| CVE |
Vendors |
Products |
Updated |
CVSS v3.1 |
| In the Linux kernel, the following vulnerability has been resolved:
ntfs: only count successfully cleared runs when freeing clusters
ntfs_cluster_free_from_rl_nolock() adds a run's length to nr_freed
whenever the error bookkeeping condition is false, which includes
cases where ntfs_bitmap_clear_run() actually failed - e.g. a second
run failing with the same errno as an earlier one, or any failure
after a non-ENOMEM error was already recorded. Since a failed
ntfs_bitmap_clear_run() rolls back its partial modifications, no
bits were cleared for that run, yet its length still inflates
vol->free_clusters, corrupting statfs output and the allocator's
free space gate.
Only count runs whose bitmap clear succeeded. |
| In the Linux kernel, the following vulnerability has been resolved:
security/keys: fix missed RCU read section on lookup
Nicholas Carlini reports that the keyring code calls assoc_array_find()
in find_key_to_update() without holding the RCU read lock, while the
assoc_array_gc() code really is designed around removing the node from
the tree and then freeing it after an RCU grace-period.
The regular key handling doesn't see this because holding the keyring
semaphore hides any lifetime issues, but the persistent key handling
uses a different model.
Instead of extending the keyring locking, just do the simple RCU locking
that the assoc_array was designed for. |
| In the Linux kernel, the following vulnerability has been resolved:
net: hsr: fix potential OOB access in supervision frame handling
Ensure the entire TLV header is linearized before access by adding
sizeof(struct hsr_sup_tlv) to the pskb_may_pull() calls. Without this,
a truncated frame could cause an out-of-bounds access. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: rss: fix indir_table and hkey leak on get_rxfh failure
rss_prepare_get() allocates the indirection table and hash key buffer
via rss_get_data_alloc(), then calls ops->get_rxfh() to populate them.
If get_rxfh() fails, the function returns an error without freeing
the allocation. |
| In the Linux kernel, the following vulnerability has been resolved:
ipvs: fix reversed sequence option serialization
hton_seq() expects the host-order source first and the unaligned
network-order destination second. The version 1 sync sender passes these
arguments in reverse for both sequence blocks. This leaves 24 bytes of the
kmalloc-backed message unwritten. It may disclose stale heap data and
replace the live connection sequence state with values read from the
buffer.
Pass the connection sequence state as the source and the message payload as
the destination for both blocks. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: eeprom: add more safeties to EEPROM Netlink fallback
The Netlink fallback path for reading module EEPROM
(fallback_set_params()) validates that offset < eeprom_len,
but does not check that offset + length stays within eeprom_len.
The ioctl equivalent (ethtool_get_any_eeprom() in ioctl.c) has
always enforced both bounds:
if (eeprom.offset + eeprom.len > total_len)
return -EINVAL;
This could lead to surprises in both drivers and device FW.
Add the missing offset + length validation to fallback_set_params(),
mirroring the ioctl.
Similarly - ethtool core in general, and ethtool_get_any_eeprom()
in particular tries to zero-init all buffers passed to the drivers
to avoid any extra work of zeroing things out. eeprom_fallback()
uses a plain kmalloc(), change it to zalloc. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: tsinfo: don't pass ERR_PTR to genlmsg_cancel on prepare failure
The goto err label leads to:
genlmsg_cancel(skb, ehdr);
return ret;
If ethnl_tsinfo_prepare_dump() failed, it has not started a genlmsg.
There's nothing to cancel, and passing an error pointer to
genlmsg_cancel() would cause a crash. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: coalesce: cap profile updates at NET_DIM_PARAMS_NUM_PROFILES
ethnl_update_profile() walks the ETHTOOL_A_PROFILE_IRQ_MODERATION
nest list with an index 'i' and writes new_profile[i++] without
bounding i. The destination is kmemdup()'d at NET_DIM_PARAMS_NUM_PROFILES
entries (5), but the Netlink nest count is entirely user-controlled.
