Export limit exceeded: 413834 CVEs match your query. Please refine your search to export 10,000 CVEs or fewer.
Search
Search Results (413834 CVEs found)
| CVE | Vendors | Products | Updated | CVSS v3.1 |
|---|---|---|---|---|
| CVE-2026-99007 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/fb-helper: defer setup when fbdev_probe() fails, not just on -EAGAIN __drm_fb_helper_initial_config_and_unlock() calls drm_client_modeset_probe() first, which already fills in each mode_set->mode/num_connectors for every connected output, and only afterwards calls drm_fb_helper_single_fb_probe() to create fb_helper->fb and wire it into those mode_sets via drm_setup_crtcs_fb(). If drm_fb_helper_single_fb_probe() fails with anything other than -EAGAIN (e.g. dev->driver->fbdev_probe() itself fails), the function bails out before drm_setup_crtcs_fb() runs and before setting fb_helper->deferred_setup. The client is left with mode_sets that have a mode and connectors but mode_set->fb == NULL, and nothing marks this fb_helper as needing a retry. __drm_fb_helper_restore_fbdev_mode_unlocked() only skips committing when fb_helper->deferred_setup is set, so a later .restore() call (drm_lastclose() on process exit, in this report) commits the stale mode_set through drm_client_modeset_commit() -> drm_client_modeset_commit_atomic() -> __drm_atomic_helper_set_config(), which hits WARN_ON(!set->fb). Mark fb_helper->deferred_setup on any drm_fb_helper_single_fb_probe() failure, not just -EAGAIN, so restore keeps skipping the commit until a later hotplug event successfully re-probes and re-populates mode_set->fb. The real error code is still returned to the caller unchanged. | ||||
| CVE-2026-99006 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gem: Prevent overstepping exec array boundary It is possible for eb_relocate_parse_slow() to call kvfree() on entries outside the original exec array during following scenario inside eb_relocate_parse_slow(): 1) eb_copy_relocations() allocates as many as eb->buffer_count copies for exec entries; 2) eb_parse() appends up to two VMAs, right after incrementing eb->buffer_count; 3) cleanup under "out" label uses this incremented buffer_count to release relocation pointers from exec array via kvfree(), not from VMA array. To amend this problem, ensure that relocation cleanup uses the original exec object count, excluding the VMAs appended by the command parser. (cherry picked from commit 2a0158925fb943c7ba8f3216e2734952128defc9) | ||||
| CVE-2026-99005 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/i915/gt: Unmask interrupts only when ACTIVE is true There is a small race window between intel_rps_boost() reading a stale ACTIVE state and queuing rps->work, where ACTIVE may be changed via asynchronous calls triggered by wakeref drop. This means that rps_work() could be triggered after the GT has been parked, so unmasking RPS PM interrupts would happen without holding PM wakelock. This sequence of events may be observed during live_rc6_ctx_wa() selftest: 1) live_rc6_ctx_wa() -> intel_engine_pm_put() -> wakeref_put() ASYNC1) wakeref_put() callback -> __engine_park() -> intel_gt_pm_put_async() -> intel_gt_pm_put_async_untracked() -> intel_wakeref_put_async() ASYNC2) wakeref_put_async() callback -> __gt_park() -> intel_rps_park() -> intel_rps_clear_active() [clear ACTIVE] WITH INTERRUPTS: -> rps_disable_interrupts() -> cancel_work_sync(rps->work) -> rps_reset_interrupts() [rps->pm_iir = 0] WITHOUT INTERRUPTS (TIMER mode): -> rps_stop_timer() -> cancel_work_sync(rps->work) 2) live_rc6_ctx_wa() -> intel_gt_wait_for_idle() -> intel_gt_retire_requests_timeout() -> dma_fence_wait_timeout() -> ops->wait() [i915_fence_wait()] -> i915_request_wait_timeout() -> intel_rps_boost() -> intel_rps_is_active() [check ACTIVE] [OPEN RACE WINDOW] -> queue_work(rps->work) -> retire_requests() -> i915_request_retire() -> intel_rps_dec_waiters() [from 1 to 0] If ASYNC1 and ASYNC2 would execute during [OPEN RACE WINDOW], then: 3) rps_work() executes from the workqueue and may satisfy "(!pm_iir && !client_boost)" test (in TIMER mode rps->pm_iir is zeroed by an earlier rps_work() call or never gets a new value after previous intel_rps_unpark() event), so