| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| Improper Restriction of XML External Entity Reference vulnerability in Apache Camel Saxon component.
This issue affects Apache Camel: from 4.0.0 before 4.18.5, from 4.19.0 before 4.22.2.
XQueryBuilder in camel-saxon, which evaluates expressions for the xquery language and the xquery component, built its default Saxon Configuration with parse options that set only a whitespace stripping rule, leaving the XML parser at its defaults, under which a DOCTYPE declaration is accepted and external entities are resolved. A message body of type String or byte[], or any body read as an InputStream, is first turned into a javax.xml.transform.Source by Camel's own XML type converters, which configure the parser against external entities, so those bodies were not affected. A body that was already a Source, however, was handed to Saxon unchanged, and when that Source still had to be parsed, as a stream-based Source does, Saxon parsed it with that Configuration, bypassing the protection applied to the other body types. Such a body arises, for example, after a route converts the message with convertBodyTo(Source.class), or when a component or processor earlier in the route sets the body to a stream-based Source. A DOCTYPE with an external subset, or an external entity, declared in that body was therefore resolved and expanded into the document the expression was evaluated against. An external sender whose XML reaches an XQuery expression or an xquery endpoint in that form could read files readable by the Camel process and cause the process to issue requests to hosts the document names. No non-default option is required, since the default Configuration is used whenever the route does not supply one of its own.
Users are recommended to upgrade to version 4.23.0, which fixes the issue. If users are on the 4.22.x releases stream, then they are suggested to upgrade to 4.22.2. If users are on the 4.18.x releases stream, then they are suggested to upgrade to 4.18.5. The 4.14.x releases stream and earlier, as well as the 4.15.x to 4.17.x and 4.19.x to 4.21.x release lines, reached end of life before this issue was resolved and will not receive a fix, so deployments on them must move to a supported release. For deployments that cannot upgrade immediately, do not evaluate XQuery over a message body that is already a javax.xml.transform.Source when that body carries XML from an untrusted sender, or set the configuration option of the xquery endpoint or language to a Saxon Configuration whose parse options refuse a DOCTYPE declaration and disable external entities and external DTD loading, which is what the fixed releases now apply by default. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: MGMT: Fix status of pending commands flushed on power off
cmd_complete_rsp() receives a struct cmd_lookup and, for a pending
command that has no cmd_complete callback, falls through to
cmd_status_rsp(cmd, data). cmd_status_rsp() reads data as a u8 *, so
the status sent comes from the first byte of match->sk's
representation, not from match->mgmt_status.
commit f53e1c9c726d ("Bluetooth: MGMT: Fix possible crash on
mgmt_index_removed") changed the callers' data from &status to &match
and updated the cmd_complete branch to match->mgmt_status, but left
the fall-through passing data unchanged.
In mgmt_index_removed() match->sk is NULL, so every such command is
answered with status 0x00 (Success) instead of
MGMT_STATUS_INVALID_INDEX. In __mgmt_power_off() it is NULL too,
unless a Set Powered command was pending: then settings_rsp() has
stored that command's socket in match->sk, and the byte sent comes
from the socket pointer. Either way the status the caller set,
MGMT_STATUS_NOT_POWERED (or MGMT_STATUS_INVALID_INDEX when the device
is being unregistered), is lost.
Pass the status the callers set.
This was seen on a QCA9377 laptop: bluetoothd's Start Discovery,
pending when the adapter was powered off, was answered with Command
Status 0x00 and no parameters, and bluetoothd 5.72 crashed on the
zero-length success. BlueZ master has since added the length check
on that path ("adapter: Fix crash on short start discovery reply",
BlueZ a734b06059cb), but userspace should still be told Not Powered,
not Success.