Netlink policies do not have support for constraining the number
of nested entries (or number of multi-attr entries). |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in sysfs path
Since the start of the git history, brport_store() always acquired the
bridge lock. Back then this decision made sense: The bridge lock
protects the STP state of the bridge and its ports and at that time the
function was only used by two STP related attributes (cost and
priority).
Nowadays, brport_store() processes a lot more attributes and most of
them do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port: Only requires RTNL. Read locklessly by the data path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the two STP related attributes that require it. Remove the
now stale comment from br_switchdev_set_port_flag(). The
SWITCHDEV_F_DEFER flag can be removed in net-next.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 372, name: bash
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
5 locks held by bash/372:
#0: ffff88810c51c3f0 (sb_writers#7){.+.+}-{0:0}, at: ksys_write (fs/read_write.c:740)
#1: ffff888115ce9480 (&of->mutex){+.+.}-{4:4}, at: kernfs_fop_write_iter (fs/kernfs/file.c:343)
#2: ffff88810b9fd330 (kn->active#37){.+.+}-{0:0}, at: kernfs_fop_write_iter (fs/kernfs/file.c:80 fs/kernfs/file.c:344)
#3: ffffffffa59473a0 (rtnl_mutex){+.+.}-{4:4}, at: brport_store (net/bridge/br_sysfs_if.c:326)
#4: ffff8881099d2d58 (&br->lock){+...}-{3:3}, at: brport_store (./include/linux/spinlock.h:348 net/bridge/br_sysfs_if.c:345)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
store_learning (net/bridge/br_sysfs_if.c:79 net/bridge/br_sysfs_if.c:235)
brport_store (net/bridge/br_sysfs_if.c:346)
kernfs_fop_write_iter (fs/kernfs/file.c:352)
new_sync_write (fs/read_write.c:595)
vfs_write (fs/read_write.c:688)
ksys_write (fs/read_write.c:740)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
bridge: Fix sleep in atomic context in netlink path
Since the introduction of the netlink configuration path for bridge
ports in commit 25c71c75ac87 ("bridge: bridge port parameters over
netlink"), br_setport() was always called with the bridge lock held
around it. Back then this decision made sense: The bridge lock protects
the STP state of the bridge and its ports and at that time the function
only processed three STP related netlink attributes (cost, priority and
state).
Nowadays, br_setport() processes a lot more attributes and most of them
do not need the bridge lock:
* Bridge flags: Only require RTNL. Read locklessly by the data path.
Annotations can be added in net-next.
* FDB port flushing: Only requires the FDB lock.
* Multicast attributes: Only require the multicast lock.
* Group forward mask: Only requires RTNL. Read locklessly by the data
path. Annotations can be added in net-next.
* Backup port and NHID: Only require RTNL. Read locklessly by the data
path.
This is a problem as the bridge calls dev_set_promiscuity() when certain
bridge port flags change and this function can sleep since the commit
cited below, resulting in a splat such as [1].
Fix this by reducing the scope of the bridge lock and only take it when
processing the three STP related attributes that require it. This is
consistent with the multicast attributes where each attribute acquires
the multicast lock instead of having one critical section for all
relevant attributes.