it jumps to "out" label, bypassing intel_rps_is_active() guard and executes gen6_gt_pm_unmask_irq(); 4) GT is parked and runtime PM wakelock is dropped, so only a raw reference in __gt_park() -> intel_display_power_put_async() remains for 100ms, then the MMIO write in gen6_gt_pm_unmask_irq() detects missing wakelock via assert_rpm_wakelock_held() and emits "RPM wakelock ref not held during HW access" tainting kernel. Commit 3e7abf814193 ("drm/i915: Extract GT render power state management") dropped the "if (rps->interrupts_enabled)" guard that gen6_pm_rps_work() had around this unmask in i915_irq.c. INTEL_RPS_ACTIVE brackets the same window, since it is set in intel_rps_unpark() before rps_enable_interrupts() and rps_start_timer() and cleared in intel_rps_park() before rps_stop_timer() and rps_disable_interrupts(). Skip unmasking when RPS is no longer active (reaching unmask operation is independent of INTERRUPT mode). This does not prevent RPS operation from resuming on the next unpark. In interrupt mode, intel_rps_unpark() calls rps_enable_interrupts(), which enables and unmasks the PM interrupts. In timer mode, it calls rps_start_timer(), restarting periodic engine-busyness evaluation. The timer generates software RPS events and queues rps_work() directly, independently of PM interrupt delivery. Neither mode requires the late worker to unmask interrupts while the GT is parked (cherry picked from commit ca4a6deadad15b91ee083afe445fa6bdbfb68206) | ||||
| CVE-2026-99004 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/imagination: Size page table preallocation by device address Commit 0a8224058a58 ("drm/imagination: Fix page count for page table for map() interface") passed the device address to pvr_mmu_op_context_create(), but the preallocation is still sized from device_addr + sgt_offset with an exclusive end. The offset into the object's pages has no place in a device-virtual range, and the exclusive end allocates one table too many when the range ends on a table boundary. Count the tables from device_addr and the inclusive end of the range. The new calculation does not take page table indices into account. This fixes another issue with the previous implementation, where the difference between start and end indices could underflow when a mapping crossed a page table boundary. This would lead to the driver preallocating a huge number of MMU pages, exhausting system memory and triggering an out of memory panic. [Alessio: add paragraph to point out OOM bug being fixed, cc stable] | ||||
| CVE-2026-99003 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/panthor: validate userspace queue count against initialized firmware slot count In panthor_drv.c:panthor_ioctl_group_create(), the queue count is validated against the hardcoded maximum: if (!args->queues.count || args->queues.count > MAX_CS_PER_CSG) return -EINVAL; However, if the firmware reports fewer slots than MAX_CS_PER_CSG, panthor_fw_init_ifaces() will only initialize that smaller number of stream interfaces. If unprivileged userspace requests more queues than the firmware reported (but no more than MAX_CS_PER_CSG), cs_slot_prog_locked() fetches an uninitialized stream interface and may crash when dereferencing cs_iface->input->ringbuf_base. | ||||
| CVE-2026-99002 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/vmwgfx: validate pitch coming from userspace Validate the pitch, alongside the box dimensions before trying to copy data from the underlying surface. Fixes possible out of bounds reads with cursor snooping. | ||||
| CVE-2026-99001 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe/i2c: cancel the client work on remove xe_i2c_notifier() stores the DesignWare adapter in i2c->adapter and schedules i2c->work when the adapter is registered under the xe I2C platform device, and xe_i2c_client_work() then instantiates the AMC client device on that adapter. xe_i2c_remove() tears down the AMC, unregisters the client devices, the bus notifier and the adapter platform device, but it never drains i2c->work. A work item that is still queued or running when the adapter is unregistered dereferences i2c->adapter in i2c_new_client_device() after platform_device_unregister() has