Tested on Ubuntu 7.0.0-31 with a virtual controller (hci_vhci):
power off is held in HCI Write Scan Enable while a Start Discovery is
submitted, and the flush answers it with status 0x00 before this
change and 0x0f (Not Powered) after. |
| In the Linux kernel, the following vulnerability has been resolved:
mm: don't schedule deferred kernel page table freeing while booting
Booting with a boot-time function tracer and a filter, for example
ftrace=function ftrace_filter=pud_free_pmd_page
panics on 7.3-rc4 as soon as the tracer starts:
[ 23.531178] Starting tracer 'function'
[ 23.675800] Oops: general protection fault, probably for non-canonical address 0xdffffc0000000038: 0000 [#1] SMP KASAN NOPTI
[ 23.819917] KASAN: null-ptr-deref in range [0x00000000000001c0-0x00000000000001c7]
[ 23.964025] CPU: 0 UID: 0 PID: 0 Comm: swapper Not tainted 7.3.0-rc4-fe2ec83746e5-with-fixes-v2+ #195 PREEMPT(undef)
[ 24.252248] RIP: 0010:__queue_work+0xab/0xf00
[ 25.981629] Call Trace:
[ 26.125727] <TASK>
[ 26.413912] ? pagetable_free_kernel+0x20/0x120
[ 26.990283] queue_work_on+0x97/0xf0
[ 27.134382] __cpa_collapse_large_pages+0x501/0x6f0
[ 27.566662] cpa_flush+0x394/0x620
[ 27.998953] change_page_attr_set_clr+0x321/0x4a0
[ 29.151729] set_memory_rox+0xa2/0xf0
[ 29.584018] create_trampoline+0x431/0x6f0
...
[ 44.343347] Kernel panic - not syncing: Attempted to kill the idle task!
The boot-time tracer is started from early_trace_init(), which runs
before workqueue_init_early(). Making its trampoline read-only splits a
large page, and CPA collapses it again right away. The split table has
been a kernel page table since commit 9e4a3ec3411b
("x86/mm/pat: Allocate split page tables as kernel page tables"), so the
collapse frees it through pagetable_free_kernel(), which queues work on
system_percpu_wq - still NULL at that point. That commit is correct in
itself; it only lets CPA reach pagetable_free_kernel() before the
workqueue that function relies on exists.
Keep putting the table on the list, but don't schedule the work while
the system is still booting. A core_initcall schedules it once to free
whatever was queued by then. |
| Null pointer dereference in Windows VMSwitch allows an authorized attacker to deny service locally. |
| Improper protection of alternate path in Windows AppX Deployment Service allows an authorized attacker to bypass a security feature locally. |
| Weak authentication in Active Directory Federation Services (AD FS) allows an unauthorized attacker to bypass a security feature over a network. |
| Use after free in Remote Desktop Client allows an unauthorized attacker to execute code over a network. |
| Heap-based buffer overflow in Windows Libarchive allows an unauthorized attacker to execute code over a network. |
| Untrusted pointer dereference in Windows Distributed File System (DFS) allows an unauthorized attacker to elevate privileges over a network. |
| Use after free in Windows Broadcast DVR User Service allows an authorized attacker to elevate privileges locally. |
| IBM Carbon Charts 0.4.0 through 1.27.19 is vulnerable to cross-site scripting. The MeterChart component's Title.truncateTitle() function re-inserts a substring of user-supplied label text into the DOM via an unsanitized innerHTML write when the title exceeds the available container width. A remote attacker could exploit this vulnerability to execute arbitrary JavaScript in the victim's browser session. |
| boneIO Black is vulnerable to Cross-Site Request Forgery (CSRF) on all state-changing API endpoints because it lacks CSRF tokens and does not validate Origin or Referer headers. A remote attacker can craft a malicious webpage that, when visited by a user on the internal network, sends cross-origin requests to the device. This allows the attacker to reboot the controller, toggle relay circuits, control gates and blinds, or shut down the device, causing loss of integrity and availability. Critically, due to CVE-2026-77053 (authentication disabled by default), any user on the same internal network can trigger attacker-controlled actions by visiting the malicious website.
This issue was fixed in version 1.6.0. |
| boneIO black_debian_images ships with a Mosquitto MQTT broker that uses the same default credentials on all devices. These credentials are publicly documented on github, and there is no indication in the instructions to change them. A remote attacker can use them to gain full read and write access to the broker, allowing control of connected relays, blinds, and gates, and injection of fake entities into a linked Home Assistant installation.