[1]
BUG: sleeping function called from invalid context at net/core/dev_addr_lists.c:1262
in_atomic(): 1, irqs_disabled(): 0, non_block: 0, pid: 356, name: bridge
preempt_count: 201, expected: 0
RCU nest depth: 0, expected: 0
2 locks held by bridge/356:
#0: ffffffff919473a0 (rtnl_mutex){+.+.}-{4:4}, at: rtnetlink_rcv_msg (net/core/rtnetlink.c:80 net/core/rtnetlink.c:7002)
#1: ffff888115072d58 (&br->lock){+...}-{3:3}, at: br_setlink (./include/linux/spinlock.h:348 net/bridge/br_netlink.c:1117)
Preemption disabled at:
0x0
Hardware name: Bochs Bochs, BIOS Bochs 01/01/2011
Call Trace:
<TASK>
dump_stack_lvl (lib/dump_stack.c:94 lib/dump_stack.c:120)
__might_resched.cold (kernel/sched/core.c:9163)
netif_rx_mode_run (net/core/dev_addr_lists.c:1262)
netif_rx_mode_sync (net/core/dev_addr_lists.c:1428)
dev_set_promiscuity (net/core/dev_api.c:289)
br_manage_promisc (net/bridge/br_if.c:135 net/bridge/br_if.c:172)
br_port_flags_change (net/bridge/br_if.c:242 net/bridge/br_if.c:747)
br_setport (net/bridge/br_netlink.c:1000)
br_setlink (net/bridge/br_netlink.c:1118)
rtnl_bridge_setlink (net/core/rtnetlink.c:5572)
rtnetlink_rcv_msg (net/core/rtnetlink.c:7005)
netlink_rcv_skb (net/netlink/af_netlink.c:2550)
netlink_unicast (net/netlink/af_netlink.c:1318 net/netlink/af_netlink.c:1344)
netlink_sendmsg (net/netlink/af_netlink.c:1894)
__sock_sendmsg (net/socket.c:787 (discriminator 4) net/socket.c:802 (discriminator 4))
____sys_sendmsg (net/socket.c:2698)
___sys_sendmsg (net/socket.c:2752)
__sys_sendmsg (net/socket.c:2784)
do_syscall_64 (arch/x86/entry/syscall_64.c:63 arch/x86/entry/syscall_64.c:94)
entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:121) |
| In the Linux kernel, the following vulnerability has been resolved:
bonding: refuse to enslave CAN devices
syzbot reported a kernel paging request crash in
can_rx_unregister() inside net/can/af_can.c. The crash occurs
because a virtual CAN device (vxcan) is being enslaved to a
bonding master.
During the enslavement process, the bonding driver mutates
and modifies the network device states to fit an Ethernet-like
aggregation model. However, CAN devices operate on a completely
different Layer 2 architecture, relying on the CAN mid-layer
private data structure (can_ml_priv) instead of standard
Ethernet structures. Since bonding does not initialize or
maintain these CAN structures, subsequent operations on the
half-enslaved interface (such as closing associated sockets
via isotp_release) lead to a null-pointer dereference when
accessing the CAN receiver lists.
Bonding CAN interfaces is architecturally invalid as CAN lacks
MAC addresses, ARP capabilities, and standard Ethernet
link-layer mechanisms. While generic loopback devices are
blocked globally in net/core/dev.c, virtual CAN devices
bypass this check because they do not carry the IFF_LOOPBACK
flag, despite acting as local software-loopbacks.
Fix this by explicitly blocking network devices of type
ARPHRD_CAN from being enslaved at the very beginning of
bond_enslave(). This prevents illegal state mutations,
eliminates the resulting KASAN crashes, and avoids potential
memory leaks from incomplete socket cleanups.
As the CAN support has been added a long time after bonding
the Fixes-tag points to the introduction of ARPHRD_CAN that
would have needed a specific handling in bonding_main.c. |
| In the Linux kernel, the following vulnerability has been resolved:
Bluetooth: 6lowpan: check skb_clone() return value in send_mcast_pkt()
The skb_clone() function can return NULL if memory allocation fails.
send_mcast_pkt() calls skb_clone() without checking the return value, which
can lead to a NULL pointer dereference in send_pkt() when it dereferences
skb->data.
Add a NULL check after skb_clone() and skip the peer if the clone fails. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: do not assume transport header in iptunnel_pmtud_check_icmp()
In some cases, iptunnel_pmtud_check_icmp() can be called while
skb transport header is not set.
This triggers an out-of-bound access, because
(typeof(skb->transport_header))~0U is 65535.
Access the icmp header based on IPv4 network header,
after making sure icmp->type is present in skb linear part.