released the adapter. The work item is also embedded in the devm-allocated struct xe_i2c, so a work item still queued after the drm device devm unwind frees that allocation runs its callback on freed memory. The bus notifier is the only thing that schedules this work, and it is unregistered after the client devices. An instance that is still queued when the teardown runs can therefore write i2c->client[XE_I2C_CLIENT_AMC] while the loop is unregistering and clearing the same array, and an AMC client it instantiates late is only cleaned up by the adapter's own child sweep in i2c_del_adapter(). Move bus_unregister_notifier() in front of the client teardown loop and cancel the work right after it, so no new instance can be scheduled and a queued instance is drained before the client array is touched. A running instance still finds a live adapter, since the adapter is unregistered later. (cherry picked from commit a23f27d5ec11c3f418c5e5531eea34ccda2b5b20) | ||||
| CVE-2026-99000 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix shrinker accounting double-subtraction on nested external pins xe_bo_pin_external() and xe_bo_unpin_external() support nested pins, since the underlying ttm_bo_pin()/ttm_bo_unpin() maintain a pin_count refcount rather than a boolean. However, the shrinker accounting calls xe_ttm_tt_account_subtract() and xe_ttm_tt_account_add() are invoked unconditionally on every pin_external()/unpin_external() call, instead of only on the transition into and out of the pinned state. An external BO (dma-buf) can be pinned more than once while already pinned, for example when it has multiple attachments/importers, each independently calling xe_bo_pin_external(). Each such nested pin subtracts the BO's pages from the shrinker's accounting again, even though the BO's pages were already removed from consideration by the first pin. Symmetrically, each nested unpin adds them back again before the BO is actually unpinned. This desynchronizes the shrinker's page and object counts from reality, and since they are declared as signed long but interpreted as unsigned long in xe_shrinker_count(), the underflow can turn into an enormous shrinkable/purgeable page count, causing the shrinker to be invoked excessively under memory pressure. Guard the accounting calls with the same pin-count transition checks already used to guard the pinned_link list maintenance, so accounting is only updated on the outermost pin and the final unpin. While centralizing this logic into xe_bo_account_pin()/ xe_bo_account_unpin(), also close a second, related accounting gap affecting imported dma-bufs. For an imported bo's ttm_tt, xe's ttm_tt_populate hook (xe_ttm_tt_populate()) early-returns without calling xe_ttm_tt_account_add(), since TTM_TT_FLAG_EXTERNAL is set without TTM_TT_FLAG_EXTERNAL_MAPPABLE. However, TTM core's ttm_tt_populate() wrapper unconditionally marks the tt as populated on driver-hook success, so ttm_tt_is_populated() still reports true for it. xe_bo_account_pin()/xe_bo_account_unpin() trusted ttm_tt_is_populated() as a proxy for "these pages are accounted for by the shrinker", and would subtract/add pages for such a tt that were never added in the first place, again underflowing the shrinker's counts. This is reachable today via xe_bo_pin_external(), and would have become newly reachable via the fb-pin path once this patch routes __xe_pin_fb_vma() through xe_bo_pin_account() below, so fix it here rather than in a later patch, to avoid a commit in this series that introduces the regression before fixing it. Skip the accounting for imported bos, using the same EXTERNAL && !EXTERNAL_MAPPABLE test xe_ttm_tt_populate()/xe_ttm_tt_unpopulate() use to decide whether to act, via a new xe_ttm_bo_is_imported() helper (hoisted up from its only prior use site). v2: - Fix the critical issue caught by Sashiko AI review: the pin-count transition check introduced here was still bypassed by the fb-pin path (__xe_pin_fb_vma()/__xe_unpin_fb_vma()), which could leave a stale pinned_link entry and a permanent shrinker accounting leak when the fb-unpin performed the true last unpin. Addressed in a separate follow-up patch in this series rather than folded in here, since it