This issue was fixed in version 1.6.0 of the image: MQTT passwords are generated per device at first boot. Devices upgraded from earlier versions keep their existing broker credentials; from boneio 1.6.0 the web panel reports credentials that are still the published defaults, and the owner has to change them. |
| boneIO Black stores passwords, including the MQTT broker and web panel passwords, in cleartext. The GET /api/config endpoint returns the full configuration with sub-services passwords exposed. Any authenticated user can call the endpoint and access the administrative passwords in cleartext form. Critically, due to CVE-2026-77053 (authentication disabled by default), an unauthenticated attacker on the same local network can retrieve all passwords.
This issue was fixed in version 1.6.0: web panel passwords are stored as salted scrypt hashes in a file readable only by the service account, and the API and logs no longer return secret values. The MQTT broker password has to stay recoverable because the application presents it to the broker as a client; it is kept in a separate file readable only by the service account and is no longer exposed through the API. |
| In Splunk SOAR versions below 8.7.0, an authenticated user could change the Enterprise Security edition through the Representational State Transfer (REST) API and cause Splunk SOAR to apply the license change.
The vulnerability is possible because Splunk SOAR authenticates requests to manage the Enterprise Security edition but does not authorize the caller before it applies the license change.
For more information see Using the REST API reference for Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/rest-api-reference/8.7.0/using-the-splunk-soar-rest-api/using-the-rest-api-reference-for-splunk-soar-on-premises), Obtain and configure a Splunk SOAR (On-premises) license (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.7.0/configure-your-companys-settings-in-splunk-soar-on-premises/obtain-and-configure-a-splunk-soar-on-premises-license), and Integration of Splunk SOAR with Splunk Enterprise Security (https://help.splunk.com/en/splunk-enterprise-security-8/administer/8.7/automation-with-playbooks/integration-of-splunk-soar-with-splunk-enterprise-security) in the Splunk documentation. |
| In Splunk SOAR versions below 8.7.0, an authenticated user who does not hold a role with permission to edit Automation Brokers could download the Splunk SOAR Automation Broker Docker Compose configuration file. The file contains the Uniform Resource Locator (URL) of the Splunk SOAR instance, the container image location, and the Splunk SOAR Automation Broker version.
The vulnerability is possible because Splunk SOAR returns the configuration file without enforcing the Automation Broker edit permission.
For more information see Install Splunk Automation Broker on a Docker host (https://help.splunk.com/en/splunk-soar/splunk-automation-broker/install-and-create-classic-splunk-soar-automation-brokers/install-splunk-automation-broker-on-a-docker-host) and Manage roles and permissions in Splunk SOAR (On-premises) (https://help.splunk.com/en/splunk-soar/soar-on-premises/administer-soar-on-premises/8.5.0/manage-your-splunk-soar-on-premises-users-and-accounts/manage-roles-and-permissions-in-splunk-soar-on-premises) in the Splunk documentation. |
| In Splunk Enterprise versions below 10.4.4, 10.2.8, 10.0.11, and 9.4.16, a user who does not hold the "admin" or "power" Splunk roles could create, move, edit, or delete sourcetype renaming configurations that they own in apps that they do not have permission to access.
The vulnerability is possible when Splunk Web is turned on because Splunk Web does not verify the required app permissions before it performs sourcetype renaming operations.
For more information see Rename source types at search time (https://help.splunk.com/en/splunk-enterprise/get-started/get-data-in/10.6/configure-source-types/rename-source-types-at-search-time) in the Splunk documentation. |
| The root-privileged `wsserver` terminal-bridge daemon builds a shell command from client-supplied WebSocket fields and passes it to `system()` and `popen()` without quoting, escaping, or character-set validation. The daemon's public-key session path performs no appliance-session check. |
| Open5GS 2.6.1 through 2.8.0 contains an out-of-bounds read vulnerability in parse_scheme_output() in lib/sbi/conv.c during SUCI de-concealment due to incomplete length validation. Remote unauthenticated UEs or SBI peers can submit a crafted SUCI with a 42-byte scheme output to a UDM, triggering a heap over-read past the buffer. |
| A vulnerability was determined in iFlytek astron-agent up to 1.1.2. This affects an unknown function of the file core/memory/database/api/v1/exec_ddl.py of the component DDL Whitelist Handler. This manipulation causes incomplete blacklist. The attack may be initiated remotely. The exploit has been publicly disclosed and may be utilized. The vendor was contacted early about this disclosure but did not respond in any way. |