Note that iptunnel_pmtud_check_icmpv6()) is fine. |
| In the Linux kernel, the following vulnerability has been resolved:
tunnels: load network headers after skb_cow() in iptunnel_pmtud_build_icmp[v6]()
Sashiko found that iptunnel_pmtud_build_icmp() and
iptunnel_pmtud_build_icmpv6() were caching ip_hdr() and ipv6_hdr()
before an skb_cow() call which can reallocate skb->head.
Fix this possible UAF by initializing the local variables
after the skb_cow() call.
Remove skb_reset_network_header() calls which were not needed. |
| In the Linux kernel, the following vulnerability has been resolved:
ethtool: cmis: validate start_cmd_payload_size from module
The CMIS firmware update code reads start_cmd_payload_size from
the module's FW Management Features CDB reply and uses it directly
as the byte count for memcpy. The destination buffer is 112 bytes
(ETHTOOL_CMIS_CDB_LPL_MAX_PL_LENGTH - 8). So a malicious
module (or corrupted response) can cause a OOB write later on in
cmis_fw_update_start_download().
Let's error out. If modules that expect longer LPL writes actually
exist we should revisit.
struct cmis_cdb_start_fw_download_pl's definition has to move,
no change there. |
| A flaw was found in the Linux kernels implementation of audit rules, where a syscall can unexpectedly not be correctly not be logged by the audit subsystem |
| A memory disclosure flaw was found in the Linux kernel's ethernet drivers, in the way it read data from the EEPROM of the device. This flaw allows a local user to read uninitialized values from the kernel memory. The highest threat from this vulnerability is to confidentiality. |
| Commvault Web Server has an unspecified vulnerability that can be exploited by a remote, authenticated attacker. According to the Commvault advisory: "Webservers can be compromised through bad actors creating and executing webshells." Fixed in version 11.36.46, 11.32.89, 11.28.141, and 11.20.217 for Windows and Linux platforms. This vulnerability was added to the CISA Known Exploited Vulnerabilities (KEV) Catalog on 2025-04-28. |
| In the Linux kernel, the following vulnerability has been resolved:
tcp: fix use-after-free of retransmit_skb_hint in tcp_send_synack()
When tcp_send_synack() replaces the cloned SYN skb at the head of the
retransmit queue with a copy, it frees the original with
tcp_rtx_queue_unlink_and_free() and only repairs tp->highest_sack.
tp->retransmit_skb_hint keeps pointing at the freed
skbuff_fclone_cache object.
The dangling hint is read in tcp_verify_retransmit_hint() and used as
the root of the rbtree walk in tcp_xmit_retransmit_queue(). An
unprivileged TFO client (sendmsg(MSG_FASTOPEN)) can arm the hint with
an attacker-supplied ICMP fragmentation-needed message, after which a
simultaneous open frees the armed SYN skb:
BUG: KASAN: slab-use-after-free in tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
Read of size 4 at addr ffff88800604d928 by task swapper/1/0
Call Trace:
tcp_mark_skb_lost (net/ipv4/tcp_input.c:1316)
tcp_simple_retransmit (net/ipv4/tcp_input.c:3158)
tcp_v4_err (net/ipv4/tcp_ipv4.c:587)
Sync the hint to the copy. |
| In the Linux kernel, the following vulnerability has been resolved:
mm/hugetlb: preserve mremap address delta when skipping page tables
move_hugetlb_page_tables() optimizes mremap() by advancing to the last
entry in the page table when the source page table does not exist, either
initially or after unsharing a PMD table. The common loop increment then
steps to the first entry in the next page table.
However, the code advances both the source and destination addresses to
the last entries in their respective page tables, which is wrong. The
destination address must be advanced only by the same amount as the source
address.
If the source and destination offsets within their page tables differ, the
destination address can be advanced too far, causing follow-up issues.
Fix this by advancing the destination address by the source advance
distance.
With a reproducer, we were able to trigger a kernel panic on x86-64. With
this fix in place, we can no longer reproduce the issue. |