is a distinct bug with its own Fixes: tag. - Drop the unneeded local "last_unpin" variable in xe_bo_unpin_external(), restoring the original inline bo->ttm.pin_count == 1 check; it was a no-op rename not used by any of the new accounting helpers, and was going to be deleted again by the follow-up patch anyway. v3: - Exclude imported dma-bufs from the pin/unpin shrinker accounting, fixing another underflow caught by Sashiko AI review. - Add a short comment on the backup-object pin site noting it's already populated/accounted at pin time, addressing (as a false-positive clarification, no code fix needed) a separate Medium-severity accounting-leak concern also caught by Sashiko AI ---truncated--- | ||||
| CVE-2026-98999 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/xe: Fix stale pinned_link entry when fb-pin performs the final unpin xe_bo_pin_external() and xe_bo_unpin_external() maintain the bo's pinned_link list membership in xe->pinned.late.external, based on whether the current call is the outermost pin or the final unpin. However, the same external bo's pin_count can also be raised and lowered directly by __xe_pin_fb_vma()/__xe_unpin_fb_vma(), which pin the bo as a display scanout buffer without going through xe_bo_pin_external()/xe_bo_unpin_external() at all, and have no notion of, or ownership over, pinned_link. If a bo is pinned both externally (e.g. dma-buf export) and as an fb, and the external unpin happens first, xe_bo_unpin_external() correctly observes pin_count > 1 and leaves the bo on pinned_link. When the fb unpin later performs the true last unpin (pin_count 1 -> 0), it never touches pinned_link, leaving the bo linked on xe->pinned.late.external indefinitely. Once the bo is subsequently freed, this stale list entry points into freed memory, corrupting the list and risking a use-after-free the next time the list is walked or spliced. The backup object pin/unpin sites in xe_bo_notifier_prepare_pinned()/ xe_bo_notifier_unprepare_pinned() have the same bypass characteristic, though they never add their bo to a pinned list, so are not affected by this particular list-corruption issue. Move the pinned_link removal into xe_bo_account_unpin(), which already runs on every unpin path (kernel, external, framebuffer, backup object) right before the true 1 -> 0 pin_count transition. Since list_del_init() only operates on the node itself, this removal is list-agnostic and safe to perform regardless of which list (external or kernel_bo_present) the bo happens to be linked on, or which code path is performing the final unpin. Drop the now-redundant explicit list_del_init() calls in xe_bo_unpin_external() and xe_bo_unpin(). v2: - New patch v3: - Rebased on changes to previous patch. (cherry picked from commit ca58d36a1f93af586ee93b340c9f9fd81312cc01) | ||||
| CVE-2026-98998 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/bridge: th1520-dw-hdmi: Fix remove() callback This driver stores struct th1520_hdmi * in platform drvdata, but th1520_dw_hdmi_remove() was reading it back as struct dw_hdmi * and passing it to dw_hdmi_remove(), so teardown runs on the wrong pointer. Retrieve struct th1520_hdmi * from platform drvdata and pass hdmi->dw_hdmi to dw_hdmi_remove(). | ||||
| CVE-2026-98997 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: drm/amdgpu/userq: only accept doorbell BOs as queue doorbell amdgpu_userq_get_doorbell_index() pins any BO passed as doorbell_handle into the doorbell domain. For a regular BO, TTM moves it with ttm_bo_move_null() and its contents are lost. Since an importer on the same device gets the exporter's GEM object, a client can do this to a buffer another client shared with it. Reject BOs that were not created in the doorbell domain. v2: drop the error message, use a local abo variable (Christian) (cherry picked from commit f7497bbc19db4821c62b9d97b31c9086feb2d917) | ||||
