by task iscsi_np/167
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_target_locate_portal+0x48d/0x1180
iscsi_target_login_thread+0x19a9/0x3350
Allocated by task 167:
__kmalloc_cache_noprof+0x158/0x370
iscsi_target_login_thread+0x971/0x3350
which belongs to the cache kmalloc-8k of size 8192
allocated 8192-byte region
Falsifying the second login PDU instead reaches the other reader, on the
same buffer:
BUG: KASAN: slab-out-of-bounds in kmemdup_nul+0x43/0x80
Read of size 8193 at addr ffff888104d10000 by task kworker/1:1/50
Workqueue: isert_login_wq iscsi_target_do_login_rx
__asan_memcpy+0x23/0x60
kmemdup_nul+0x43/0x80
iscsi_decode_text_input+0xc6/0x11c0
iscsi_target_do_login+0x261/0x1470
iscsi_target_do_login_rx+0x51d/0x7d0
iscsit over TCP is not exposed: iscsit_get_login_rx() validates the
declared length with iscsi_target_check_login_request() and then reads
exactly that many bytes off the socket, so the declared length governs
how much arrives rather than how much is copied out of an already-filled
buffer. isert does not call iscsi_target_check_login_request() at all.
Reject a login PDU whose declared DataSegmentLength exceeds what was
received, in both paths that reach isert_rx_login_req():
isert_get_login_rx() for the first login PDU and isert_login_recv_done()
for the ones after it. dlength <= login_req_len is allowed because the
received count can include up to three bytes of iSCSI padding.
Once the check is in place the copy out can no longer exceed the copy in:
the posted login SGE is ISER_RX_PAYLOAD_SIZE, so login_req_len cannot
exceed MAX_KEY_VALUE_PAIRS and the min() in isert_rx_login_req() is
login_req_len.
Like the existing short-PDU check added by 29e7b925ae6d, the reject in
isert_login_recv_done() returns without completing login_req_comp, so a
malformed subsequent PDU leaves the login to be torn down by the login
timer rather than failing immediately. The first-PDU path returns an
error and fails straight away.
Reproduced on 7.2.0-rc4 with soft-RoCE (rdma_rxe) under KASAN, using an
initiator that sends the real key=value payload while declaring 8193 in
the BHS, on the first login PDU and on the second in separate runs. The
reported read size tracks the declared value exactly; 16384 and 61440
behave the same. Unpatched 3 of 3 runs report on each of the two paths,
patched 0 of 3 on both, run alternately in a single session, and a normal
login still completes on the patched build. |