| CVE-2026-98996 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: fs: don't silently unmount busy mounts The propagate_mount_busy() helper exists to decide whether a synchronous can suceed. It does that by looking at the copies of the victims in the mounts its parent propagates to. One of those functions from propagation hell. It skips a copy that has child mounts except for the case of a single child mount covering the copy's root. That algorithm used to be exact. It isn't anymore. Originally only childless copies were unmounted during propagation. And 1064f874abc0 ("mnt: Tuck mounts under others instead of creating shadow/side mounts.") ended up adding covered mounts to both sides in one go. Along came 99b19d16471e ("mnt: In propgate_umount handle visiting mounts in any order") and that started to unmount more than before: [1]: A copy of a mount is unmounted when each of its children is either its overmount or a copy of the victim itself. In the former case the overmount gets reparented. In the latter case the copy of the victim will end up being unmounted. So propagate_umount() ended up being rewritten without adjusting propagate_mount_busy(). And currently propagate_mount_busy() doesn't look at copies of the victim that have two or more children nor a single child that is not the overmount. So any such copy in [1] is not checked for references. The result is that a synchronous unmount succeeds, pulling out a mount that is still in use. A container can run into this with its own mounts. The host shares a tree with the container and the host has a mount in that tree: mount -t tmpfs none /mnt mount --make-shared /mnt mount -t tmpfs none /mnt/a The container's /mnt is a slave copy of the host mount. The container now takes a detached copy of the tree and mounts that copy beneath its propagated copy of /mnt/a and keeps the file descriptor to the tree open: unshare -m --propagation unchanged mount --make-rslave / fd = open_tree(AT_FDCWD, "/mnt", OPEN_TREE_CLONE | AT_RECURSIVE) move_mount(fd, "", AT_FDCWD, "/mnt/a", MOVE_MOUNT_BENEATH) grep /mnt /proc/self/mountinfo 775 355 ... /mnt ... master:646 777 775 ... /mnt/a ... master:646 776 777 ... /mnt/a ... master:647 778 777 ... /mnt/a/a ... master:647 The now attached tree (777) is now mounted beneath the container's copy of /mnt/a. That's also where the host mount sits (as seen from the host mount namespace). So the propagated copy (776) of the host's mount is on top of its root and the copy of that (778) is inside it. Now the host runs: umount /mnt/a and it succeeds. The moved tree tree and the copy inside of it are gone from the container. Now only the propagated copy is left and it got reparented to where it was before: grep /mnt /proc/self/mountinfo 775 355 ... /mnt ... master:646 776 775 ... /mnt/a ... But the file descriptor still refers to the moved tree. So a synchronous umount detached a mount that is still in use. Teach propagate_mount_busy() the same checks that propagate_umount() does. It now checks for a single victim mount without children for which it can assume that MNT_LOCKED is cleared on every copy like propagate_umount() does. The copies form chains. IOW, when a copy itself receives propagation from the victim's parent then the mount at the same mountpoint inside that copy is a copy as well. Whether a mount receives propagation from the victim's can simply be checked by walking its masters. Walk each chain once from its top so we are sure that nested copies stay linear. Check every reference once of every copy that gets unmounted. | ||||
| CVE-2026-98995 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: reset the old parent's ->overmount in mnt_change_mountpoint() __umount_mnt() resets ->overmount of the parent when it unmounts the mount that overmounts it. mnt_change_mountpoint() doesn't. It moves the mount to its new parent and leaves the old one pointing at it. For a mount that is moved beneath in attach_recursive_mnt() that doesn't matter. The new mount has already reset ->overmount of the old parent by the time the old top mount is moved onto it. It matters for reparent() though. propagate_umount() moves a surviving overmount onto the first ancestor that isn't going to be unmounted. The mount it was taken from is unmounted immediately afterwards. If a file descriptor keeps that unmounted mount alive ->overmount points at the moved mount. That's a dangling pointer and UAF as the moved mount is unmounted and freed. do_lock_mount() follows ->overmount from the target path under mount_lock. With a file descriptor on such a mount as the target of a mount beneath topmost_overmount() walks into the freed mount and do_lock_mount() takes references on whatever it finds there. So reset ->overmount of the old parent in mnt_change_mountpoint() the same way __umount_mnt() does. A mount's ->overmount is then always a mount that is attached to it. | ||||
| CVE-2026-98994 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: statmount: read the parent of an unmounted mount under mount_lock statmount_mnt_basic() reads the ids of the parent through m->mnt_parent with namespace_sem held for reading. That's fine for a mount that is in a namespace. Everything above it is pinned by that namespace. STATMOUNT_BY_FD also accepts a file descriptor on a mount that has been unmounted on purpose and that only the file descriptor keeps alive. If that mount stayed attached to its parent when it was unmounted the parent is unmounted as well and nothing pins it for the child. The final mntput() unmounts the children under mount_lock alone and frees the parent afterwards. Concurrently, statmount_mnt_basic() reads m->mnt_parent twice while that can happen and can easily dereference a mount that's already gone. Read the parent of an unmounted mount under mount_lock. The parent can't be put while it is held and both ids come from the same mount. A mounted mount's parent is pinned by the namespace and a mount can't leave its namespace while namespace_sem is held, so the common case takes no global lock. | ||||
| CVE-2026-98993 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't inherit MNT_UMOUNT in clone_mnt() MNT_UMOUNT gets raised on a mount that umount_tree() or umount_one() has taken out of its namespace. It's never cleared. __detach_mounts() unhooks a mount that carries it instead of unmounting it. disconnect_mount() lets an unmounted child stay attached only if its parent carries it. propagate_umount() takes it as the sign that a mount is going to be unmounted when it decides what else can be unmounted, where a chain of locked mounts ends and where a for reparenting an overmount. clone_mnt() copies the flags of the source and only masks MNT_INTERNAL_FLAGS which doesn't include MNT_UMOUNT. A mount that was lazily unmounted but is kept alive by a file descriptor can still be copied when its root is an nsfs or pidfs file because may_copy_tree() accepts those before checking whether the source is mounted at all: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --bind /proc/self/fd/3 /tmp/y The mount on /tmp/y is attached to the caller's namespace with MNT_UMOUNT already set and every copy of it inherits the flag again. That causes a number of bugs: - Unlink its mountpoint from a mount namespace where it isn't one. __detach_mounts() takes it for a mount that was unmounted earlier, unhooks it from its parent and drops the reference the namespace holds on it. It stays in the namespace with one reference too few and as its own parent, so it can't be unmounted through the file descriptor anymore and the namespace never finds it again. When the namespace goes away it's leaked and points to a freed struct mnt_namespace that may_change_propagation() and anon_ns_root() read on the next propagation change or mount_setattr() through the file descriptor. - Make it shared and unmount a peer. trace_transfers() follows the flag from the peer into it and strips it from its peer group. - Let a propagated umount reach it. gather_candidates() marks it with T_UMOUNT_CANDIDATE but never puts it on the candidate list, so the mark is never cleared and every later propagated umount skips it. If it's the parent of a locked mount handle_locked() takes it as the cutoff and commits the locked child that should have stayed and disconnect_mount() leaves that child attached to it, unmounted under a mounted parent, which is what disconnect_mount() exists to prevent. When the namespace goes away umount_tree() visits the child a second time. And once __detach_mounts() has made it its own parent reparent() never finds the end of the chain of unmounted parents. A clone is a new mount that has never been unmounted. Add MNT_UMOUNT to MNT_INTERNAL_FLAGS so clone_mnt() never copies it. And warn when umount_tree() reaches a mount that already has it set. | ||||
| CVE-2026-98992 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: don't copy an unmounted mount tree may_copy_tree() accepts a mount whose root is an nsfs or pidfs file before it checks whether that mount is mounted. This exception exists for nsfs and pidfs mounts. They are part of no mount namespace so neither check_mnt() nor is_mounted() would let them through and bind-mounting a nsfsfd or a pidfd wouldn't work. Problem is that exception also admits a bind mount of such a file when it was lazily unmounted and is only kept alive by a file descriptor: mount --bind /proc/self/ns/net /tmp/x exec 3< /tmp/x umount -l /tmp/x mount --rbind /proc/self/fd/3 /tmp/y With MS_REC or AT_RECURSIVE copy_tree() doesn't stop at the unmounted mount. It copies every mount that stayed attached to it as well. So if you have a bunch of overmounts over the nsfsfd or the pidfd the whole unmounted stack is copied. That's a bug. So refuse to walk an unmounted tree. Copying its root alone stays possible. So a bind mount of a namespace that is gone can still be recreated from a file descriptor on the old one. The file descriptor pins that mount and its root and __has_locked_children() only reads the direct children which don't leave the parent's list without namespace_sem. The internal mounts carry MNT_NS_INTERNAL instead of NULL and are still walked. Copying an unmounted tree recursively fails with EINVAL. | ||||
| CVE-2026-98991 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: queue a mount only once for mount notifications mnt_notify_add() puts a mount on notify_list. It doesn't check whether the mount is on the list already. That's fine as long as every mount is queued at most once per namespace_sem hold. It isn't. propagate_umount() moves a surviving overmount off a stack of mounts that are going away and queues it as moved. shrink_submounts() and mark_mounts_for_expiry() call umount_tree() for several mounts under a single namespace_sem hold. So the second umount_tree() can take down exactly the mount the first one reparented, reparent it once more and so end up queueing it a second time. The second list_add_tail() cuts the mounts queued in between out of the list while the head still points at the last of them. notify_mnt_list() then only visits that one mount and the others are freed after the grace period with notify_list still pointing at them. Every later mount operation on the host walks freed memory: BUG: KASAN: slab-use-after-free in __list_add_valid_or_report Read of size 8 at addr ffff8881003d57e0 by task notify_dq/162 __list_add_valid_or_report+0x15c/0x1a0 mnt_add_to_ns+0x322/0x890 attach_recursive_mnt.isra.0+0xf2a/0x1a00 path_mount+0x139c/0x1d40 This needs a mount with MNT_SHRINKABLE to bind from. That's what finish_automount() creates (submounts of NFS, AFS and CIFS and the tracefs mount below debugfs). Bind mounts inherit the flag. A mount namespace with a FAN_MARK_MNTNS mark does the rest and root in a user namespace can have both. Initialize to_notify in alloc_vfsmnt() and leave a mount alone that is queued already. mnt_notify() looks at the state the mount has when the list is drained so a single entry per mount is enough. The move event for a mount that is unmounted under the same hold is lost. That's fine. The detach is what matters. | ||||
| CVE-2026-98990 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: check a submount for references right before unmounting it shrink_submounts() and mark_mounts_for_expiry() first collect all the mounts they are allowed to unmount and then unmount them. Whether a mount is busy is decided by propagate_mount_busy() on the tree. But unmounting the first mount changes the tree that the second one propagates into. propagate_umount() moves a surviving overmount off a copy it unmounts and mounts it where the copy was mounted. If that's where the propagated copy of the second victim is looked up the overmount becomes a candidate of the second umount_tree(). It's childless and so trim_one() commits it without looking at its reference count. So a synchronous umount pulls out a busy mount that is in use somewhere else and marks it MNT_SYNC_UMOUNT while it has users: umount2(/tmp/plshrink/p1, 0) = 0 errno 0 cwd is (unreachable) The same two umounts requested one after the other fail with EBUSY. This needs a mount with MNT_SHRINKABLE, i.e., automounted submounts of NFS, AFS and CIFS or the tracefs mount below debugfs. Bind mounts inherit the flag. Check each mount right before it is unmounted under the same hold of namespace_sem and mount_lock as the umount itself. Make sure that the algorithm stays linear. | ||||
| CVE-2026-98989 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: check a recursive bind mount for mount namespace loops do_loopback() refuses to bind mount the file of a mount namespace that is as old as the caller's or older because a mount namespace that holds a mount of its own file, or of an ancestor's, would cause a cycle. But it only checks the dentry the bind mount starts from. With MS_REC everything below it is copied and do_loopback() passes CL_COPY_MNT_NS_FILE so mount namespace files below the source are copied. That's fine for a source in the caller's own mount namespace. Every mount namespace file in there passed the same check when it was bind-mounted. It isn't fine for a source in another mount namespace. may_copy_tree() accepts a bind mount of any nsfs or pidfs file no matter what mount namespace it lives in so that /proc/<pid>/ns/<ns> and pidfds can be bind mounted. If we create a bind-mount stack of mount namespaces file descriptors the kernel will copy them irrespective of their ancestoral relationship to the mount namespace in question: 151 146 0:7 net:[4026531833] /tmp/nrc/y rw - nsfs nsfs rw 152 151 0:7 mnt:[4026532293] /tmp/nrc/y rw - nsfs nsfs rw Mount 152 is a mount of the mount namespace file of mount namespace 4026532293 inside mount namespace 4026532293. That namespace and every mount in it are leaked... All it takes is a process in an older mount namespace that stacks the file and repeating it leaks without limit: after control: Shmem: 380 kB child: mount(/proc/self/fd/6, MS_BIND|MS_REC): ok after cycle: Shmem: 65916 kB do_move_mount() runs check_for_nsfs_mounts() over a detached tree for exactly that reason. Do the same for the copy before it is grafted. | ||||
| CVE-2026-98988 | 1 Linux | 1 Linux Kernel | 2026-10-23 | N/A |
| In the Linux kernel, the following vulnerability has been resolved: namespace: keep covered mounts covered in OPEN_TREE_NAMESPACE open_tree(OPEN_TREE_NAMESPACE) creates a new mount namespace from a copy of the tree at the given path. The caller needs to be privileged over its current user namespace because the new mount namespace will be owned by it. It doesn't need to be privileged over the mount namespace the tree is copied from. An unprivileged user just needs to create a user namespace first. The copy follows the rules of a detached bind mount. Without AT_RECURSIVE only the mount itself is cloned and its children are left out. With AT_RECURSIVE unbindable mounts are skipped. Both is fine when the caller has privileges over the source mount namespace because it could unmount those mounts anyway. Not so for an unprivileged user in that mount namespace. For them a mount namespace copy is what unshare() does. copy_mnt_ns() copies everything including unbindable mounts and lock_mnt_tree() makes sure nothing can be unmounted in the copy. Nothing that was covered gets revealed. create_new_namespace() only does the locking and so the covered content is right there in the new mount namespace: # mount -t tmpfs none /tmp/otn; mkdir /tmp/otn/covered # echo hidden > /tmp/otn/covered/under.txt # mount -t tmpfs none /tmp/otn/covered uid 1000, after unshare(CLONE_NEWUSER): fd = open_tree(AT_FDCWD, "/tmp/otn", OPEN_TREE_NAMESPACE); setns(fd, CLONE_NEWNS); open("/covered/under.txt", O_RDONLY) -> "hidden" Covering paths with mounts is how container runtimes mask parts of /proc and /sys and how admins hide things. When the caller's user namespace doesn't own the source mount namespace copy the way unshare() does and refuse a non-recursive copy of a mount that has anything mounted below the requested directory and copy unbindable mounts in a recursive copy. A caller that is privileged over the source mount namespace sees no change. | ||||